From 297b60346df8beafee954a0fd7c2d64f33f3b9bc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:44:05 +0000
Subject: [PATCH] rtl8211F_led_control
---
kernel/arch/arm/mach-davinci/board-omapl138-hawk.c | 125 ++++++++++++++++++-----------------------
1 files changed, 54 insertions(+), 71 deletions(-)
diff --git a/kernel/arch/arm/mach-davinci/board-omapl138-hawk.c b/kernel/arch/arm/mach-davinci/board-omapl138-hawk.c
index 8e8d51f..88df801 100644
--- a/kernel/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/kernel/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -3,7 +3,7 @@
*
* Initial code: Syed Mohammed Khasim
*
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of
@@ -21,13 +21,13 @@
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/ti-aemif.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
-#include "cp_intc.h"
#include <mach/da8xx.h>
#include <mach/mux.h>
@@ -134,9 +134,9 @@
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
- GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd",
+ GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd",
GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp",
+ GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp",
GPIO_ACTIVE_LOW),
},
};
@@ -206,7 +206,7 @@
.core_chipsel = 1,
.parts = omapl138_hawk_nandflash_partition,
.nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
@@ -294,65 +294,62 @@
return platform_device_register(&omapl138_hawk_aemif_device);
}
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
-static da8xx_ocic_handler_t hawk_usb_ocic_handler;
-
static const short da850_hawk_usb11_pins[] = {
DA850_GPIO2_4, DA850_GPIO6_13,
-1
};
-static int hawk_usb_set_power(unsigned port, int on)
-{
- gpio_set_value(DA850_USB1_VBUS_PIN, on);
- return 0;
-}
+static struct regulator_consumer_supply hawk_usb_supplies[] = {
+ REGULATOR_SUPPLY("vbus", NULL),
+};
-static int hawk_usb_get_power(unsigned port)
-{
- return gpio_get_value(DA850_USB1_VBUS_PIN);
-}
+static struct regulator_init_data hawk_usb_vbus_data = {
+ .consumer_supplies = hawk_usb_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(hawk_usb_supplies),
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
-static int hawk_usb_get_oci(unsigned port)
-{
- return !gpio_get_value(DA850_USB1_OC_PIN);
-}
+static struct fixed_voltage_config hawk_usb_vbus = {
+ .supply_name = "vbus",
+ .microvolts = 3300000,
+ .init_data = &hawk_usb_vbus_data,
+};
-static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
- int irq = gpio_to_irq(DA850_USB1_OC_PIN);
- int error = 0;
+static struct platform_device hawk_usb_vbus_device = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &hawk_usb_vbus,
+ },
+};
- if (handler != NULL) {
- hawk_usb_ocic_handler = handler;
+static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
+ .dev_id = "ohci-da8xx",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
+ { }
+ },
+};
- error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
- IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "OHCI over-current indicator", NULL);
- if (error)
- pr_err("%s: could not request IRQ to watch "
- "over-current indicator changes\n", __func__);
- } else {
- free_irq(irq, NULL);
- }
- return error;
-}
+static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
+ { }
+ },
+};
+
+static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
+ &hawk_usb_oc_gpio_lookup,
+ &hawk_usb_vbus_gpio_lookup,
+};
static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
- .set_power = hawk_usb_set_power,
- .get_power = hawk_usb_get_power,
- .get_oci = hawk_usb_get_oci,
- .ocic_notify = hawk_usb_ocic_notify,
/* TPS2087 switch @ 5V */
.potpgt = (3 + 1) / 2, /* 3 ms max */
};
-
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id)
-{
- hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1);
- return IRQ_HANDLED;
-}
static __init void omapl138_hawk_usb_init(void)
{
@@ -369,39 +366,25 @@
pr_warn("%s: USB PHY CLK registration failed: %d\n",
__func__, ret);
+ gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
+ ARRAY_SIZE(hawk_usb_gpio_lookups));
+
ret = da8xx_register_usb_phy();
if (ret)
pr_warn("%s: USB PHY registration failed: %d\n",
__func__, ret);
- ret = gpio_request_one(DA850_USB1_VBUS_PIN,
- GPIOF_DIR_OUT, "USB1 VBUS");
- if (ret < 0) {
- pr_err("%s: failed to request GPIO for USB 1.1 port "
- "power control: %d\n", __func__, ret);
+ ret = platform_device_register(&hawk_usb_vbus_device);
+ if (ret) {
+ pr_warn("%s: Unable to register the vbus supply\n", __func__);
return;
}
- ret = gpio_request_one(DA850_USB1_OC_PIN,
- GPIOF_DIR_IN, "USB1 OC");
- if (ret < 0) {
- pr_err("%s: failed to request GPIO for USB 1.1 port "
- "over-current indicator: %d\n", __func__, ret);
- goto usb11_setup_oc_fail;
- }
-
ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
- if (ret) {
+ if (ret)
pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
- goto usb11_setup_fail;
- }
return;
-
-usb11_setup_fail:
- gpio_free(DA850_USB1_OC_PIN);
-usb11_setup_oc_fail:
- gpio_free(DA850_USB1_VBUS_PIN);
}
static __init void omapl138_hawk_init(void)
@@ -462,7 +445,7 @@
MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
.atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
- .init_irq = cp_intc_init,
+ .init_irq = da850_init_irq,
.init_time = da850_init_time,
.init_machine = omapl138_hawk_init,
.init_late = davinci_init_late,
--
Gitblit v1.6.2