From 244b2c5ca8b14627e4a17755e5922221e121c771 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 09 Oct 2024 06:15:07 +0000
Subject: [PATCH] change system file
---
kernel/include/net/mac80211.h | 891 ++++++++++++++++++++++++++++++++++++++++++++++++++++------
1 files changed, 794 insertions(+), 97 deletions(-)
diff --git a/kernel/include/net/mac80211.h b/kernel/include/net/mac80211.h
index dc967dd..02cd47e 100644
--- a/kernel/include/net/mac80211.h
+++ b/kernel/include/net/mac80211.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* mac80211 <-> driver interface
*
@@ -6,11 +7,7 @@
* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2015 - 2017 Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2018 - 2020 Intel Corporation
*/
#ifndef MAC80211_H
@@ -21,6 +18,7 @@
#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/ieee80211.h>
+#include <linux/android_kabi.h>
#include <net/cfg80211.h>
#include <net/codel.h>
#include <net/ieee80211_radiotap.h>
@@ -101,15 +99,22 @@
* Drivers indicate that they use this model by implementing the .wake_tx_queue
* driver operation.
*
- * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with a
- * single per-vif queue for multicast data frames.
+ * Intermediate queues (struct ieee80211_txq) are kept per-sta per-tid, with
+ * another per-sta for non-data/non-mgmt and bufferable management frames, and
+ * a single per-vif queue for multicast data frames.
*
* The driver is expected to initialize its private per-queue data for stations
* and interfaces in the .add_interface and .sta_add ops.
*
- * The driver can't access the queue directly. To dequeue a frame, it calls
- * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it
- * calls the .wake_tx_queue driver op.
+ * The driver can't access the queue directly. To dequeue a frame from a
+ * txq, it calls ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a
+ * queue, it calls the .wake_tx_queue driver op.
+ *
+ * Drivers can optionally delegate responsibility for scheduling queues to
+ * mac80211, to take advantage of airtime fairness accounting. In this case, to
+ * obtain the next queue to pull frames from, the driver calls
+ * ieee80211_next_txq(). The driver is then expected to return the txq using
+ * ieee80211_return_txq().
*
* For AP powersave TIM handling, the driver only needs to indicate if it has
* buffered packets in the driver specific data structures by calling
@@ -226,7 +231,7 @@
bool radar_enabled;
- u8 drv_priv[0] __aligned(sizeof(void *));
+ u8 drv_priv[] __aligned(sizeof(void *));
};
/**
@@ -308,6 +313,14 @@
* @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
* keep alive) changed.
* @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
+ * @BSS_CHANGED_FTM_RESPONDER: fine timing measurement request responder
+ * functionality changed for this BSS (AP mode).
+ * @BSS_CHANGED_TWT: TWT status changed
+ * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
+ * @BSS_CHANGED_HE_BSS_COLOR: BSS Color has changed
+ * @BSS_CHANGED_FILS_DISCOVERY: FILS discovery status changed.
+ * @BSS_CHANGED_UNSOL_BCAST_PROBE_RESP: Unsolicited broadcast probe response
+ * status changed.
*
*/
enum ieee80211_bss_change {
@@ -337,6 +350,12 @@
BSS_CHANGED_MU_GROUPS = 1<<23,
BSS_CHANGED_KEEP_ALIVE = 1<<24,
BSS_CHANGED_MCAST_RATE = 1<<25,
+ BSS_CHANGED_FTM_RESPONDER = 1<<26,
+ BSS_CHANGED_TWT = 1<<27,
+ BSS_CHANGED_HE_OBSS_PD = 1<<28,
+ BSS_CHANGED_HE_BSS_COLOR = 1<<29,
+ BSS_CHANGED_FILS_DISCOVERY = 1<<30,
+ BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = 1<<31,
/* when adding here, make sure to change ieee80211_reconfig */
};
@@ -463,12 +482,38 @@
};
/**
+ * struct ieee80211_ftm_responder_params - FTM responder parameters
+ *
+ * @lci: LCI subelement content
+ * @civicloc: CIVIC location subelement content
+ * @lci_len: LCI data length
+ * @civicloc_len: Civic data length
+ */
+struct ieee80211_ftm_responder_params {
+ const u8 *lci;
+ const u8 *civicloc;
+ size_t lci_len;
+ size_t civicloc_len;
+};
+
+/**
+ * struct ieee80211_fils_discovery - FILS discovery parameters from
+ * IEEE Std 802.11ai-2016, Annex C.3 MIB detail.
+ *
+ * @min_interval: Minimum packet interval in TUs (0 - 10000)
+ * @max_interval: Maximum packet interval in TUs (0 - 10000)
+ */
+struct ieee80211_fils_discovery {
+ u32 min_interval;
+ u32 max_interval;
+};
+
+/**
* struct ieee80211_bss_conf - holds the BSS's changing parameters
*
* This structure keeps information about a BSS (and an association
* to that BSS) that can change during the lifetime of the BSS.
*
- * @bss_color: 6-bit value to mark inter-BSS frame, if BSS supports HE
* @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE
* @multi_sta_back_32bit: supports BA bitmap of 32-bits in Multi-STA BACK
* @uora_exists: is the UORA element advertised by AP
@@ -477,6 +522,11 @@
* @uora_ocw_range: UORA element's OCW Range field
* @frame_time_rts_th: HE duration RTS threshold, in units of 32us
* @he_support: does this BSS support HE
+ * @twt_requester: does this BSS support TWT requester (relevant for managed
+ * mode only, set if the AP advertises TWT responder role)
+ * @twt_responder: does this BSS support TWT requester (relevant for managed
+ * mode only, set if the AP advertises TWT responder role)
+ * @twt_protected: does this BSS support protected TWT frames
* @assoc: association status
* @ibss_joined: indicates whether this station is part of an IBSS
* or not
@@ -543,7 +593,7 @@
* @ssid: The SSID of the current vif. Valid in AP and IBSS mode.
* @ssid_len: Length of SSID given in @ssid.
* @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
- * @txpower: TX power in dBm
+ * @txpower: TX power in dBm. INT_MIN means not configured.
* @txpower_type: TX power adjustment used to control per packet Transmit
* Power Control (TPC) in lower driver for the current vif. In particular
* TPC is enabled if value passed in %txpower_type is
@@ -561,10 +611,29 @@
* @protected_keep_alive: if set, indicates that the station should send an RSN
* protected frame to the AP to reset the idle timer at the AP for the
* station.
+ * @ftm_responder: whether to enable or disable fine timing measurement FTM
+ * responder functionality.
+ * @ftmr_params: configurable lci/civic parameter when enabling FTM responder.
+ * @nontransmitted: this BSS is a nontransmitted BSS profile
+ * @transmitter_bssid: the address of transmitter AP
+ * @bssid_index: index inside the multiple BSSID set
+ * @bssid_indicator: 2^bssid_indicator is the maximum number of APs in set
+ * @ema_ap: AP supports enhancements of discovery and advertisement of
+ * nontransmitted BSSIDs
+ * @profile_periodicity: the least number of beacon frames need to be received
+ * in order to discover all the nontransmitted BSSIDs in the set.
+ * @he_oper: HE operation information of the AP we are connected to
+ * @he_obss_pd: OBSS Packet Detection parameters.
+ * @he_bss_color: BSS coloring settings, if BSS supports HE
+ * @fils_discovery: FILS discovery configuration
+ * @unsol_bcast_probe_resp_interval: Unsolicited broadcast probe response
+ * interval.
+ * @s1g: BSS is S1G BSS (affects Association Request format).
+ * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed
+ * to driver when rate control is offloaded to firmware.
*/
struct ieee80211_bss_conf {
const u8 *bssid;
- u8 bss_color;
u8 htc_trig_based_pkt_ext;
bool multi_sta_back_32bit;
bool uora_exists;
@@ -572,6 +641,9 @@
u8 uora_ocw_range;
u16 frame_time_rts_th;
bool he_support;
+ bool twt_requester;
+ bool twt_responder;
+ bool twt_protected;
/* association related data */
bool assoc, ibss_joined;
bool ibss_creator;
@@ -611,6 +683,27 @@
bool allow_p2p_go_ps;
u16 max_idle_period;
bool protected_keep_alive;
+ bool ftm_responder;
+ struct ieee80211_ftm_responder_params *ftmr_params;
+ /* Multiple BSSID data */
+ bool nontransmitted;
+ u8 transmitter_bssid[ETH_ALEN];
+ u8 bssid_index;
+ u8 bssid_indicator;
+ bool ema_ap;
+ u8 profile_periodicity;
+ struct {
+ u32 params;
+ u16 nss_set;
+ } he_oper;
+ struct ieee80211_he_obss_pd he_obss_pd;
+ struct cfg80211_he_bss_color he_bss_color;
+ struct ieee80211_fils_discovery fils_discovery;
+ u32 unsol_bcast_probe_resp_interval;
+ bool s1g;
+ struct cfg80211_bitrate_mask beacon_tx_rate;
+
+ ANDROID_KABI_RESERVE(1);
};
/**
@@ -657,9 +750,8 @@
* @IEEE80211_TX_INTFL_OFFCHAN_TX_OK: Internal to mac80211. Used to indicate
* that a frame can be transmitted while the queues are stopped for
* off-channel operation.
- * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211,
- * used to indicate that a pending frame requires TX processing before
- * it can be sent out.
+ * @IEEE80211_TX_CTL_HW_80211_ENCAP: This frame uses hardware encapsulation
+ * (header conversion)
* @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211,
* used to indicate that a frame was already retried due to PS
* @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211,
@@ -728,7 +820,7 @@
IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11),
IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12),
IEEE80211_TX_INTFL_OFFCHAN_TX_OK = BIT(13),
- IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14),
+ IEEE80211_TX_CTL_HW_80211_ENCAP = BIT(14),
IEEE80211_TX_INTFL_RETRIED = BIT(15),
IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16),
IEEE80211_TX_CTL_NO_PS_BUFFER = BIT(17),
@@ -749,6 +841,8 @@
#define IEEE80211_TX_CTL_STBC_SHIFT 23
+#define IEEE80211_TX_RC_S1G_MCS IEEE80211_TX_RC_VHT_MCS
+
/**
* enum mac80211_tx_control_flags - flags to describe transmit control
*
@@ -759,6 +853,12 @@
* @IEEE80211_TX_CTRL_RATE_INJECT: This frame is injected with rate information
* @IEEE80211_TX_CTRL_AMSDU: This frame is an A-MSDU frame
* @IEEE80211_TX_CTRL_FAST_XMIT: This frame is going through the fast_xmit path
+ * @IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP: This frame skips mesh path lookup
+ * @IEEE80211_TX_INTCFL_NEED_TXPROCESSING: completely internal to mac80211,
+ * used to indicate that a pending frame requires TX processing before
+ * it can be sent out.
+ * @IEEE80211_TX_CTRL_NO_SEQNO: Do not overwrite the sequence number that
+ * has already been assigned to this frame.
*
* These flags are used in tx_info->control.flags.
*/
@@ -768,6 +868,9 @@
IEEE80211_TX_CTRL_RATE_INJECT = BIT(2),
IEEE80211_TX_CTRL_AMSDU = BIT(3),
IEEE80211_TX_CTRL_FAST_XMIT = BIT(4),
+ IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP = BIT(5),
+ IEEE80211_TX_INTCFL_NEED_TXPROCESSING = BIT(6),
+ IEEE80211_TX_CTRL_NO_SEQNO = BIT(7),
};
/*
@@ -909,8 +1012,34 @@
* @band: the band to transmit on (use for checking for races)
* @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC
* @ack_frame_id: internal frame ID for TX status, used internally
- * @control: union for control data
- * @status: union for status data
+ * @tx_time_est: TX time estimate in units of 4us, used internally
+ * @control: union part for control data
+ * @control.rates: TX rates array to try
+ * @control.rts_cts_rate_idx: rate for RTS or CTS
+ * @control.use_rts: use RTS
+ * @control.use_cts_prot: use RTS/CTS
+ * @control.short_preamble: use short preamble (CCK only)
+ * @control.skip_table: skip externally configured rate table
+ * @control.jiffies: timestamp for expiry on powersave clients
+ * @control.vif: virtual interface (may be NULL)
+ * @control.hw_key: key to encrypt with (may be NULL)
+ * @control.flags: control flags, see &enum mac80211_tx_control_flags
+ * @control.enqueue_time: enqueue time (for iTXQs)
+ * @driver_rates: alias to @control.rates to reserve space
+ * @pad: padding
+ * @rate_driver_data: driver use area if driver needs @control.rates
+ * @status: union part for status data
+ * @status.rates: attempted rates
+ * @status.ack_signal: ACK signal
+ * @status.ampdu_ack_len: AMPDU ack length
+ * @status.ampdu_len: AMPDU length
+ * @status.antenna: (legacy, kept only for iwlegacy)
+ * @status.tx_time: airtime consumed for transmission; note this is only
+ * used for WMM AC, not for airtime fairness
+ * @status.is_valid_ack_signal: ACK signal is valid
+ * @status.status_driver_data: driver use area
+ * @ack: union part for pure ACK data
+ * @ack.cookie: cookie for the ACK
* @driver_data: array of driver_data pointers
* @ampdu_ack_len: number of acked aggregated frames.
* relevant only if IEEE80211_TX_STAT_AMPDU was set.
@@ -921,11 +1050,11 @@
struct ieee80211_tx_info {
/* common information */
u32 flags;
- u8 band;
-
- u8 hw_queue;
-
- u16 ack_frame_id;
+ u32 band:3,
+ ack_frame_id:13,
+ hw_queue:4,
+ tx_time_est:10;
+ /* 2 free bits */
union {
struct {
@@ -971,22 +1100,45 @@
void *rate_driver_data[
IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE / sizeof(void *)];
};
+
+ ANDROID_KABI_RESERVE(1);
+
void *driver_data[
IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)];
};
};
+static inline u16
+ieee80211_info_set_tx_time_est(struct ieee80211_tx_info *info, u16 tx_time_est)
+{
+ /* We only have 10 bits in tx_time_est, so store airtime
+ * in increments of 4us and clamp the maximum to 2**12-1
+ */
+ info->tx_time_est = min_t(u16, tx_time_est, 4095) >> 2;
+ return info->tx_time_est << 2;
+}
+
+static inline u16
+ieee80211_info_get_tx_time_est(struct ieee80211_tx_info *info)
+{
+ return info->tx_time_est << 2;
+}
+
/**
- * struct ieee80211_tx_status - extended tx staus info for rate control
+ * struct ieee80211_tx_status - extended tx status info for rate control
*
* @sta: Station that the packet was transmitted for
* @info: Basic tx status information
* @skb: Packet skb (can be NULL if not provided by the driver)
+ * @rate: The TX rate that was used when sending the packet
+ * @free_list: list where processed skbs are stored to be free'd by the driver
*/
struct ieee80211_tx_status {
struct ieee80211_sta *sta;
struct ieee80211_tx_info *info;
struct sk_buff *skb;
+ struct rate_info *rate;
+ struct list_head *free_list;
};
/**
@@ -1130,6 +1282,7 @@
* @RX_FLAG_AMPDU_EOF_BIT_KNOWN: The EOF value is known
* @RX_FLAG_RADIOTAP_HE: HE radiotap data is present
* (&struct ieee80211_radiotap_he, mac80211 will fill in
+ *
* - DATA3_DATA_MCS
* - DATA3_DATA_DCM
* - DATA3_CODING
@@ -1137,9 +1290,15 @@
* - DATA5_DATA_BW_RU_ALLOC
* - DATA6_NSTS
* - DATA3_STBC
+ *
* from the RX info data, so leave those zeroed when building this data)
* @RX_FLAG_RADIOTAP_HE_MU: HE MU radiotap data is present
* (&struct ieee80211_radiotap_he_mu)
+ * @RX_FLAG_RADIOTAP_LSIG: L-SIG radiotap data is present
+ * @RX_FLAG_NO_PSDU: use the frame only for radiotap reporting, with
+ * the "0-length PSDU" field included there. The value for it is
+ * in &struct ieee80211_rx_status. Note that if this value isn't
+ * known the frame shouldn't be reported.
*/
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = BIT(0),
@@ -1170,6 +1329,8 @@
RX_FLAG_AMPDU_EOF_BIT_KNOWN = BIT(25),
RX_FLAG_RADIOTAP_HE = BIT(26),
RX_FLAG_RADIOTAP_HE_MU = BIT(27),
+ RX_FLAG_RADIOTAP_LSIG = BIT(28),
+ RX_FLAG_NO_PSDU = BIT(29),
};
/**
@@ -1180,7 +1341,7 @@
* @RX_ENC_FLAG_HT_GF: This frame was received in a HT-greenfield transmission,
* if the driver fills this value it should add
* %IEEE80211_RADIOTAP_MCS_HAVE_FMT
- * to hw.radiotap_mcs_details to advertise that fact
+ * to @hw.radiotap_mcs_details to advertise that fact.
* @RX_ENC_FLAG_LDPC: LDPC was used
* @RX_ENC_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
* @RX_ENC_FLAG_BF: packet was beamformed
@@ -1220,6 +1381,7 @@
* @freq: frequency the radio was tuned to when receiving this frame, in MHz
* This field must be set for management frames, but isn't strictly needed
* for data (other) frames - for those it only affects radiotap reporting.
+ * @freq_offset: @freq has a positive offset of 500Khz.
* @signal: signal strength when receiving this frame, either in dBm, in dB or
* unspecified depending on the hardware capabilities flags
* @IEEE80211_HW_SIGNAL_*
@@ -1242,6 +1404,7 @@
* @ampdu_reference: A-MPDU reference number, must be a different value for
* each A-MPDU but the same for each subframe within one A-MPDU
* @ampdu_delimiter_crc: A-MPDU delimiter CRC
+ * @zero_length_psdu_type: radiotap type of the 0-length PSDU
*/
struct ieee80211_rx_status {
u64 mactime;
@@ -1249,7 +1412,7 @@
u32 device_timestamp;
u32 ampdu_reference;
u32 flag;
- u16 freq;
+ u16 freq: 13, freq_offset: 1;
u8 enc_flags;
u8 encoding:2, bw:3, he_ru:3;
u8 he_gi:2, he_dcm:1;
@@ -1262,7 +1425,15 @@
u8 chains;
s8 chain_signal[IEEE80211_MAX_CHAINS];
u8 ampdu_delimiter_crc;
+ u8 zero_length_psdu_type;
};
+
+static inline u32
+ieee80211_rx_status_to_khz(struct ieee80211_rx_status *rx_status)
+{
+ return MHZ_TO_KHZ(rx_status->freq) +
+ (rx_status->freq_offset ? 500 : 0);
+}
/**
* struct ieee80211_vendor_radiotap - vendor radiotap data information
@@ -1418,6 +1589,8 @@
struct cfg80211_chan_def chandef;
bool radar_enabled;
enum ieee80211_smps_mode smps_mode;
+
+ ANDROID_KABI_RESERVE(1);
};
/**
@@ -1436,6 +1609,9 @@
* scheduled channel switch, as indicated by the AP.
* @chandef: the new channel to switch to
* @count: the number of TBTT's until the channel switch event
+ * @delay: maximum delay between the time the AP transmitted the last beacon in
+ * current channel and the expected time of the first beacon in the new
+ * channel, expressed in TU.
*/
struct ieee80211_channel_switch {
u64 timestamp;
@@ -1443,6 +1619,7 @@
bool block_tx;
struct cfg80211_chan_def chandef;
u8 count;
+ u32 delay;
};
/**
@@ -1469,6 +1646,21 @@
IEEE80211_VIF_GET_NOA_UPDATE = BIT(3),
};
+
+/**
+ * enum ieee80211_offload_flags - virtual interface offload flags
+ *
+ * @IEEE80211_OFFLOAD_ENCAP_ENABLED: tx encapsulation offload is enabled
+ * The driver supports sending frames passed as 802.3 frames by mac80211.
+ * It must also support sending 802.11 packets for the same interface.
+ * @IEEE80211_OFFLOAD_ENCAP_4ADDR: support 4-address mode encapsulation offload
+ */
+
+enum ieee80211_offload_flags {
+ IEEE80211_OFFLOAD_ENCAP_ENABLED = BIT(0),
+ IEEE80211_OFFLOAD_ENCAP_4ADDR = BIT(1),
+};
+
/**
* struct ieee80211_vif - per-interface data
*
@@ -1489,6 +1681,11 @@
* these need to be set (or cleared) when the interface is added
* or, if supported by the driver, the interface type is changed
* at runtime, mac80211 will never touch this field
+ * @offloaad_flags: hardware offload capabilities/flags for this interface.
+ * These are initialized by mac80211 before calling .add_interface,
+ * .change_interface or .update_vif_offload and updated by the driver
+ * within these ops, based on supported features or runtime change
+ * restrictions.
* @hw_queue: hardware queue for each AC
* @cab_queue: content-after-beacon (DTIM beacon really) queue, AP mode only
* @chanctx_conf: The channel context this interface is assigned to, or %NULL
@@ -1501,9 +1698,15 @@
* monitor interface (if that is requested.)
* @probe_req_reg: probe requests should be reported to mac80211 for this
* interface.
+ * @rx_mcast_action_reg: multicast Action frames should be reported to mac80211
+ * for this interface.
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void \*).
* @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
+ * @txqs_stopped: per AC flag to indicate that intermediate TXQs are stopped,
+ * protected by fq->lock.
+ * @offload_flags: 802.3 -> 802.11 enapsulation offload flags, see
+ * &enum ieee80211_offload_flags.
*/
struct ieee80211_vif {
enum nl80211_iftype type;
@@ -1521,15 +1724,21 @@
struct ieee80211_chanctx_conf __rcu *chanctx_conf;
u32 driver_flags;
+ u32 offload_flags;
#ifdef CONFIG_MAC80211_DEBUGFS
struct dentry *debugfs_dir;
#endif
- unsigned int probe_req_reg;
+ bool probe_req_reg;
+ bool rx_mcast_action_reg;
+
+ bool txqs_stopped[IEEE80211_NUM_ACS];
+
+ ANDROID_KABI_RESERVE(1);
/* must be last */
- u8 drv_priv[0] __aligned(sizeof(void *));
+ u8 drv_priv[] __aligned(sizeof(void *));
};
static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
@@ -1599,13 +1808,17 @@
* %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
* @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
* driver for a CCMP/GCMP key to indicate that is requires IV generation
- * only for managment frames (MFP).
+ * only for management frames (MFP).
* @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
* driver for a key to indicate that sufficient tailroom must always
* be reserved for ICV or MIC, even when HW encryption is enabled.
* @IEEE80211_KEY_FLAG_PUT_MIC_SPACE: This flag should be set by the driver for
* a TKIP key if it only requires MIC space. Do not set together with
* @IEEE80211_KEY_FLAG_GENERATE_MMIC on the same key.
+ * @IEEE80211_KEY_FLAG_NO_AUTO_TX: Key needs explicit Tx activation.
+ * @IEEE80211_KEY_FLAG_GENERATE_MMIE: This flag should be set by the driver
+ * for a AES_CMAC key to indicate that it requires sequence number
+ * generation only
*/
enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0),
@@ -1617,6 +1830,8 @@
IEEE80211_KEY_FLAG_RX_MGMT = BIT(6),
IEEE80211_KEY_FLAG_RESERVE_TAILROOM = BIT(7),
IEEE80211_KEY_FLAG_PUT_MIC_SPACE = BIT(8),
+ IEEE80211_KEY_FLAG_NO_AUTO_TX = BIT(9),
+ IEEE80211_KEY_FLAG_GENERATE_MMIE = BIT(10),
};
/**
@@ -1651,7 +1866,7 @@
s8 keyidx;
u16 flags;
u8 keylen;
- u8 key[0];
+ u8 key[];
};
#define IEEE80211_MAX_PN_LEN 16
@@ -1797,6 +2012,24 @@
};
/**
+ * struct ieee80211_sta_txpwr - station txpower configuration
+ *
+ * Used to configure txpower for station.
+ *
+ * @power: indicates the tx power, in dBm, to be used when sending data frames
+ * to the STA.
+ * @type: In particular if TPC %type is NL80211_TX_POWER_LIMITED then tx power
+ * will be less than or equal to specified from userspace, whereas if TPC
+ * %type is NL80211_TX_POWER_AUTOMATIC then it indicates default tx power.
+ * NL80211_TX_POWER_FIXED is not a valid configuration option for
+ * per peer TPC.
+ */
+struct ieee80211_sta_txpwr {
+ s16 power;
+ enum nl80211_tx_power_setting type;
+};
+
+/**
* struct ieee80211_sta - station table entry
*
* A station table entry represents a station we are possibly
@@ -1812,6 +2045,7 @@
* @ht_cap: HT capabilities of this STA; restricted to our own capabilities
* @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
* @he_cap: HE capabilities of this STA
+ * @he_6ghz_capa: on 6 GHz, holds the HE 6 GHz band capabilities
* @max_rx_aggregation_subframes: maximal amount of frames in a single AMPDU
* that this station is allowed to transmit to us.
* Can be modified by driver.
@@ -1839,7 +2073,10 @@
* unlimited.
* @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not.
* @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control.
- * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
+ * @max_tid_amsdu_len: Maximum A-MSDU size in bytes for this TID
+ * @txpwr: the station tx power configuration
+ * @txq: per-TID data TX queues (if driver uses the TXQ abstraction); note that
+ * the last entry (%IEEE80211_NUM_TIDS) is used for non-data frames
*/
struct ieee80211_sta {
u32 supp_rates[NUM_NL80211_BANDS];
@@ -1848,6 +2085,7 @@
struct ieee80211_sta_ht_cap ht_cap;
struct ieee80211_sta_vht_cap vht_cap;
struct ieee80211_sta_he_cap he_cap;
+ struct ieee80211_he_6ghz_capa he_6ghz_capa;
u16 max_rx_aggregation_subframes;
bool wme;
u8 uapsd_queues;
@@ -1869,7 +2107,7 @@
*
* * If the skb is transmitted as part of a BA agreement, the
* A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
- * * If the skb is not part of a BA aggreement, the A-MSDU maximal
+ * * If the skb is not part of a BA agreement, the A-MSDU maximal
* size is min(max_amsdu_len, 7935) bytes.
*
* Both additional HT limits must be enforced by the low level
@@ -1879,11 +2117,15 @@
u16 max_amsdu_len;
bool support_p2p_ps;
u16 max_rc_amsdu_len;
+ u16 max_tid_amsdu_len[IEEE80211_NUM_TIDS];
+ struct ieee80211_sta_txpwr txpwr;
- struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
+ struct ieee80211_txq *txq[IEEE80211_NUM_TIDS + 1];
+
+ ANDROID_KABI_RESERVE(1);
/* must be last */
- u8 drv_priv[0] __aligned(sizeof(void *));
+ u8 drv_priv[] __aligned(sizeof(void *));
};
/**
@@ -1914,7 +2156,8 @@
*
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @sta: station table entry, %NULL for per-vif queue
- * @tid: the TID for this queue (unused for per-vif queue)
+ * @tid: the TID for this queue (unused for per-vif queue),
+ * %IEEE80211_NUM_TIDS for non-data (if enabled)
* @ac: the AC for this queue
* @drv_priv: driver private area, sized by hw->txq_data_size
*
@@ -1928,7 +2171,7 @@
u8 ac;
/* must be last */
- u8 drv_priv[0] __aligned(sizeof(void *));
+ u8 drv_priv[] __aligned(sizeof(void *));
};
/**
@@ -2127,6 +2370,34 @@
* @IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP: The driver (or firmware) doesn't
* support QoS NDP for AP probing - that's most likely a driver bug.
*
+ * @IEEE80211_HW_BUFF_MMPDU_TXQ: use the TXQ for bufferable MMPDUs, this of
+ * course requires the driver to use TXQs to start with.
+ *
+ * @IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW: (Hardware) rate control supports VHT
+ * extended NSS BW (dot11VHTExtendedNSSBWCapable). This flag will be set if
+ * the selected rate control algorithm sets %RATE_CTRL_CAPA_VHT_EXT_NSS_BW
+ * but if the rate control is built-in then it must be set by the driver.
+ * See also the documentation for that flag.
+ *
+ * @IEEE80211_HW_STA_MMPDU_TXQ: use the extra non-TID per-station TXQ for all
+ * MMPDUs on station interfaces. This of course requires the driver to use
+ * TXQs to start with.
+ *
+ * @IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN: Driver does not report accurate A-MPDU
+ * length in tx status information
+ *
+ * @IEEE80211_HW_SUPPORTS_MULTI_BSSID: Hardware supports multi BSSID
+ *
+ * @IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID: Hardware supports multi BSSID
+ * only for HE APs. Applies if @IEEE80211_HW_SUPPORTS_MULTI_BSSID is set.
+ *
+ * @IEEE80211_HW_AMPDU_KEYBORDER_SUPPORT: The card and driver is only
+ * aggregating MPDUs with the same keyid, allowing mac80211 to keep Tx
+ * A-MPDU sessions active while rekeying with Extended Key ID.
+ *
+ * @IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD: Hardware supports tx encapsulation
+ * offload
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
@@ -2172,6 +2443,14 @@
IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP,
IEEE80211_HW_DOESNT_SUPPORT_QOS_NDP,
+ IEEE80211_HW_BUFF_MMPDU_TXQ,
+ IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW,
+ IEEE80211_HW_STA_MMPDU_TXQ,
+ IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN,
+ IEEE80211_HW_SUPPORTS_MULTI_BSSID,
+ IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID,
+ IEEE80211_HW_AMPDU_KEYBORDER_SUPPORT,
+ IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
@@ -2263,12 +2542,14 @@
* @radiotap_he: HE radiotap validity flags
*
* @radiotap_timestamp: Information for the radiotap timestamp field; if the
- * 'units_pos' member is set to a non-negative value it must be set to
- * a combination of a IEEE80211_RADIOTAP_TIMESTAMP_UNIT_* and a
- * IEEE80211_RADIOTAP_TIMESTAMP_SPOS_* value, and then the timestamp
+ * @units_pos member is set to a non-negative value then the timestamp
* field will be added and populated from the &struct ieee80211_rx_status
- * device_timestamp. If the 'accuracy' member is non-negative, it's put
- * into the accuracy radiotap field and the accuracy known flag is set.
+ * device_timestamp.
+ * @radiotap_timestamp.units_pos: Must be set to a combination of a
+ * IEEE80211_RADIOTAP_TIMESTAMP_UNIT_* and a
+ * IEEE80211_RADIOTAP_TIMESTAMP_SPOS_* value.
+ * @radiotap_timestamp.accuracy: If non-negative, fills the accuracy in the
+ * radiotap field and the accuracy known flag will be set.
*
* @netdev_features: netdev features to be set in each netdev created
* from this HW. Note that not all features are usable with mac80211,
@@ -2290,6 +2571,15 @@
* supported by HW.
* @max_nan_de_entries: maximum number of NAN DE functions supported by the
* device.
+ *
+ * @tx_sk_pacing_shift: Pacing shift to set on TCP sockets when frames from
+ * them are encountered. The default should typically not be changed,
+ * unless the driver has good reasons for needing more buffers.
+ *
+ * @weight_multiplier: Driver specific airtime weight multiplier used while
+ * refilling deficit of each TXQ.
+ *
+ * @max_mtu: the max mtu could be set.
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
@@ -2325,6 +2615,11 @@
u8 n_cipher_schemes;
const struct ieee80211_cipher_scheme *cipher_schemes;
u8 max_nan_de_entries;
+ u8 tx_sk_pacing_shift;
+ u8 weight_multiplier;
+ u32 max_mtu;
+
+ ANDROID_KABI_RESERVE(1);
};
static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw,
@@ -2448,7 +2743,7 @@
* @hw: the hardware
* @skb: the skb
*
- * Free a transmit skb. Use this funtion when some failure
+ * Free a transmit skb. Use this function when some failure
* to transmit happened and thus status cannot be reported.
*/
void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -2506,6 +2801,19 @@
* The set_default_unicast_key() call updates the default WEP key index
* configured to the hardware for WEP encryption type. This is required
* for devices that support offload of data packets (e.g. ARP responses).
+ *
+ * Mac80211 drivers should set the @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 flag
+ * when they are able to replace in-use PTK keys according to the following
+ * requirements:
+ * 1) They do not hand over frames decrypted with the old key to
+ mac80211 once the call to set_key() with command %DISABLE_KEY has been
+ completed when also setting @IEEE80211_KEY_FLAG_GENERATE_IV for any key,
+ 2) either drop or continue to use the old key for any outgoing frames queued
+ at the time of the key deletion (including re-transmits),
+ 3) never send out a frame queued prior to the set_key() %SET_KEY command
+ encrypted with the new key and
+ 4) never send out a frame unencrypted when it should be encrypted.
+ Mac80211 will not queue any new frames for a deleted key to the driver.
*/
/**
@@ -2879,6 +3187,8 @@
* @FIF_PSPOLL: pass PS Poll frames
*
* @FIF_PROBE_REQ: pass probe request frames
+ *
+ * @FIF_MCAST_ACTION: pass multicast Action frames
*/
enum ieee80211_filter_flags {
FIF_ALLMULTI = 1<<1,
@@ -2889,6 +3199,7 @@
FIF_OTHER_BSS = 1<<6,
FIF_PSPOLL = 1<<7,
FIF_PROBE_REQ = 1<<8,
+ FIF_MCAST_ACTION = 1<<9,
};
/**
@@ -2904,7 +3215,12 @@
*
* @IEEE80211_AMPDU_RX_START: start RX aggregation
* @IEEE80211_AMPDU_RX_STOP: stop RX aggregation
- * @IEEE80211_AMPDU_TX_START: start TX aggregation
+ * @IEEE80211_AMPDU_TX_START: start TX aggregation, the driver must either
+ * call ieee80211_start_tx_ba_cb_irqsafe() or
+ * call ieee80211_start_tx_ba_cb_irqsafe() with status
+ * %IEEE80211_AMPDU_TX_START_DELAY_ADDBA to delay addba after
+ * ieee80211_start_tx_ba_cb_irqsafe is called, or just return the special
+ * status %IEEE80211_AMPDU_TX_START_IMMEDIATE.
* @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational
* @IEEE80211_AMPDU_TX_STOP_CONT: stop TX aggregation but continue transmitting
* queued packets, now unaggregated. After all packets are transmitted the
@@ -2927,6 +3243,9 @@
IEEE80211_AMPDU_TX_STOP_FLUSH_CONT,
IEEE80211_AMPDU_TX_OPERATIONAL,
};
+
+#define IEEE80211_AMPDU_TX_START_IMMEDIATE 1
+#define IEEE80211_AMPDU_TX_START_DELAY_ADDBA 2
/**
* struct ieee80211_ampdu_params - AMPDU action parameters
@@ -2992,13 +3311,13 @@
*
* With the support for multi channel contexts and multi channel operations,
* remain on channel operations might be limited/deferred/aborted by other
- * flows/operations which have higher priority (and vise versa).
+ * flows/operations which have higher priority (and vice versa).
* Specifying the ROC type can be used by devices to prioritize the ROC
* operations compared to other operations/flows.
*
* @IEEE80211_ROC_TYPE_NORMAL: There are no special requirements for this ROC.
* @IEEE80211_ROC_TYPE_MGMT_TX: The remain on channel request is required
- * for sending managment frames offchannel.
+ * for sending management frames offchannel.
*/
enum ieee80211_roc_type {
IEEE80211_ROC_TYPE_NORMAL = 0,
@@ -3006,7 +3325,7 @@
};
/**
- * enum ieee80211_reconfig_complete_type - reconfig type
+ * enum ieee80211_reconfig_type - reconfig type
*
* This enum is used by the reconfig_complete() callback to indicate what
* reconfiguration type was completed.
@@ -3164,6 +3483,11 @@
* When the scan finishes, ieee80211_scan_completed() must be called;
* note that it also must be called when the scan cannot finish due to
* any error unless this callback returned a negative error code.
+ * This callback is also allowed to return the special return value 1,
+ * this indicates that hardware scan isn't desirable right now and a
+ * software scan should be done instead. A driver wishing to use this
+ * capability must ensure its (hardware) scan capabilities aren't
+ * advertised as more capable than mac80211's software scan is.
* The callback can sleep.
*
* @cancel_hw_scan: Ask the low-level tp cancel the active hw scan.
@@ -3230,6 +3554,10 @@
* associated station, AP, IBSS/WDS/mesh peer etc. For a VIF operating
* in AP mode, this callback will not be called when the flag
* %IEEE80211_HW_AP_LINK_PS is set. Must be atomic.
+ *
+ * @sta_set_txpwr: Configure the station tx power. This callback set the tx
+ * power for the station.
+ * This callback can sleep.
*
* @sta_state: Notifies low level driver about state transition of a
* station (which can be the AP, a client, IBSS/WDS/mesh peer etc.)
@@ -3481,7 +3809,7 @@
* decremented, and when they reach 1 the driver must call
* ieee80211_csa_finish(). Drivers which use ieee80211_beacon_get()
* get the csa counter decremented by mac80211, but must check if it is
- * 1 using ieee80211_csa_is_complete() after the beacon has been
+ * 1 using ieee80211_beacon_counter_is_complete() after the beacon has been
* transmitted and then call ieee80211_csa_finish().
* If the CSA count starts as zero or 1, this function will not be called,
* since there won't be any time to beacon before the switch anyway.
@@ -3492,7 +3820,12 @@
* @post_channel_switch: This is an optional callback that is called
* after a channel switch procedure is completed, allowing the
* driver to go back to a normal configuration.
- *
+ * @abort_channel_switch: This is an optional callback that is called
+ * when channel switch procedure was completed, allowing the
+ * driver to go back to a normal configuration.
+ * @channel_switch_rx_beacon: This is an optional callback that is called
+ * when channel switch procedure is in progress and additional beacon with
+ * CSA IE was received, allowing driver to track changes in count.
* @join_ibss: Join an IBSS (on an IBSS interface); this is called after all
* information in bss_conf is set up and the beacon can be retrieved. A
* channel context is bound before this is called.
@@ -3542,6 +3875,22 @@
* @del_nan_func: Remove a NAN function. The driver must call
* ieee80211_nan_func_terminated() with
* NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST reason code upon removal.
+ * @can_aggregate_in_amsdu: Called in order to determine if HW supports
+ * aggregating two specific frames in the same A-MSDU. The relation
+ * between the skbs should be symmetric and transitive. Note that while
+ * skb is always a real frame, head may or may not be an A-MSDU.
+ * @get_ftm_responder_stats: Retrieve FTM responder statistics, if available.
+ * Statistics should be cumulative, currently no way to reset is provided.
+ *
+ * @start_pmsr: start peer measurement (e.g. FTM) (this call can sleep)
+ * @abort_pmsr: abort peer measurement (this call can sleep)
+ * @set_tid_config: Apply TID specific configurations. This callback may sleep.
+ * @reset_tid_config: Reset TID specific configuration for the peer.
+ * This callback may sleep.
+ * @update_vif_offload: Update virtual interface offload flags
+ * This callback may sleep.
+ * @sta_set_4addr: Called to notify the driver when a station starts/stops using
+ * 4-address mode
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
@@ -3629,6 +3978,9 @@
#endif
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, struct ieee80211_sta *sta);
+ int (*sta_set_txpwr)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta);
int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
enum ieee80211_sta_state old_state,
@@ -3683,7 +4035,10 @@
*
* Even ``189`` would be wrong since 1 could be lost again.
*
- * Returns a negative error code on failure.
+ * Returns a negative error code on failure. The driver may return
+ * %IEEE80211_AMPDU_TX_START_IMMEDIATE for %IEEE80211_AMPDU_TX_START
+ * if the session can start immediately.
+ *
* The callback can sleep.
*/
int (*ampdu_action)(struct ieee80211_hw *hw,
@@ -3693,11 +4048,13 @@
struct survey_info *survey);
void (*rfkill_poll)(struct ieee80211_hw *hw);
void (*set_coverage_class)(struct ieee80211_hw *hw, s16 coverage_class);
+#ifdef CONFIG_NL80211_TESTMODE
int (*testmode_cmd)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
void *data, int len);
int (*testmode_dump)(struct ieee80211_hw *hw, struct sk_buff *skb,
struct netlink_callback *cb,
void *data, int len);
+#endif
void (*flush)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
u32 queues, bool drop);
void (*channel_switch)(struct ieee80211_hw *hw,
@@ -3711,7 +4068,8 @@
struct ieee80211_channel *chan,
int duration,
enum ieee80211_roc_type type);
- int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
+ int (*cancel_remain_on_channel)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
void (*get_ringparam)(struct ieee80211_hw *hw,
u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
@@ -3784,6 +4142,11 @@
int (*post_channel_switch)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
+ void (*abort_channel_switch)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
+ void (*channel_switch_rx_beacon)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_channel_switch *ch_switch);
int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
@@ -3822,6 +4185,32 @@
void (*del_nan_func)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u8 instance_id);
+ bool (*can_aggregate_in_amsdu)(struct ieee80211_hw *hw,
+ struct sk_buff *head,
+ struct sk_buff *skb);
+ int (*get_ftm_responder_stats)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_ftm_responder_stats *ftm_stats);
+ int (*start_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct cfg80211_pmsr_request *request);
+ void (*abort_pmsr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct cfg80211_pmsr_request *request);
+ int (*set_tid_config)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct cfg80211_tid_config *tid_conf);
+ int (*reset_tid_config)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, u8 tids);
+ void (*update_vif_offload)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
+ void (*sta_set_4addr)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, bool enabled);
+
+ ANDROID_KABI_RESERVE(1);
+ ANDROID_KABI_RESERVE(2);
+ ANDROID_KABI_RESERVE(3);
+ ANDROID_KABI_RESERVE(4);
};
/**
@@ -4058,6 +4447,31 @@
void ieee80211_restart_hw(struct ieee80211_hw *hw);
/**
+ * ieee80211_rx_list - receive frame and store processed skbs in a list
+ *
+ * Use this function to hand received frames to mac80211. The receive
+ * buffer in @skb must start with an IEEE 802.11 header. In case of a
+ * paged @skb is used, the driver is recommended to put the ieee80211
+ * header of the frame on the linear part of the @skb to avoid memory
+ * allocation and/or memcpy by the stack.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other. Calls to
+ * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
+ * mixed for a single hardware. Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
+ *
+ * This function must be called with BHs disabled and RCU read lock
+ *
+ * @hw: the hardware this frame came in on
+ * @sta: the station the frame was received from, or %NULL
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ * @list: the destination list
+ */
+void ieee80211_rx_list(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+ struct sk_buff *skb, struct list_head *list);
+
+/**
* ieee80211_rx_napi - receive frame from NAPI context
*
* Use this function to hand received frames to mac80211. The receive
@@ -4291,6 +4705,21 @@
u32 thr);
/**
+ * ieee80211_tx_rate_update - transmit rate update callback
+ *
+ * Drivers should call this functions with a non-NULL pub sta
+ * This function can be used in drivers that does not have provision
+ * in updating the tx rate in data path.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @pubsta: the station to update the tx rate for.
+ * @info: tx status information
+ */
+void ieee80211_tx_rate_update(struct ieee80211_hw *hw,
+ struct ieee80211_sta *pubsta,
+ struct ieee80211_tx_info *info);
+
+/**
* ieee80211_tx_status - transmit status callback
*
* Call this function for all transmitted frames after they have been
@@ -4390,6 +4819,26 @@
struct sk_buff *skb);
/**
+ * ieee80211_tx_status_8023 - transmit status callback for 802.3 frame format
+ *
+ * Call this function for all transmitted data frames after their transmit
+ * completion. This callback should only be called for data frames which
+ * are using driver's (or hardware's) offload capability of encap/decap
+ * 802.11 frames.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other and all
+ * calls in the same tx status family.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @vif: the interface for which the frame was transmitted
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+void ieee80211_tx_status_8023(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct sk_buff *skb);
+
+/**
* ieee80211_report_low_ack - report non-responding station
*
* When operating in AP-mode, call this function to report a non-responding
@@ -4400,21 +4849,21 @@
*/
void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
-#define IEEE80211_MAX_CSA_COUNTERS_NUM 2
+#define IEEE80211_MAX_CNTDWN_COUNTERS_NUM 2
/**
* struct ieee80211_mutable_offsets - mutable beacon offsets
* @tim_offset: position of TIM element
* @tim_length: size of TIM element
- * @csa_counter_offs: array of IEEE80211_MAX_CSA_COUNTERS_NUM offsets
- * to CSA counters. This array can contain zero values which
+ * @cntdwn_counter_offs: array of IEEE80211_MAX_CNTDWN_COUNTERS_NUM offsets
+ * to countdown counters. This array can contain zero values which
* should be ignored.
*/
struct ieee80211_mutable_offsets {
u16 tim_offset;
u16 tim_length;
- u16 csa_counter_offs[IEEE80211_MAX_CSA_COUNTERS_NUM];
+ u16 cntdwn_counter_offs[IEEE80211_MAX_CNTDWN_COUNTERS_NUM];
};
/**
@@ -4483,31 +4932,31 @@
}
/**
- * ieee80211_csa_update_counter - request mac80211 to decrement the csa counter
+ * ieee80211_beacon_update_cntdwn - request mac80211 to decrement the beacon countdown
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
- * The csa counter should be updated after each beacon transmission.
+ * The beacon counter should be updated after each beacon transmission.
* This function is called implicitly when
* ieee80211_beacon_get/ieee80211_beacon_get_tim are called, however if the
* beacon frames are generated by the device, the driver should call this
- * function after each beacon transmission to sync mac80211's csa counters.
+ * function after each beacon transmission to sync mac80211's beacon countdown.
*
- * Return: new csa counter value
+ * Return: new countdown value
*/
-u8 ieee80211_csa_update_counter(struct ieee80211_vif *vif);
+u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif);
/**
- * ieee80211_csa_set_counter - request mac80211 to set csa counter
+ * ieee80211_beacon_set_cntdwn - request mac80211 to set beacon countdown
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @counter: the new value for the counter
*
- * The csa counter can be changed by the device, this API should be
+ * The beacon countdown can be changed by the device, this API should be
* used by the device driver to update csa counter in mac80211.
*
- * It should never be used together with ieee80211_csa_update_counter(),
+ * It should never be used together with ieee80211_beacon_update_cntdwn(),
* as it will cause a race condition around the counter value.
*/
-void ieee80211_csa_set_counter(struct ieee80211_vif *vif, u8 counter);
+void ieee80211_beacon_set_cntdwn(struct ieee80211_vif *vif, u8 counter);
/**
* ieee80211_csa_finish - notify mac80211 about channel switch
@@ -4520,13 +4969,12 @@
void ieee80211_csa_finish(struct ieee80211_vif *vif);
/**
- * ieee80211_csa_is_complete - find out if counters reached 1
+ * ieee80211_beacon_cntdwn_is_complete - find out if countdown reached 1
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
*
- * This function returns whether the channel switch counters reached zero.
+ * This function returns whether the countdown reached zero.
*/
-bool ieee80211_csa_is_complete(struct ieee80211_vif *vif);
-
+bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif);
/**
* ieee80211_proberesp_get - retrieve a Probe Response template
@@ -4981,11 +5429,15 @@
* @IEEE80211_IFACE_ITER_RESUME_ALL: During resume, iterate over all
* interfaces, even if they haven't been re-added to the driver yet.
* @IEEE80211_IFACE_ITER_ACTIVE: Iterate only active interfaces (netdev is up).
+ * @IEEE80211_IFACE_SKIP_SDATA_NOT_IN_DRIVER: Skip any interfaces where SDATA
+ * is not in the driver. This may fix crashes during firmware recovery
+ * for instance.
*/
enum ieee80211_interface_iteration_flags {
IEEE80211_IFACE_ITER_NORMAL = 0,
IEEE80211_IFACE_ITER_RESUME_ALL = BIT(0),
IEEE80211_IFACE_ITER_ACTIVE = BIT(1),
+ IEEE80211_IFACE_SKIP_SDATA_NOT_IN_DRIVER = BIT(2),
};
/**
@@ -5283,6 +5735,46 @@
void ieee80211_send_eosp_nullfunc(struct ieee80211_sta *pubsta, int tid);
/**
+ * ieee80211_sta_register_airtime - register airtime usage for a sta/tid
+ *
+ * Register airtime usage for a given sta on a given tid. The driver must call
+ * this function to notify mac80211 that a station used a certain amount of
+ * airtime. This information will be used by the TXQ scheduler to schedule
+ * stations in a way that ensures airtime fairness.
+ *
+ * The reported airtime should as a minimum include all time that is spent
+ * transmitting to the remote station, including overhead and padding, but not
+ * including time spent waiting for a TXOP. If the time is not reported by the
+ * hardware it can in some cases be calculated from the rate and known frame
+ * composition. When possible, the time should include any failed transmission
+ * attempts.
+ *
+ * The driver can either call this function synchronously for every packet or
+ * aggregate, or asynchronously as airtime usage information becomes available.
+ * TX and RX airtime can be reported together, or separately by setting one of
+ * them to 0.
+ *
+ * @pubsta: the station
+ * @tid: the TID to register airtime for
+ * @tx_airtime: airtime used during TX (in usec)
+ * @rx_airtime: airtime used during RX (in usec)
+ */
+void ieee80211_sta_register_airtime(struct ieee80211_sta *pubsta, u8 tid,
+ u32 tx_airtime, u32 rx_airtime);
+
+/**
+ * ieee80211_txq_airtime_check - check if a txq can send frame to device
+ *
+ * @hw: pointer obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface
+ *
+ * Return true if the AQL's airtime limit has not been reached and the txq can
+ * continue to send more packets to the device. Otherwise return false.
+ */
+bool
+ieee80211_txq_airtime_check(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
+
+/**
* ieee80211_iter_keys - iterate keys programmed into the device
* @hw: pointer obtained from ieee80211_alloc_hw()
* @vif: virtual interface to iterate, may be %NULL for all
@@ -5335,7 +5827,7 @@
/**
* ieee80211_iter_chan_contexts_atomic - iterate channel contexts
- * @hw: pointre obtained from ieee80211_alloc_hw().
+ * @hw: pointer obtained from ieee80211_alloc_hw().
* @iter: iterator function
* @iter_data: data passed to iterator function
*
@@ -5642,9 +6134,26 @@
bool bss;
};
+/**
+ * enum rate_control_capabilities - rate control capabilities
+ */
+enum rate_control_capabilities {
+ /**
+ * @RATE_CTRL_CAPA_VHT_EXT_NSS_BW:
+ * Support for extended NSS BW support (dot11VHTExtendedNSSCapable)
+ * Note that this is only looked at if the minimum number of chains
+ * that the AP uses is < the number of TX chains the hardware has,
+ * otherwise the NSS difference doesn't bother us.
+ */
+ RATE_CTRL_CAPA_VHT_EXT_NSS_BW = BIT(0),
+};
+
struct rate_control_ops {
+ unsigned long capa;
const char *name;
- void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
+ void *(*alloc)(struct ieee80211_hw *hw);
+ void (*add_debugfs)(struct ieee80211_hw *hw, void *priv,
+ struct dentry *debugfsdir);
void (*free)(void *priv);
void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
@@ -5669,9 +6178,13 @@
void (*add_sta_debugfs)(void *priv, void *priv_sta,
struct dentry *dir);
- void (*remove_sta_debugfs)(void *priv, void *priv_sta);
u32 (*get_expected_throughput)(void *priv_sta);
+
+ ANDROID_KABI_RESERVE(1);
+ ANDROID_KABI_RESERVE(2);
+ ANDROID_KABI_RESERVE(3);
+ ANDROID_KABI_RESERVE(4);
};
static inline int rate_supported(struct ieee80211_sta *sta,
@@ -5680,29 +6193,6 @@
{
return (sta == NULL || sta->supp_rates[band] & BIT(index));
}
-
-/**
- * rate_control_send_low - helper for drivers for management/no-ack frames
- *
- * Rate control algorithms that agree to use the lowest rate to
- * send management frames and NO_ACK data with the respective hw
- * retries should use this in the beginning of their mac80211 get_rate
- * callback. If true is returned the rate control can simply return.
- * If false is returned we guarantee that sta and sta and priv_sta is
- * not null.
- *
- * Rate control algorithms wishing to do more intelligent selection of
- * rate for multicast/broadcast frames may choose to not use this.
- *
- * @sta: &struct ieee80211_sta pointer to the target destination. Note
- * that this may be null.
- * @priv_sta: private rate control structure. This may be null.
- * @txrc: rate control information we sholud populate for mac80211.
- */
-bool rate_control_send_low(struct ieee80211_sta *sta,
- void *priv_sta,
- struct ieee80211_tx_rate_control *txrc);
-
static inline s8
rate_lowest_index(struct ieee80211_supported_band *sband,
@@ -5868,6 +6358,20 @@
int band, struct ieee80211_sta **sta);
/**
+ * ieee80211_parse_tx_radiotap - Sanity-check and parse the radiotap header
+ * of injected frames.
+ *
+ * To accurately parse and take into account rate and retransmission fields,
+ * you must initialize the chandef field in the ieee80211_tx_info structure
+ * of the skb before calling this function.
+ *
+ * @skb: packet injected by userspace
+ * @dev: the &struct device of this 802.11 device
+ */
+bool ieee80211_parse_tx_radiotap(struct sk_buff *skb,
+ struct net_device *dev);
+
+/**
* struct ieee80211_noa_data - holds temporary data for tracking P2P NoA state
*
* @next_tsf: TSF timestamp of the next absent state change
@@ -5915,7 +6419,7 @@
void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf);
/**
- * ieee80211_tdls_oper - request userspace to perform a TDLS operation
+ * ieee80211_tdls_oper_request - request userspace to perform a TDLS operation
* @vif: virtual interface
* @peer: the peer's destination address
* @oper: the requested TDLS operation
@@ -5969,12 +6473,140 @@
* ieee80211_tx_dequeue - dequeue a packet from a software tx queue
*
* @hw: pointer as obtained from ieee80211_alloc_hw()
- * @txq: pointer obtained from station or virtual interface
+ * @txq: pointer obtained from station or virtual interface, or from
+ * ieee80211_next_txq()
*
* Returns the skb if successful, %NULL if no frame was available.
+ *
+ * Note that this must be called in an rcu_read_lock() critical section,
+ * which can only be released after the SKB was handled. Some pointers in
+ * skb->cb, e.g. the key pointer, are protected by RCU and thus the
+ * critical section must persist not just for the duration of this call
+ * but for the duration of the frame handling.
+ * However, also note that while in the wake_tx_queue() method,
+ * rcu_read_lock() is already held.
+ *
+ * softirqs must also be disabled when this function is called.
+ * In process context, use ieee80211_tx_dequeue_ni() instead.
*/
struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
struct ieee80211_txq *txq);
+
+/**
+ * ieee80211_tx_dequeue_ni - dequeue a packet from a software tx queue
+ * (in process context)
+ *
+ * Like ieee80211_tx_dequeue() but can be called in process context
+ * (internally disables bottom halves).
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface, or from
+ * ieee80211_next_txq()
+ */
+static inline struct sk_buff *ieee80211_tx_dequeue_ni(struct ieee80211_hw *hw,
+ struct ieee80211_txq *txq)
+{
+ struct sk_buff *skb;
+
+ local_bh_disable();
+ skb = ieee80211_tx_dequeue(hw, txq);
+ local_bh_enable();
+
+ return skb;
+}
+
+/**
+ * ieee80211_next_txq - get next tx queue to pull packets from
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @ac: AC number to return packets from.
+ *
+ * Returns the next txq if successful, %NULL if no queue is eligible. If a txq
+ * is returned, it should be returned with ieee80211_return_txq() after the
+ * driver has finished scheduling it.
+ */
+struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac);
+
+/**
+ * ieee80211_txq_schedule_start - start new scheduling round for TXQs
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @ac: AC number to acquire locks for
+ *
+ * Should be called before ieee80211_next_txq() or ieee80211_return_txq().
+ * The driver must not call multiple TXQ scheduling rounds concurrently.
+ */
+void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac);
+
+/* (deprecated) */
+static inline void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
+{
+}
+
+void __ieee80211_schedule_txq(struct ieee80211_hw *hw,
+ struct ieee80211_txq *txq, bool force);
+
+/**
+ * ieee80211_schedule_txq - schedule a TXQ for transmission
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface
+ *
+ * Schedules a TXQ for transmission if it is not already scheduled,
+ * even if mac80211 does not have any packets buffered.
+ *
+ * The driver may call this function if it has buffered packets for
+ * this TXQ internally.
+ */
+static inline void
+ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
+{
+ __ieee80211_schedule_txq(hw, txq, true);
+}
+
+/**
+ * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq()
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface
+ * @force: schedule txq even if mac80211 does not have any buffered packets.
+ *
+ * The driver may set force=true if it has buffered packets for this TXQ
+ * internally.
+ */
+static inline void
+ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq,
+ bool force)
+{
+ __ieee80211_schedule_txq(hw, txq, force);
+}
+
+/**
+ * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit
+ *
+ * This function is used to check whether given txq is allowed to transmit by
+ * the airtime scheduler, and can be used by drivers to access the airtime
+ * fairness accounting without going using the scheduling order enfored by
+ * next_txq().
+ *
+ * Returns %true if the airtime scheduler thinks the TXQ should be allowed to
+ * transmit, and %false if it should be throttled. This function can also have
+ * the side effect of rotating the TXQ in the scheduler rotation, which will
+ * eventually bring the deficit to positive and allow the station to transmit
+ * again.
+ *
+ * The API ieee80211_txq_may_transmit() also ensures that TXQ list will be
+ * aligned against driver's own round-robin scheduler list. i.e it rotates
+ * the TXQ list till it makes the requested node becomes the first entry
+ * in TXQ list. Thus both the TXQ list and driver's list are in sync. If this
+ * function returns %true, the driver is expected to schedule packets
+ * for transmission, and then return the TXQ through ieee80211_return_txq().
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface
+ */
+bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw,
+ struct ieee80211_txq *txq);
/**
* ieee80211_txq_get_depth - get pending frame/byte count of given txq
@@ -6022,4 +6654,69 @@
struct cfg80211_nan_match_params *match,
gfp_t gfp);
+/**
+ * ieee80211_calc_rx_airtime - calculate estimated transmission airtime for RX.
+ *
+ * This function calculates the estimated airtime usage of a frame based on the
+ * rate information in the RX status struct and the frame length.
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @status: &struct ieee80211_rx_status containing the transmission rate
+ * information.
+ * @len: frame length in bytes
+ */
+u32 ieee80211_calc_rx_airtime(struct ieee80211_hw *hw,
+ struct ieee80211_rx_status *status,
+ int len);
+
+/**
+ * ieee80211_calc_tx_airtime - calculate estimated transmission airtime for TX.
+ *
+ * This function calculates the estimated airtime usage of a frame based on the
+ * rate information in the TX info struct and the frame length.
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @info: &struct ieee80211_tx_info of the frame.
+ * @len: frame length in bytes
+ */
+u32 ieee80211_calc_tx_airtime(struct ieee80211_hw *hw,
+ struct ieee80211_tx_info *info,
+ int len);
+/**
+ * ieee80211_set_hw_80211_encap - enable hardware encapsulation offloading.
+ *
+ * This function is used to notify mac80211 that a vif can be passed raw 802.3
+ * frames. The driver needs to then handle the 802.11 encapsulation inside the
+ * hardware or firmware.
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @enable: indicate if the feature should be turned on or off
+ */
+bool ieee80211_set_hw_80211_encap(struct ieee80211_vif *vif, bool enable);
+
+/**
+ * ieee80211_get_fils_discovery_tmpl - Get FILS discovery template.
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * The driver is responsible for freeing the returned skb.
+ *
+ * Return: FILS discovery template. %NULL on error.
+ */
+struct sk_buff *ieee80211_get_fils_discovery_tmpl(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
+
+/**
+ * ieee80211_get_unsol_bcast_probe_resp_tmpl - Get unsolicited broadcast
+ * probe response template.
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * The driver is responsible for freeing the returned skb.
+ *
+ * Return: Unsolicited broadcast probe response template. %NULL on error.
+ */
+struct sk_buff *
+ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
#endif /* MAC80211_H */
--
Gitblit v1.6.2