From 297b60346df8beafee954a0fd7c2d64f33f3b9bc Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 01:44:05 +0000
Subject: [PATCH] rtl8211F_led_control
---
kernel/arch/arm/kernel/entry-ftrace.S | 134 +++++++++-----------------------------------
1 files changed, 28 insertions(+), 106 deletions(-)
diff --git a/kernel/arch/arm/kernel/entry-ftrace.S b/kernel/arch/arm/kernel/entry-ftrace.S
index efcd9f2..5f1b1ce 100644
--- a/kernel/arch/arm/kernel/entry-ftrace.S
+++ b/kernel/arch/arm/kernel/entry-ftrace.S
@@ -1,8 +1,4 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
#include <asm/assembler.h>
#include <asm/ftrace.h>
@@ -15,23 +11,8 @@
* start of every function. In mcount, apart from the function's address (in
* lr), we need to get hold of the function's caller's address.
*
- * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this:
- *
- * bl mcount
- *
- * These versions have the limitation that in order for the mcount routine to
- * be able to determine the function's caller's address, an APCS-style frame
- * pointer (which is set up with something like the code below) is required.
- *
- * mov ip, sp
- * push {fp, ip, lr, pc}
- * sub fp, ip, #4
- *
- * With EABI, these frame pointers are not available unless -mapcs-frame is
- * specified, and if building as Thumb-2, not even then.
- *
- * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount,
- * with call sites like:
+ * Newer GCCs (4.4+) solve this problem by using a version of mcount with call
+ * sites like:
*
* push {lr}
* bl __gnu_mcount_nc
@@ -41,21 +22,11 @@
* mcount can be thought of as a function called in the middle of a subroutine
* call. As such, it needs to be transparent for both the caller and the
* callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered. (In the __gnu_mcount_nc implementation, we
- * clobber the ip register. This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
*
- * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0"
- * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see
- * arch/arm/kernel/ftrace.c).
+ * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
+ * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
*/
-
-#ifndef CONFIG_OLD_MCOUNT
-#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4))
-#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0.
-#endif
-#endif
.macro mcount_adjust_addr rd, rn
bic \rd, \rn, #1 @ clear the Thumb bit if present
@@ -96,26 +67,25 @@
.macro __ftrace_regs_caller
- sub sp, sp, #8 @ space for PC and CPSR OLD_R0,
+ str lr, [sp, #-8]! @ store LR as PC and make space for CPSR/OLD_R0,
@ OLD_R0 will overwrite previous LR
- add ip, sp, #12 @ move in IP the value of SP as it was
- @ before the push {lr} of the mcount mechanism
-
- str lr, [sp, #0] @ store LR instead of PC
-
- ldr lr, [sp, #8] @ get previous LR
+ ldr lr, [sp, #8] @ get previous LR
str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
- stmdb sp!, {ip, lr}
- stmdb sp!, {r0-r11, lr}
+ str lr, [sp, #-4]! @ store previous LR as LR
+
+ add lr, sp, #16 @ move in LR the value of SP as it was
+ @ before the push {lr} of the mcount mechanism
+
+ push {r0-r11, ip, lr}
@ stack content at this point:
@ 0 4 48 52 56 60 64 68 72
- @ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+ @ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
- mov r3, sp @ struct pt_regs*
+ mov r3, sp @ struct pt_regs*
ldr r2, =function_trace_op
ldr r2, [r2] @ pointer to the current
@@ -138,11 +108,9 @@
#endif
@ pop saved regs
- ldmia sp!, {r0-r12} @ restore r0 through r12
- ldr ip, [sp, #8] @ restore PC
- ldr lr, [sp, #4] @ restore LR
- ldr sp, [sp, #0] @ restore SP
- mov pc, ip @ return
+ pop {r0-r11, ip, lr} @ restore r0 through r12
+ ldr lr, [sp], #4 @ restore LR
+ ldr pc, [sp], #12
.endm
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -158,11 +126,9 @@
bl prepare_ftrace_return
@ pop registers saved in ftrace_regs_caller
- ldmia sp!, {r0-r12} @ restore r0 through r12
- ldr ip, [sp, #8] @ restore PC
- ldr lr, [sp, #4] @ restore LR
- ldr sp, [sp, #0] @ restore SP
- mov pc, ip @ return
+ pop {r0-r11, ip, lr} @ restore r0 through r12
+ ldr lr, [sp], #4 @ restore LR
+ ldr pc, [sp], #12
.endm
#endif
@@ -209,51 +175,6 @@
mcount_exit
.endm
-#ifdef CONFIG_OLD_MCOUNT
-/*
- * mcount
- */
-
-.macro mcount_enter
- stmdb sp!, {r0-r3, lr}
-.endm
-
-.macro mcount_get_lr reg
- ldr \reg, [fp, #-4]
-.endm
-
-.macro mcount_exit
- ldr lr, [fp, #-4]
- ldmia sp!, {r0-r3, pc}
-.endm
-
-ENTRY(mcount)
-#ifdef CONFIG_DYNAMIC_FTRACE
- stmdb sp!, {lr}
- ldr lr, [fp, #-4]
- ldmia sp!, {pc}
-#else
- __mcount _old
-#endif
-ENDPROC(mcount)
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(ftrace_caller_old)
- __ftrace_caller _old
-ENDPROC(ftrace_caller_old)
-#endif
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-ENTRY(ftrace_graph_caller_old)
- __ftrace_graph_caller
-ENDPROC(ftrace_graph_caller_old)
-#endif
-
-.purgem mcount_enter
-.purgem mcount_get_lr
-.purgem mcount_exit
-#endif
-
/*
* __gnu_mcount_nc
*/
@@ -273,16 +194,17 @@
.endm
.macro mcount_exit
- ldmia sp!, {r0-r3, ip, lr}
- ret ip
+ ldmia sp!, {r0-r3}
+ ldr lr, [sp, #4]
+ ldr pc, [sp], #8
.endm
ENTRY(__gnu_mcount_nc)
UNWIND(.fnstart)
#ifdef CONFIG_DYNAMIC_FTRACE
- mov ip, lr
- ldmia sp!, {lr}
- ret ip
+ push {lr}
+ ldr lr, [sp, #4]
+ ldr pc, [sp], #8
#else
__mcount
#endif
--
Gitblit v1.6.2