From 244b2c5ca8b14627e4a17755e5922221e121c771 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 09 Oct 2024 06:15:07 +0000
Subject: [PATCH] change system file
---
kernel/include/drm/drm_modeset_helper_vtables.h | 222 ++++++++++++++++++++++++++++++++++++++++++++++---------
1 files changed, 185 insertions(+), 37 deletions(-)
diff --git a/kernel/include/drm/drm_modeset_helper_vtables.h b/kernel/include/drm/drm_modeset_helper_vtables.h
index 7aea03b..4efec30 100644
--- a/kernel/include/drm/drm_modeset_helper_vtables.h
+++ b/kernel/include/drm/drm_modeset_helper_vtables.h
@@ -49,6 +49,8 @@
*/
enum mode_set_atomic;
+struct drm_writeback_connector;
+struct drm_writeback_job;
/**
* struct drm_crtc_helper_funcs - helper operations for CRTCs
@@ -418,6 +420,8 @@
* Drivers can use the @old_crtc_state input parameter if the operations
* needed to enable the CRTC don't depend solely on the new state but
* also on the transition between the old state and the new state.
+ *
+ * This function is optional.
*/
void (*atomic_enable)(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
@@ -441,9 +445,58 @@
* parameter @old_crtc_state which could be used to access the old
* state. Atomic drivers should consider to use this one instead
* of @disable.
+ *
+ * This function is optional.
*/
void (*atomic_disable)(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state);
+
+ /**
+ * @get_scanout_position:
+ *
+ * Called by vblank timestamping code.
+ *
+ * Returns the current display scanout position from a CRTC and an
+ * optional accurate ktime_get() timestamp of when the position was
+ * measured. Note that this is a helper callback which is only used
+ * if a driver uses drm_crtc_vblank_helper_get_vblank_timestamp()
+ * for the @drm_crtc_funcs.get_vblank_timestamp callback.
+ *
+ * Parameters:
+ *
+ * crtc:
+ * The CRTC.
+ * in_vblank_irq:
+ * True when called from drm_crtc_handle_vblank(). Some drivers
+ * need to apply some workarounds for gpu-specific vblank irq
+ * quirks if the flag is set.
+ * vpos:
+ * Target location for current vertical scanout position.
+ * hpos:
+ * Target location for current horizontal scanout position.
+ * stime:
+ * Target location for timestamp taken immediately before
+ * scanout position query. Can be NULL to skip timestamp.
+ * etime:
+ * Target location for timestamp taken immediately after
+ * scanout position query. Can be NULL to skip timestamp.
+ * mode:
+ * Current display timings.
+ *
+ * Returns vpos as a positive number while in active scanout area.
+ * Returns vpos as a negative number inside vblank, counting the number
+ * of scanlines to go until end of vblank, e.g., -1 means "one scanline
+ * until start of active scanout / end of vblank."
+ *
+ * Returns:
+ *
+ * True on success, false if a reliable scanout position counter could
+ * not be read out.
+ */
+ bool (*get_scanout_position)(struct drm_crtc *crtc,
+ bool in_vblank_irq, int *vpos, int *hpos,
+ ktime_t *stime, ktime_t *etime,
+ const struct drm_display_mode *mode);
};
/**
@@ -464,11 +517,6 @@
* helpers and the new atomic modesetting helpers.
*/
struct drm_encoder_helper_funcs {
- /**
- * @loader_protect:
- * protect loader logo encoder's power.
- */
- int (*loader_protect)(struct drm_encoder *encoder, bool on);
/**
* @dpms:
*
@@ -645,22 +693,6 @@
struct drm_connector_state *conn_state);
/**
- * @get_crtc:
- *
- * This callback is used by the legacy CRTC helpers to work around
- * deficiencies in its own book-keeping.
- *
- * Do not use, use atomic helpers instead, which get the book keeping
- * right.
- *
- * FIXME:
- *
- * Currently only nouveau is using this, and as soon as nouveau is
- * atomic we can ditch this hook.
- */
- struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder);
-
- /**
* @detect:
*
* This callback can be used by drivers who want to do detection on the
@@ -679,6 +711,52 @@
struct drm_connector *connector);
/**
+ * @atomic_disable:
+ *
+ * This callback should be used to disable the encoder. With the atomic
+ * drivers it is called before this encoder's CRTC has been shut off
+ * using their own &drm_crtc_helper_funcs.atomic_disable hook. If that
+ * sequence is too simple drivers can just add their own driver private
+ * encoder hooks and call them from CRTC's callback by looping over all
+ * encoders connected to it using for_each_encoder_on_crtc().
+ *
+ * This callback is a variant of @disable that provides the atomic state
+ * to the driver. If @atomic_disable is implemented, @disable is not
+ * called by the helpers.
+ *
+ * This hook is only used by atomic helpers. Atomic drivers don't need
+ * to implement it if there's no need to disable anything at the encoder
+ * level. To ensure that runtime PM handling (using either DPMS or the
+ * new "ACTIVE" property) works @atomic_disable must be the inverse of
+ * @atomic_enable.
+ */
+ void (*atomic_disable)(struct drm_encoder *encoder,
+ struct drm_atomic_state *state);
+
+ /**
+ * @atomic_enable:
+ *
+ * This callback should be used to enable the encoder. It is called
+ * after this encoder's CRTC has been enabled using their own
+ * &drm_crtc_helper_funcs.atomic_enable hook. If that sequence is
+ * too simple drivers can just add their own driver private encoder
+ * hooks and call them from CRTC's callback by looping over all encoders
+ * connected to it using for_each_encoder_on_crtc().
+ *
+ * This callback is a variant of @enable that provides the atomic state
+ * to the driver. If @atomic_enable is implemented, @enable is not
+ * called by the helpers.
+ *
+ * This hook is only used by atomic helpers, it is the opposite of
+ * @atomic_disable. Atomic drivers don't need to implement it if there's
+ * no need to enable anything at the encoder level. To ensure that
+ * runtime PM handling works @atomic_enable must be the inverse of
+ * @atomic_disable.
+ */
+ void (*atomic_enable)(struct drm_encoder *encoder,
+ struct drm_atomic_state *state);
+
+ /**
* @disable:
*
* This callback should be used to disable the encoder. With the atomic
@@ -693,6 +771,9 @@
* disable anything at the encoder level. To ensure that runtime PM
* handling (using either DPMS or the new "ACTIVE" property) works
* @disable must be the inverse of @enable for atomic drivers.
+ *
+ * For atomic drivers also consider @atomic_disable and save yourself
+ * from having to read the NOTE below!
*
* NOTE:
*
@@ -718,11 +799,11 @@
* hooks and call them from CRTC's callback by looping over all encoders
* connected to it using for_each_encoder_on_crtc().
*
- * This hook is used only by atomic helpers, for symmetry with @disable.
- * Atomic drivers don't need to implement it if there's no need to
- * enable anything at the encoder level. To ensure that runtime PM handling
- * (using either DPMS or the new "ACTIVE" property) works
- * @enable must be the inverse of @disable for atomic drivers.
+ * This hook is only used by atomic helpers, it is the opposite of
+ * @disable. Atomic drivers don't need to implement it if there's no
+ * need to enable anything at the encoder level. To ensure that
+ * runtime PM handling (using either DPMS or the new "ACTIVE" property)
+ * works @enable must be the inverse of @disable for atomic drivers.
*/
void (*enable)(struct drm_encoder *encoder);
@@ -785,12 +866,6 @@
* probe helpers.
*/
struct drm_connector_helper_funcs {
- /**
- * @loader_protect:
- *
- * protect loader logo connector's power
- */
- int (*loader_protect)(struct drm_connector *connector, bool on);
/**
* @get_modes:
*
@@ -893,6 +968,48 @@
*/
enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
struct drm_display_mode *mode);
+
+ /**
+ * @mode_valid_ctx:
+ *
+ * Callback to validate a mode for a connector, irrespective of the
+ * specific display configuration.
+ *
+ * This callback is used by the probe helpers to filter the mode list
+ * (which is usually derived from the EDID data block from the sink).
+ * See e.g. drm_helper_probe_single_connector_modes().
+ *
+ * This function is optional, and is the atomic version of
+ * &drm_connector_helper_funcs.mode_valid.
+ *
+ * To allow for accessing the atomic state of modesetting objects, the
+ * helper libraries always call this with ctx set to a valid context,
+ * and &drm_mode_config.connection_mutex will always be locked with
+ * the ctx parameter set to @ctx. This allows for taking additional
+ * locks as required.
+ *
+ * Even though additional locks may be acquired, this callback is
+ * still expected not to take any constraints into account which would
+ * be influenced by the currently set display state - such constraints
+ * should be handled in the driver's atomic check. For example, if a
+ * connector shares display bandwidth with other connectors then it
+ * would be ok to validate the minimum bandwidth requirement of a mode
+ * against the maximum possible bandwidth of the connector. But it
+ * wouldn't be ok to take the current bandwidth usage of other
+ * connectors into account, as this would change depending on the
+ * display state.
+ *
+ * Returns:
+ * 0 if &drm_connector_helper_funcs.mode_valid_ctx succeeded and wrote
+ * the &enum drm_mode_status value to @status, or a negative error
+ * code otherwise.
+ *
+ */
+ int (*mode_valid_ctx)(struct drm_connector *connector,
+ struct drm_display_mode *mode,
+ struct drm_modeset_acquire_ctx *ctx,
+ enum drm_mode_status *status);
+
/**
* @best_encoder:
*
@@ -911,9 +1028,8 @@
* @atomic_best_encoder.
*
* You can leave this function to NULL if the connector is only
- * attached to a single encoder and you are using the atomic helpers.
- * In this case, the core will call drm_atomic_helper_best_encoder()
- * for you.
+ * attached to a single encoder. In this case, the core will call
+ * drm_connector_get_single_encoder() for you.
*
* RETURNS:
*
@@ -933,7 +1049,7 @@
*
* This function is used by drm_atomic_helper_check_modeset().
* If it is not implemented, the core will fallback to @best_encoder
- * (or drm_atomic_helper_best_encoder() if @best_encoder is NULL).
+ * (or drm_connector_get_single_encoder() if @best_encoder is NULL).
*
* NOTE:
*
@@ -1000,6 +1116,38 @@
*/
void (*atomic_commit)(struct drm_connector *connector,
struct drm_connector_state *state);
+
+ /**
+ * @prepare_writeback_job:
+ *
+ * As writeback jobs contain a framebuffer, drivers may need to
+ * prepare and clean them up the same way they can prepare and
+ * clean up framebuffers for planes. This optional connector operation
+ * is used to support the preparation of writeback jobs. The job
+ * prepare operation is called from drm_atomic_helper_prepare_planes()
+ * for struct &drm_writeback_connector connectors only.
+ *
+ * This operation is optional.
+ *
+ * This callback is used by the atomic modeset helpers.
+ */
+ int (*prepare_writeback_job)(struct drm_writeback_connector *connector,
+ struct drm_writeback_job *job);
+ /**
+ * @cleanup_writeback_job:
+ *
+ * This optional connector operation is used to support the
+ * cleanup of writeback jobs. The job cleanup operation is called
+ * from the existing drm_writeback_cleanup_job() function, invoked
+ * both when destroying the job as part of an aborted commit, or when
+ * the job completes.
+ *
+ * This operation is optional.
+ *
+ * This callback is used by the atomic modeset helpers.
+ */
+ void (*cleanup_writeback_job)(struct drm_writeback_connector *connector,
+ struct drm_writeback_job *job);
};
/**
@@ -1024,7 +1172,7 @@
* @prepare_fb:
*
* This hook is to prepare a framebuffer for scanout by e.g. pinning
- * it's backing storage or relocating it into a contiguous block of
+ * its backing storage or relocating it into a contiguous block of
* VRAM. Other possible preparatory work includes flushing caches.
*
* This function must not block for outstanding rendering, since it is
--
Gitblit v1.6.2