From 244b2c5ca8b14627e4a17755e5922221e121c771 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 09 Oct 2024 06:15:07 +0000
Subject: [PATCH] change system file
---
kernel/drivers/pinctrl/bcm/pinctrl-bcm2835.c | 372 +++++++++++++++++++++++++++++++++++++++++++----------
1 files changed, 302 insertions(+), 70 deletions(-)
diff --git a/kernel/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/kernel/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 1bd3c10..6768b2f 100644
--- a/kernel/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/kernel/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
*
@@ -6,16 +7,6 @@
* This driver is inspired by:
* pinctrl-nomadik.c, please see original file for copyright information
* pinctrl-tegra.c, please see original file for copyright information
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/bitmap.h>
@@ -28,6 +19,7 @@
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/of_address.h>
#include <linux/of.h>
#include <linux/of_irq.h>
@@ -46,11 +38,9 @@
#define MODULE_NAME "pinctrl-bcm2835"
#define BCM2835_NUM_GPIOS 54
+#define BCM2711_NUM_GPIOS 58
#define BCM2835_NUM_BANKS 2
#define BCM2835_NUM_IRQS 3
-
-#define BCM2835_PIN_BITMAP_SZ \
- DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
/* GPIO register offsets */
#define GPFSEL0 0x0 /* Function Select */
@@ -66,26 +56,36 @@
#define GPAFEN0 0x88 /* Pin Async Falling Edge Detect */
#define GPPUD 0x94 /* Pin Pull-up/down Enable */
#define GPPUDCLK0 0x98 /* Pin Pull-up/down Enable Clock */
+#define GP_GPIO_PUP_PDN_CNTRL_REG0 0xe4 /* 2711 Pin Pull-up/down select */
#define FSEL_REG(p) (GPFSEL0 + (((p) / 10) * 4))
#define FSEL_SHIFT(p) (((p) % 10) * 3)
#define GPIO_REG_OFFSET(p) ((p) / 32)
#define GPIO_REG_SHIFT(p) ((p) % 32)
+#define PUD_2711_MASK 0x3
+#define PUD_2711_REG_OFFSET(p) ((p) / 16)
+#define PUD_2711_REG_SHIFT(p) (((p) % 16) * 2)
+
/* argument: bcm2835_pinconf_pull */
#define BCM2835_PINCONF_PARAM_PULL (PIN_CONFIG_END + 1)
+
+#define BCM2711_PULL_NONE 0x0
+#define BCM2711_PULL_UP 0x1
+#define BCM2711_PULL_DOWN 0x2
struct bcm2835_pinctrl {
struct device *dev;
void __iomem *base;
- int irq[BCM2835_NUM_IRQS];
+ int *wake_irq;
/* note: locking assumes each bank will have its own unsigned long */
unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
- unsigned int irq_type[BCM2835_NUM_GPIOS];
+ unsigned int irq_type[BCM2711_NUM_GPIOS];
struct pinctrl_dev *pctl_dev;
struct gpio_chip gpio_chip;
+ struct pinctrl_desc pctl_desc;
struct pinctrl_gpio_range gpio_range;
raw_spinlock_t irq_lock[BCM2835_NUM_BANKS];
@@ -148,6 +148,10 @@
BCM2835_GPIO_PIN(51),
BCM2835_GPIO_PIN(52),
BCM2835_GPIO_PIN(53),
+ BCM2835_GPIO_PIN(54),
+ BCM2835_GPIO_PIN(55),
+ BCM2835_GPIO_PIN(56),
+ BCM2835_GPIO_PIN(57),
};
/* one pin per group */
@@ -206,6 +210,10 @@
"gpio51",
"gpio52",
"gpio53",
+ "gpio54",
+ "gpio55",
+ "gpio56",
+ "gpio57",
};
enum bcm2835_fsel {
@@ -323,7 +331,10 @@
if (fsel > BCM2835_FSEL_GPIO_OUT)
return -EINVAL;
- return (fsel == BCM2835_FSEL_GPIO_IN);
+ if (fsel == BCM2835_FSEL_GPIO_IN)
+ return GPIO_LINE_DIRECTION_IN;
+
+ return GPIO_LINE_DIRECTION_OUT;
}
static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -350,8 +361,25 @@
.get_direction = bcm2835_gpio_get_direction,
.get = bcm2835_gpio_get,
.set = bcm2835_gpio_set,
+ .set_config = gpiochip_generic_config,
.base = -1,
.ngpio = BCM2835_NUM_GPIOS,
+ .can_sleep = false,
+};
+
+static const struct gpio_chip bcm2711_gpio_chip = {
+ .label = "pinctrl-bcm2711",
+ .owner = THIS_MODULE,
+ .request = gpiochip_generic_request,
+ .free = gpiochip_generic_free,
+ .direction_input = bcm2835_gpio_direction_input,
+ .direction_output = bcm2835_gpio_direction_output,
+ .get_direction = bcm2835_gpio_get_direction,
+ .get = bcm2835_gpio_get,
+ .set = bcm2835_gpio_set,
+ .set_config = gpiochip_generic_config,
+ .base = -1,
+ .ngpio = BCM2711_NUM_GPIOS,
.can_sleep = false,
};
@@ -381,14 +409,14 @@
int group;
int i;
- for (i = 0; i < ARRAY_SIZE(pc->irq); i++) {
- if (pc->irq[i] == irq) {
+ for (i = 0; i < BCM2835_NUM_IRQS; i++) {
+ if (chip->irq.parents[i] == irq) {
group = i;
break;
}
}
/* This should not happen, every IRQ has a bank */
- if (i == ARRAY_SIZE(pc->irq))
+ if (i == BCM2835_NUM_IRQS)
BUG();
chained_irq_enter(host_chip, desc);
@@ -401,12 +429,17 @@
bcm2835_gpio_irq_handle_bank(pc, 0, 0xf0000000);
bcm2835_gpio_irq_handle_bank(pc, 1, 0x00003fff);
break;
- case 2: /* IRQ2 covers GPIOs 46-53 */
+ case 2: /* IRQ2 covers GPIOs 46-57 */
bcm2835_gpio_irq_handle_bank(pc, 1, 0x003fc000);
break;
}
chained_irq_exit(host_chip, desc);
+}
+
+static irqreturn_t bcm2835_gpio_wake_irq_handler(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
}
static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
@@ -608,6 +641,34 @@
bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
}
+static int bcm2835_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
+ unsigned gpio = irqd_to_hwirq(data);
+ unsigned int irqgroup;
+ int ret = -EINVAL;
+
+ if (!pc->wake_irq)
+ return ret;
+
+ if (gpio <= 27)
+ irqgroup = 0;
+ else if (gpio >= 28 && gpio <= 45)
+ irqgroup = 1;
+ else if (gpio >= 46 && gpio <= 57)
+ irqgroup = 2;
+ else
+ return ret;
+
+ if (on)
+ ret = enable_irq_wake(pc->wake_irq[irqgroup]);
+ else
+ ret = disable_irq_wake(pc->wake_irq[irqgroup]);
+
+ return ret;
+}
+
static struct irq_chip bcm2835_gpio_irq_chip = {
.name = MODULE_NAME,
.irq_enable = bcm2835_gpio_irq_enable,
@@ -616,11 +677,13 @@
.irq_ack = bcm2835_gpio_irq_ack,
.irq_mask = bcm2835_gpio_irq_disable,
.irq_unmask = bcm2835_gpio_irq_enable,
+ .irq_set_wake = bcm2835_gpio_irq_set_wake,
+ .flags = IRQCHIP_MASK_ON_SUSPEND,
};
static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
{
- return ARRAY_SIZE(bcm2835_gpio_groups);
+ return BCM2835_NUM_GPIOS;
}
static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
@@ -778,7 +841,7 @@
err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
if (err)
goto out;
- if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
+ if (pin >= pc->pctl_desc.npins) {
dev_err(pc->dev, "%pOF: invalid brcm,pins value %d\n",
np, pin);
err = -EINVAL;
@@ -854,7 +917,7 @@
{
/* every pin can do every function */
*groups = bcm2835_gpio_groups;
- *num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
+ *num_groups = BCM2835_NUM_GPIOS;
return 0;
}
@@ -969,7 +1032,7 @@
break;
default:
- return -EINVAL;
+ return -ENOTSUPP;
} /* switch param type */
} /* for each config */
@@ -978,34 +1041,160 @@
}
static const struct pinconf_ops bcm2835_pinconf_ops = {
+ .is_generic = true,
.pin_config_get = bcm2835_pinconf_get,
.pin_config_set = bcm2835_pinconf_set,
};
-static struct pinctrl_desc bcm2835_pinctrl_desc = {
+static void bcm2711_pull_config_set(struct bcm2835_pinctrl *pc,
+ unsigned int pin, unsigned int arg)
+{
+ u32 shifter;
+ u32 value;
+ u32 off;
+
+ off = PUD_2711_REG_OFFSET(pin);
+ shifter = PUD_2711_REG_SHIFT(pin);
+
+ value = bcm2835_gpio_rd(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4));
+ value &= ~(PUD_2711_MASK << shifter);
+ value |= (arg << shifter);
+ bcm2835_gpio_wr(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4), value);
+}
+
+static int bcm2711_pinconf_set(struct pinctrl_dev *pctldev,
+ unsigned int pin, unsigned long *configs,
+ unsigned int num_configs)
+{
+ struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+ u32 param, arg;
+ int i;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ /* convert legacy brcm,pull */
+ case BCM2835_PINCONF_PARAM_PULL:
+ if (arg == BCM2835_PUD_UP)
+ arg = BCM2711_PULL_UP;
+ else if (arg == BCM2835_PUD_DOWN)
+ arg = BCM2711_PULL_DOWN;
+ else
+ arg = BCM2711_PULL_NONE;
+
+ bcm2711_pull_config_set(pc, pin, arg);
+ break;
+
+ /* Set pull generic bindings */
+ case PIN_CONFIG_BIAS_DISABLE:
+ bcm2711_pull_config_set(pc, pin, BCM2711_PULL_NONE);
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ bcm2711_pull_config_set(pc, pin, BCM2711_PULL_DOWN);
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ bcm2711_pull_config_set(pc, pin, BCM2711_PULL_UP);
+ break;
+
+ /* Set output-high or output-low */
+ case PIN_CONFIG_OUTPUT:
+ bcm2835_gpio_set_bit(pc, arg ? GPSET0 : GPCLR0, pin);
+ break;
+
+ default:
+ return -ENOTSUPP;
+ }
+ } /* for each config */
+
+ return 0;
+}
+
+static const struct pinconf_ops bcm2711_pinconf_ops = {
+ .is_generic = true,
+ .pin_config_get = bcm2835_pinconf_get,
+ .pin_config_set = bcm2711_pinconf_set,
+};
+
+static const struct pinctrl_desc bcm2835_pinctrl_desc = {
.name = MODULE_NAME,
.pins = bcm2835_gpio_pins,
- .npins = ARRAY_SIZE(bcm2835_gpio_pins),
+ .npins = BCM2835_NUM_GPIOS,
.pctlops = &bcm2835_pctl_ops,
.pmxops = &bcm2835_pmx_ops,
.confops = &bcm2835_pinconf_ops,
.owner = THIS_MODULE,
};
-static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
+static const struct pinctrl_desc bcm2711_pinctrl_desc = {
+ .name = "pinctrl-bcm2711",
+ .pins = bcm2835_gpio_pins,
+ .npins = BCM2711_NUM_GPIOS,
+ .pctlops = &bcm2835_pctl_ops,
+ .pmxops = &bcm2835_pmx_ops,
+ .confops = &bcm2711_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static const struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
.name = MODULE_NAME,
.npins = BCM2835_NUM_GPIOS,
+};
+
+static const struct pinctrl_gpio_range bcm2711_pinctrl_gpio_range = {
+ .name = "pinctrl-bcm2711",
+ .npins = BCM2711_NUM_GPIOS,
+};
+
+struct bcm_plat_data {
+ const struct gpio_chip *gpio_chip;
+ const struct pinctrl_desc *pctl_desc;
+ const struct pinctrl_gpio_range *gpio_range;
+};
+
+static const struct bcm_plat_data bcm2835_plat_data = {
+ .gpio_chip = &bcm2835_gpio_chip,
+ .pctl_desc = &bcm2835_pinctrl_desc,
+ .gpio_range = &bcm2835_pinctrl_gpio_range,
+};
+
+static const struct bcm_plat_data bcm2711_plat_data = {
+ .gpio_chip = &bcm2711_gpio_chip,
+ .pctl_desc = &bcm2711_pinctrl_desc,
+ .gpio_range = &bcm2711_pinctrl_gpio_range,
+};
+
+static const struct of_device_id bcm2835_pinctrl_match[] = {
+ {
+ .compatible = "brcm,bcm2835-gpio",
+ .data = &bcm2835_plat_data,
+ },
+ {
+ .compatible = "brcm,bcm2711-gpio",
+ .data = &bcm2711_plat_data,
+ },
+ {
+ .compatible = "brcm,bcm7211-gpio",
+ .data = &bcm2711_plat_data,
+ },
+ {}
};
static int bcm2835_pinctrl_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ const struct bcm_plat_data *pdata;
struct bcm2835_pinctrl *pc;
+ struct gpio_irq_chip *girq;
struct resource iomem;
int err, i;
- BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
- BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
+ const struct of_device_id *match;
+ int is_7211 = 0;
+
+ BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2711_NUM_GPIOS);
+ BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2711_NUM_GPIOS);
pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
if (!pc)
@@ -1024,7 +1213,14 @@
if (IS_ERR(pc->base))
return PTR_ERR(pc->base);
- pc->gpio_chip = bcm2835_gpio_chip;
+ match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
+ if (!match)
+ return -EINVAL;
+
+ pdata = match->data;
+ is_7211 = of_device_is_compatible(np, "brcm,bcm7211-gpio");
+
+ pc->gpio_chip = *pdata->gpio_chip;
pc->gpio_chip.parent = dev;
pc->gpio_chip.of_node = np;
@@ -1048,56 +1244,92 @@
raw_spin_lock_init(&pc->irq_lock[i]);
}
- err = gpiochip_add_data(&pc->gpio_chip, pc);
- if (err) {
- dev_err(dev, "could not add GPIO chip\n");
- return err;
- }
-
- err = gpiochip_irqchip_add(&pc->gpio_chip, &bcm2835_gpio_irq_chip,
- 0, handle_level_irq, IRQ_TYPE_NONE);
- if (err) {
- dev_info(dev, "could not add irqchip\n");
- return err;
- }
-
- for (i = 0; i < BCM2835_NUM_IRQS; i++) {
- pc->irq[i] = irq_of_parse_and_map(np, i);
-
- if (pc->irq[i] == 0)
- continue;
-
- /*
- * Use the same handler for all groups: this is necessary
- * since we use one gpiochip to cover all lines - the
- * irq handler then needs to figure out which group and
- * bank that was firing the IRQ and look up the per-group
- * and bank data.
- */
- gpiochip_set_chained_irqchip(&pc->gpio_chip,
- &bcm2835_gpio_irq_chip,
- pc->irq[i],
- bcm2835_gpio_irq_handler);
- }
-
- pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
+ pc->pctl_desc = *pdata->pctl_desc;
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
if (IS_ERR(pc->pctl_dev)) {
gpiochip_remove(&pc->gpio_chip);
return PTR_ERR(pc->pctl_dev);
}
- pc->gpio_range = bcm2835_pinctrl_gpio_range;
+ pc->gpio_range = *pdata->gpio_range;
pc->gpio_range.base = pc->gpio_chip.base;
pc->gpio_range.gc = &pc->gpio_chip;
pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
- return 0;
-}
+ girq = &pc->gpio_chip.irq;
+ girq->chip = &bcm2835_gpio_irq_chip;
+ girq->parent_handler = bcm2835_gpio_irq_handler;
+ girq->num_parents = BCM2835_NUM_IRQS;
+ girq->parents = devm_kcalloc(dev, BCM2835_NUM_IRQS,
+ sizeof(*girq->parents),
+ GFP_KERNEL);
+ if (!girq->parents) {
+ err = -ENOMEM;
+ goto out_remove;
+ }
-static const struct of_device_id bcm2835_pinctrl_match[] = {
- { .compatible = "brcm,bcm2835-gpio" },
- {}
-};
+ if (is_7211) {
+ pc->wake_irq = devm_kcalloc(dev, BCM2835_NUM_IRQS,
+ sizeof(*pc->wake_irq),
+ GFP_KERNEL);
+ if (!pc->wake_irq) {
+ err = -ENOMEM;
+ goto out_remove;
+ }
+ }
+
+ /*
+ * Use the same handler for all groups: this is necessary
+ * since we use one gpiochip to cover all lines - the
+ * irq handler then needs to figure out which group and
+ * bank that was firing the IRQ and look up the per-group
+ * and bank data.
+ */
+ for (i = 0; i < BCM2835_NUM_IRQS; i++) {
+ int len;
+ char *name;
+
+ girq->parents[i] = irq_of_parse_and_map(np, i);
+ if (!is_7211)
+ continue;
+
+ /* Skip over the all banks interrupts */
+ pc->wake_irq[i] = irq_of_parse_and_map(np, i +
+ BCM2835_NUM_IRQS + 1);
+
+ len = strlen(dev_name(pc->dev)) + 16;
+ name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
+ if (!name) {
+ err = -ENOMEM;
+ goto out_remove;
+ }
+
+ snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
+
+ /* These are optional interrupts */
+ err = devm_request_irq(dev, pc->wake_irq[i],
+ bcm2835_gpio_wake_irq_handler,
+ IRQF_SHARED, name, pc);
+ if (err)
+ dev_warn(dev, "unable to request wake IRQ %d\n",
+ pc->wake_irq[i]);
+ }
+
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_level_irq;
+
+ err = gpiochip_add_data(&pc->gpio_chip, pc);
+ if (err) {
+ dev_err(dev, "could not add GPIO chip\n");
+ goto out_remove;
+ }
+
+ return 0;
+
+out_remove:
+ pinctrl_remove_gpio_range(pc->pctl_dev, &pc->gpio_range);
+ return err;
+}
static struct platform_driver bcm2835_pinctrl_driver = {
.probe = bcm2835_pinctrl_probe,
--
Gitblit v1.6.2