From 244b2c5ca8b14627e4a17755e5922221e121c771 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 09 Oct 2024 06:15:07 +0000
Subject: [PATCH] change system file
---
kernel/drivers/spi/spidev.c | 80 +++++++++++++++++++++++----------------
1 files changed, 47 insertions(+), 33 deletions(-)
diff --git a/kernel/drivers/spi/spidev.c b/kernel/drivers/spi/spidev.c
index 1de2204..e08de32 100644
--- a/kernel/drivers/spi/spidev.c
+++ b/kernel/drivers/spi/spidev.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Simple synchronous userspace interface to SPI devices
*
* Copyright (C) 2006 SWAPP
* Andrea Paterniani <a.paterniani@swapp-eng.it>
* Copyright (C) 2007 David Brownell (simplification, cleanup)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/init.h>
@@ -71,7 +62,8 @@
#define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
| SPI_NO_CS | SPI_READY | SPI_TX_DUAL \
- | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)
+ | SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL \
+ | SPI_RX_QUAD | SPI_RX_OCTAL)
struct spidev_data {
dev_t devt;
@@ -154,7 +146,7 @@
spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
- ssize_t status = 0;
+ ssize_t status;
/* chipselect only toggles at start or end of operation */
if (count > bufsiz)
@@ -184,7 +176,7 @@
size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
- ssize_t status = 0;
+ ssize_t status;
unsigned long missing;
/* chipselect only toggles at start or end of operation */
@@ -279,20 +271,24 @@
k_tmp->tx_nbits = u_tmp->tx_nbits;
k_tmp->rx_nbits = u_tmp->rx_nbits;
k_tmp->bits_per_word = u_tmp->bits_per_word;
- k_tmp->delay_usecs = u_tmp->delay_usecs;
+ k_tmp->delay.value = u_tmp->delay_usecs;
+ k_tmp->delay.unit = SPI_DELAY_UNIT_USECS;
k_tmp->speed_hz = u_tmp->speed_hz;
+ k_tmp->word_delay.value = u_tmp->word_delay_usecs;
+ k_tmp->word_delay.unit = SPI_DELAY_UNIT_USECS;
if (!k_tmp->speed_hz)
k_tmp->speed_hz = spidev->speed_hz;
#ifdef VERBOSE
dev_dbg(&spidev->spi->dev,
- " xfer len %u %s%s%s%dbits %u usec %uHz\n",
- u_tmp->len,
- u_tmp->rx_buf ? "rx " : "",
- u_tmp->tx_buf ? "tx " : "",
- u_tmp->cs_change ? "cs " : "",
- u_tmp->bits_per_word ? : spidev->spi->bits_per_word,
- u_tmp->delay_usecs,
- u_tmp->speed_hz ? : spidev->spi->max_speed_hz);
+ " xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n",
+ k_tmp->len,
+ k_tmp->rx_buf ? "rx " : "",
+ k_tmp->tx_buf ? "tx " : "",
+ k_tmp->cs_change ? "cs " : "",
+ k_tmp->bits_per_word ? : spidev->spi->bits_per_word,
+ k_tmp->delay.value,
+ k_tmp->word_delay.value,
+ k_tmp->speed_hz ? : spidev->spi->max_speed_hz);
#endif
spi_message_add_tail(k_tmp, &msg);
}
@@ -380,12 +376,23 @@
switch (cmd) {
/* read requests */
case SPI_IOC_RD_MODE:
- retval = put_user(spi->mode & SPI_MODE_MASK,
- (__u8 __user *)arg);
- break;
case SPI_IOC_RD_MODE32:
- retval = put_user(spi->mode & SPI_MODE_MASK,
- (__u32 __user *)arg);
+ tmp = spi->mode;
+
+ {
+ struct spi_controller *ctlr = spi->controller;
+
+ if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
+ ctlr->cs_gpiods[spi->chip_select])
+ tmp &= ~SPI_CS_HIGH;
+ }
+
+ if (cmd == SPI_IOC_RD_MODE)
+ retval = put_user(tmp & SPI_MODE_MASK,
+ (__u8 __user *)arg);
+ else
+ retval = put_user(tmp & SPI_MODE_MASK,
+ (__u32 __user *)arg);
break;
case SPI_IOC_RD_LSB_FIRST:
retval = put_user((spi->mode & SPI_LSB_FIRST) ? 1 : 0,
@@ -406,12 +413,17 @@
else
retval = get_user(tmp, (u32 __user *)arg);
if (retval == 0) {
+ struct spi_controller *ctlr = spi->controller;
u32 save = spi->mode;
if (tmp & ~SPI_MODE_MASK) {
retval = -EINVAL;
break;
}
+
+ if (ctlr->use_gpio_descriptors && ctlr->cs_gpiods &&
+ ctlr->cs_gpiods[spi->chip_select])
+ tmp |= SPI_CS_HIGH;
tmp |= spi->mode & ~SPI_MODE_MASK;
spi->mode = (u16)tmp;
@@ -459,10 +471,11 @@
spi->max_speed_hz = tmp;
retval = spi_setup(spi);
- if (retval >= 0)
+ if (retval == 0) {
spidev->speed_hz = tmp;
- else
- dev_dbg(&spi->dev, "%d Hz (max)\n", tmp);
+ dev_dbg(&spi->dev, "%d Hz (max)\n",
+ spidev->speed_hz);
+ }
spi->max_speed_hz = save;
}
break;
@@ -579,7 +592,6 @@
if (!spidev->tx_buffer) {
spidev->tx_buffer = kmalloc(bufsiz, GFP_KERNEL);
if (!spidev->tx_buffer) {
- dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
status = -ENOMEM;
goto err_find_dev;
}
@@ -588,7 +600,6 @@
if (!spidev->rx_buffer) {
spidev->rx_buffer = kmalloc(bufsiz, GFP_KERNEL);
if (!spidev->rx_buffer) {
- dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
status = -ENOMEM;
goto err_alloc_rx_buf;
}
@@ -596,7 +607,7 @@
spidev->users++;
filp->private_data = spidev;
- nonseekable_open(inode, filp);
+ stream_open(inode, filp);
mutex_unlock(&device_list_lock);
return 0;
@@ -677,6 +688,9 @@
{ .compatible = "lineartechnology,ltc2488" },
{ .compatible = "ge,achc" },
{ .compatible = "semtech,sx1301" },
+ { .compatible = "lwn,bk4" },
+ { .compatible = "dh,dhcom-board" },
+ { .compatible = "menlo,m53cpld" },
{ .compatible = "rockchip,spidev" },
{},
};
--
Gitblit v1.6.2