From 244b2c5ca8b14627e4a17755e5922221e121c771 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 09 Oct 2024 06:15:07 +0000
Subject: [PATCH] change system file
---
kernel/drivers/gpu/drm/vc4/vc4_regs.h | 256 ++++++++++++++++++++++++---------------------------
1 files changed, 120 insertions(+), 136 deletions(-)
diff --git a/kernel/drivers/gpu/drm/vc4/vc4_regs.h b/kernel/drivers/gpu/drm/vc4/vc4_regs.h
index d6864fa..a324ef8 100644
--- a/kernel/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/kernel/drivers/gpu/drm/vc4/vc4_regs.h
@@ -1,27 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright © 2014-2015 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef VC4_REGS_H
#define VC4_REGS_H
+#include <linux/bitfield.h>
#include <linux/bitops.h>
#define VC4_MASK(high, low) ((u32)GENMASK(high, low))
/* Using the GNU statement expression extension */
#define VC4_SET_FIELD(value, field) \
({ \
- uint32_t fieldval = (value) << field##_SHIFT; \
- WARN_ON((fieldval & ~field##_MASK) != 0); \
- fieldval & field##_MASK; \
+ WARN_ON(!FIELD_FIT(field##_MASK, value)); \
+ FIELD_PREP(field##_MASK, value); \
})
-#define VC4_GET_FIELD(word, field) (((word) & field##_MASK) >> \
- field##_SHIFT)
+#define VC4_GET_FIELD(word, field) FIELD_GET(field##_MASK, word)
#define V3D_IDENT0 0x00000
# define V3D_EXPECTED_IDENT0 \
@@ -133,6 +129,8 @@
#define V3D_ERRSTAT 0x00f20
#define PV_CONTROL 0x00
+# define PV5_CONTROL_FIFO_LEVEL_HIGH_MASK VC4_MASK(26, 25)
+# define PV5_CONTROL_FIFO_LEVEL_HIGH_SHIFT 25
# define PV_CONTROL_FORMAT_MASK VC4_MASK(23, 21)
# define PV_CONTROL_FORMAT_SHIFT 21
# define PV_CONTROL_FORMAT_24 0
@@ -212,11 +210,22 @@
#define PV_HACT_ACT 0x30
+#define PV_MUX_CFG 0x34
+# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_MASK VC4_MASK(5, 2)
+# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_SHIFT 2
+# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_NO_SWAP 8
+
+#define SCALER_CHANNELS_COUNT 3
+
#define SCALER_DISPCTRL 0x00000000
/* Global register for clock gating the HVS */
# define SCALER_DISPCTRL_ENABLE BIT(31)
-# define SCALER_DISPCTRL_DSP2EISLUR BIT(15)
-# define SCALER_DISPCTRL_DSP1EISLUR BIT(14)
+# define SCALER_DISPCTRL_PANIC0_MASK VC4_MASK(25, 24)
+# define SCALER_DISPCTRL_PANIC0_SHIFT 24
+# define SCALER_DISPCTRL_PANIC1_MASK VC4_MASK(27, 26)
+# define SCALER_DISPCTRL_PANIC1_SHIFT 26
+# define SCALER_DISPCTRL_PANIC2_MASK VC4_MASK(29, 28)
+# define SCALER_DISPCTRL_PANIC2_SHIFT 28
# define SCALER_DISPCTRL_DSP3_MUX_MASK VC4_MASK(19, 18)
# define SCALER_DISPCTRL_DSP3_MUX_SHIFT 18
@@ -224,45 +233,25 @@
* SCALER_DISPSTAT_IRQDISP0. Note that short frame contributions are
* always enabled.
*/
-# define SCALER_DISPCTRL_DSP0EISLUR BIT(13)
-# define SCALER_DISPCTRL_DSP2EIEOLN BIT(12)
-# define SCALER_DISPCTRL_DSP2EIEOF BIT(11)
-# define SCALER_DISPCTRL_DSP1EIEOLN BIT(10)
-# define SCALER_DISPCTRL_DSP1EIEOF BIT(9)
+# define SCALER_DISPCTRL_DSPEISLUR(x) BIT(13 + (x))
/* Enables Display 0 end-of-line-N contribution to
* SCALER_DISPSTAT_IRQDISP0
*/
-# define SCALER_DISPCTRL_DSP0EIEOLN BIT(8)
+# define SCALER_DISPCTRL_DSPEIEOLN(x) BIT(8 + ((x) * 2))
/* Enables Display 0 EOF contribution to SCALER_DISPSTAT_IRQDISP0 */
-# define SCALER_DISPCTRL_DSP0EIEOF BIT(7)
+# define SCALER_DISPCTRL_DSPEIEOF(x) BIT(7 + ((x) * 2))
# define SCALER_DISPCTRL_SLVRDEIRQ BIT(6)
# define SCALER_DISPCTRL_SLVWREIRQ BIT(5)
# define SCALER_DISPCTRL_DMAEIRQ BIT(4)
-# define SCALER_DISPCTRL_DISP2EIRQ BIT(3)
-# define SCALER_DISPCTRL_DISP1EIRQ BIT(2)
/* Enables interrupt generation on the enabled EOF/EOLN/EISLUR
* bits and short frames..
*/
-# define SCALER_DISPCTRL_DISP0EIRQ BIT(1)
+# define SCALER_DISPCTRL_DISPEIRQ(x) BIT(1 + (x))
/* Enables interrupt generation on scaler profiler interrupt. */
# define SCALER_DISPCTRL_SCLEIRQ BIT(0)
#define SCALER_DISPSTAT 0x00000004
-# define SCALER_DISPSTAT_COBLOW2 BIT(29)
-# define SCALER_DISPSTAT_EOLN2 BIT(28)
-# define SCALER_DISPSTAT_ESFRAME2 BIT(27)
-# define SCALER_DISPSTAT_ESLINE2 BIT(26)
-# define SCALER_DISPSTAT_EUFLOW2 BIT(25)
-# define SCALER_DISPSTAT_EOF2 BIT(24)
-
-# define SCALER_DISPSTAT_COBLOW1 BIT(21)
-# define SCALER_DISPSTAT_EOLN1 BIT(20)
-# define SCALER_DISPSTAT_ESFRAME1 BIT(19)
-# define SCALER_DISPSTAT_ESLINE1 BIT(18)
-# define SCALER_DISPSTAT_EUFLOW1 BIT(17)
-# define SCALER_DISPSTAT_EOF1 BIT(16)
-
# define SCALER_DISPSTAT_RESP_MASK VC4_MASK(15, 14)
# define SCALER_DISPSTAT_RESP_SHIFT 14
# define SCALER_DISPSTAT_RESP_OKAY 0
@@ -270,23 +259,26 @@
# define SCALER_DISPSTAT_RESP_SLVERR 2
# define SCALER_DISPSTAT_RESP_DECERR 3
-# define SCALER_DISPSTAT_COBLOW0 BIT(13)
+# define SCALER_DISPSTAT_COBLOW(x) BIT(13 + ((x) * 8))
/* Set when the DISPEOLN line is done compositing. */
-# define SCALER_DISPSTAT_EOLN0 BIT(12)
+# define SCALER_DISPSTAT_EOLN(x) BIT(12 + ((x) * 8))
/* Set when VSTART is seen but there are still pixels in the current
* output line.
*/
-# define SCALER_DISPSTAT_ESFRAME0 BIT(11)
+# define SCALER_DISPSTAT_ESFRAME(x) BIT(11 + ((x) * 8))
/* Set when HSTART is seen but there are still pixels in the current
* output line.
*/
-# define SCALER_DISPSTAT_ESLINE0 BIT(10)
+# define SCALER_DISPSTAT_ESLINE(x) BIT(10 + ((x) * 8))
/* Set when the the downstream tries to read from the display FIFO
* while it's empty.
*/
-# define SCALER_DISPSTAT_EUFLOW0 BIT(9)
+# define SCALER_DISPSTAT_EUFLOW(x) BIT(9 + ((x) * 8))
/* Set when the display mode changes from RUN to EOF */
-# define SCALER_DISPSTAT_EOF0 BIT(8)
+# define SCALER_DISPSTAT_EOF(x) BIT(8 + ((x) * 8))
+
+# define SCALER_DISPSTAT_IRQMASK(x) VC4_MASK(13 + ((x) * 8), \
+ 8 + ((x) * 8))
/* Set on AXI invalid DMA ID error. */
# define SCALER_DISPSTAT_DMA_ERROR BIT(7)
@@ -298,20 +290,28 @@
* SCALER_DISPSTAT_RESP_ERROR is not SCALER_DISPSTAT_RESP_OKAY.
*/
# define SCALER_DISPSTAT_IRQDMA BIT(4)
-# define SCALER_DISPSTAT_IRQDISP2 BIT(3)
-# define SCALER_DISPSTAT_IRQDISP1 BIT(2)
/* Set when any of the EOF/EOLN/ESFRAME/ESLINE bits are set and their
* corresponding interrupt bit is enabled in DISPCTRL.
*/
-# define SCALER_DISPSTAT_IRQDISP0 BIT(1)
+# define SCALER_DISPSTAT_IRQDISP(x) BIT(1 + (x))
/* On read, the profiler interrupt. On write, clear *all* interrupt bits. */
# define SCALER_DISPSTAT_IRQSCL BIT(0)
#define SCALER_DISPID 0x00000008
#define SCALER_DISPECTRL 0x0000000c
+# define SCALER_DISPECTRL_DSP2_MUX_SHIFT 31
+# define SCALER_DISPECTRL_DSP2_MUX_MASK VC4_MASK(31, 31)
+
#define SCALER_DISPPROF 0x00000010
+
#define SCALER_DISPDITHER 0x00000014
+# define SCALER_DISPDITHER_DSP5_MUX_SHIFT 30
+# define SCALER_DISPDITHER_DSP5_MUX_MASK VC4_MASK(31, 30)
+
#define SCALER_DISPEOLN 0x00000018
+# define SCALER_DISPEOLN_DSP4_MUX_SHIFT 30
+# define SCALER_DISPEOLN_DSP4_MUX_MASK VC4_MASK(31, 30)
+
#define SCALER_DISPLIST0 0x00000020
#define SCALER_DISPLIST1 0x00000024
#define SCALER_DISPLIST2 0x00000028
@@ -349,6 +349,20 @@
# define SCALER_DISPCTRLX_WIDTH_SHIFT 12
# define SCALER_DISPCTRLX_HEIGHT_MASK VC4_MASK(11, 0)
# define SCALER_DISPCTRLX_HEIGHT_SHIFT 0
+
+# define SCALER5_DISPCTRLX_WIDTH_MASK VC4_MASK(28, 16)
+# define SCALER5_DISPCTRLX_WIDTH_SHIFT 16
+/* Generates a single frame when VSTART is seen and stops at the last
+ * pixel read from the FIFO.
+ */
+# define SCALER5_DISPCTRLX_ONESHOT BIT(15)
+/* Processes a single context in the dlist and then task switch,
+ * instead of an entire line.
+ */
+# define SCALER5_DISPCTRLX_ONECTX_MASK VC4_MASK(14, 13)
+# define SCALER5_DISPCTRLX_ONECTX_SHIFT 13
+# define SCALER5_DISPCTRLX_HEIGHT_MASK VC4_MASK(12, 0)
+# define SCALER5_DISPCTRLX_HEIGHT_SHIFT 0
#define SCALER_DISPBKGND0 0x00000044
# define SCALER_DISPBKGND_AUTOHS BIT(31)
@@ -483,32 +497,18 @@
#define SCALER_DLIST_START 0x00002000
#define SCALER_DLIST_SIZE 0x00004000
-#define VC4_HDMI_CORE_REV 0x000
+#define SCALER5_DLIST_START 0x00004000
-#define VC4_HDMI_SW_RESET_CONTROL 0x004
# define VC4_HDMI_SW_RESET_FORMAT_DETECT BIT(1)
# define VC4_HDMI_SW_RESET_HDMI BIT(0)
-#define VC4_HDMI_HOTPLUG_INT 0x008
-
-#define VC4_HDMI_HOTPLUG 0x00c
# define VC4_HDMI_HOTPLUG_CONNECTED BIT(0)
-/* 3 bits per field, where each field maps from that corresponding MAI
- * bus channel to the given HDMI channel.
- */
-#define VC4_HDMI_MAI_CHANNEL_MAP 0x090
-
-#define VC4_HDMI_MAI_CONFIG 0x094
# define VC4_HDMI_MAI_CONFIG_FORMAT_REVERSE BIT(27)
# define VC4_HDMI_MAI_CONFIG_BIT_REVERSE BIT(26)
# define VC4_HDMI_MAI_CHANNEL_MASK_MASK VC4_MASK(15, 0)
# define VC4_HDMI_MAI_CHANNEL_MASK_SHIFT 0
-/* Last received format word on the MAI bus. */
-#define VC4_HDMI_MAI_FORMAT 0x098
-
-#define VC4_HDMI_AUDIO_PACKET_CONFIG 0x09c
# define VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_SAMPLE_FLAT BIT(29)
# define VC4_HDMI_AUDIO_PACKET_ZERO_DATA_ON_INACTIVE_CHANNELS BIT(24)
# define VC4_HDMI_AUDIO_PACKET_FORCE_SAMPLE_PRESENT BIT(19)
@@ -522,12 +522,8 @@
# define VC4_HDMI_AUDIO_PACKET_CEA_MASK_MASK VC4_MASK(7, 0)
# define VC4_HDMI_AUDIO_PACKET_CEA_MASK_SHIFT 0
-#define VC4_HDMI_RAM_PACKET_CONFIG 0x0a0
# define VC4_HDMI_RAM_PACKET_ENABLE BIT(16)
-#define VC4_HDMI_RAM_PACKET_STATUS 0x0a4
-
-#define VC4_HDMI_CRP_CFG 0x0a8
/* When set, the CTS_PERIOD counts based on MAI bus sync pulse instead
* of pixel clock.
*/
@@ -541,23 +537,12 @@
# define VC4_HDMI_CRP_CFG_N_MASK VC4_MASK(19, 0)
# define VC4_HDMI_CRP_CFG_N_SHIFT 0
-/* 20-bit fields containing CTS values to be transmitted if !EXTERNAL_CTS_EN */
-#define VC4_HDMI_CTS_0 0x0ac
-#define VC4_HDMI_CTS_1 0x0b0
-/* 20-bit fields containing number of clocks to send CTS0/1 before
- * switching to the other one.
- */
-#define VC4_HDMI_CTS_PERIOD_0 0x0b4
-#define VC4_HDMI_CTS_PERIOD_1 0x0b8
-
-#define VC4_HDMI_HORZA 0x0c4
# define VC4_HDMI_HORZA_VPOS BIT(14)
# define VC4_HDMI_HORZA_HPOS BIT(13)
/* Horizontal active pixels (hdisplay). */
# define VC4_HDMI_HORZA_HAP_MASK VC4_MASK(12, 0)
# define VC4_HDMI_HORZA_HAP_SHIFT 0
-#define VC4_HDMI_HORZB 0x0c8
/* Horizontal pack porch (htotal - hsync_end). */
# define VC4_HDMI_HORZB_HBP_MASK VC4_MASK(29, 20)
# define VC4_HDMI_HORZB_HBP_SHIFT 20
@@ -568,7 +553,6 @@
# define VC4_HDMI_HORZB_HFP_MASK VC4_MASK(9, 0)
# define VC4_HDMI_HORZB_HFP_SHIFT 0
-#define VC4_HDMI_FIFO_CTL 0x05c
# define VC4_HDMI_FIFO_CTL_RECENTER_DONE BIT(14)
# define VC4_HDMI_FIFO_CTL_USE_EMPTY BIT(13)
# define VC4_HDMI_FIFO_CTL_ON_VB BIT(7)
@@ -581,15 +565,12 @@
# define VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N BIT(0)
# define VC4_HDMI_FIFO_VALID_WRITE_MASK 0xefff
-#define VC4_HDMI_SCHEDULER_CONTROL 0x0c0
# define VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT BIT(15)
# define VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS BIT(5)
# define VC4_HDMI_SCHEDULER_CONTROL_VERT_ALWAYS_KEEPOUT BIT(3)
# define VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE BIT(1)
# define VC4_HDMI_SCHEDULER_CONTROL_MODE_HDMI BIT(0)
-#define VC4_HDMI_VERTA0 0x0cc
-#define VC4_HDMI_VERTA1 0x0d4
/* Vertical sync pulse (vsync_end - vsync_start). */
# define VC4_HDMI_VERTA_VSP_MASK VC4_MASK(24, 20)
# define VC4_HDMI_VERTA_VSP_SHIFT 20
@@ -600,8 +581,6 @@
# define VC4_HDMI_VERTA_VAL_MASK VC4_MASK(12, 0)
# define VC4_HDMI_VERTA_VAL_SHIFT 0
-#define VC4_HDMI_VERTB0 0x0d0
-#define VC4_HDMI_VERTB1 0x0d8
/* Vertical sync pulse offset (for interlaced) */
# define VC4_HDMI_VERTB_VSPO_MASK VC4_MASK(21, 9)
# define VC4_HDMI_VERTB_VSPO_SHIFT 9
@@ -609,7 +588,6 @@
# define VC4_HDMI_VERTB_VBP_MASK VC4_MASK(8, 0)
# define VC4_HDMI_VERTB_VBP_SHIFT 0
-#define VC4_HDMI_CEC_CNTRL_1 0x0e8
/* Set when the transmission has ended. */
# define VC4_HDMI_CEC_TX_EOM BIT(31)
/* If set, transmission was acked on the 1st or 2nd attempt (only one
@@ -650,7 +628,6 @@
/* Set these fields to how many bit clock cycles get to that many
* microseconds.
*/
-#define VC4_HDMI_CEC_CNTRL_2 0x0ec
# define VC4_HDMI_CEC_CNT_TO_1500_US_MASK VC4_MASK(30, 24)
# define VC4_HDMI_CEC_CNT_TO_1500_US_SHIFT 24
# define VC4_HDMI_CEC_CNT_TO_1300_US_MASK VC4_MASK(23, 17)
@@ -662,7 +639,6 @@
# define VC4_HDMI_CEC_CNT_TO_400_US_MASK VC4_MASK(4, 0)
# define VC4_HDMI_CEC_CNT_TO_400_US_SHIFT 0
-#define VC4_HDMI_CEC_CNTRL_3 0x0f0
# define VC4_HDMI_CEC_CNT_TO_2750_US_MASK VC4_MASK(31, 24)
# define VC4_HDMI_CEC_CNT_TO_2750_US_SHIFT 24
# define VC4_HDMI_CEC_CNT_TO_2400_US_MASK VC4_MASK(23, 16)
@@ -672,7 +648,6 @@
# define VC4_HDMI_CEC_CNT_TO_1700_US_MASK VC4_MASK(7, 0)
# define VC4_HDMI_CEC_CNT_TO_1700_US_SHIFT 0
-#define VC4_HDMI_CEC_CNTRL_4 0x0f4
# define VC4_HDMI_CEC_CNT_TO_4300_US_MASK VC4_MASK(31, 24)
# define VC4_HDMI_CEC_CNT_TO_4300_US_SHIFT 24
# define VC4_HDMI_CEC_CNT_TO_3900_US_MASK VC4_MASK(23, 16)
@@ -682,7 +657,6 @@
# define VC4_HDMI_CEC_CNT_TO_3500_US_MASK VC4_MASK(7, 0)
# define VC4_HDMI_CEC_CNT_TO_3500_US_SHIFT 0
-#define VC4_HDMI_CEC_CNTRL_5 0x0f8
# define VC4_HDMI_CEC_TX_SW_RESET BIT(27)
# define VC4_HDMI_CEC_RX_SW_RESET BIT(26)
# define VC4_HDMI_CEC_PAD_SW_RESET BIT(25)
@@ -695,39 +669,11 @@
# define VC4_HDMI_CEC_CNT_TO_4500_US_MASK VC4_MASK(7, 0)
# define VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT 0
-/* Transmit data, first byte is low byte of the 32-bit reg. MSB of
- * each byte transmitted first.
- */
-#define VC4_HDMI_CEC_TX_DATA_1 0x0fc
-#define VC4_HDMI_CEC_TX_DATA_2 0x100
-#define VC4_HDMI_CEC_TX_DATA_3 0x104
-#define VC4_HDMI_CEC_TX_DATA_4 0x108
-#define VC4_HDMI_CEC_RX_DATA_1 0x10c
-#define VC4_HDMI_CEC_RX_DATA_2 0x110
-#define VC4_HDMI_CEC_RX_DATA_3 0x114
-#define VC4_HDMI_CEC_RX_DATA_4 0x118
-
-#define VC4_HDMI_TX_PHY_RESET_CTL 0x2c0
-
-#define VC4_HDMI_TX_PHY_CTL0 0x2c4
# define VC4_HDMI_TX_PHY_RNG_PWRDN BIT(25)
-/* Interrupt status bits */
-#define VC4_HDMI_CPU_STATUS 0x340
-#define VC4_HDMI_CPU_SET 0x344
-#define VC4_HDMI_CPU_CLEAR 0x348
# define VC4_HDMI_CPU_CEC BIT(6)
# define VC4_HDMI_CPU_HOTPLUG BIT(0)
-#define VC4_HDMI_CPU_MASK_STATUS 0x34c
-#define VC4_HDMI_CPU_MASK_SET 0x350
-#define VC4_HDMI_CPU_MASK_CLEAR 0x354
-
-#define VC4_HDMI_GCP(x) (0x400 + ((x) * 0x4))
-#define VC4_HDMI_RAM_PACKET(x) (0x400 + ((x) * 0x24))
-#define VC4_HDMI_PACKET_STRIDE 0x24
-
-#define VC4_HD_M_CTL 0x00c
/* Debug: Current receive value on the CEC pad. */
# define VC4_HD_CECRXD BIT(9)
/* Debug: Override CEC output to 0. */
@@ -737,7 +683,6 @@
# define VC4_HD_M_SW_RST BIT(2)
# define VC4_HD_M_ENABLE BIT(0)
-#define VC4_HD_MAI_CTL 0x014
/* Set when audio stream is received at a slower rate than the
* sampling period, so MAI fifo goes empty. Write 1 to clear.
*/
@@ -762,7 +707,6 @@
/* Single-shot reset bit. Read value is undefined. */
# define VC4_HD_MAI_CTL_RESET BIT(0)
-#define VC4_HD_MAI_THR 0x018
# define VC4_HD_MAI_THR_PANICHIGH_MASK VC4_MASK(29, 24)
# define VC4_HD_MAI_THR_PANICHIGH_SHIFT 24
# define VC4_HD_MAI_THR_PANICLOW_MASK VC4_MASK(21, 16)
@@ -772,31 +716,23 @@
# define VC4_HD_MAI_THR_DREQLOW_MASK VC4_MASK(5, 0)
# define VC4_HD_MAI_THR_DREQLOW_SHIFT 0
-/* Format header to be placed on the MAI data. Unused. */
-#define VC4_HD_MAI_FMT 0x01c
-
-/* Register for DMAing in audio data to be transported over the MAI
- * bus to the Falcon core.
- */
-#define VC4_HD_MAI_DATA 0x020
-
/* Divider from HDMI HSM clock to MAI serial clock. Sampling period
* converges to N / (M + 1) cycles.
*/
-#define VC4_HD_MAI_SMP 0x02c
# define VC4_HD_MAI_SMP_N_MASK VC4_MASK(31, 8)
# define VC4_HD_MAI_SMP_N_SHIFT 8
# define VC4_HD_MAI_SMP_M_MASK VC4_MASK(7, 0)
# define VC4_HD_MAI_SMP_M_SHIFT 0
-#define VC4_HD_VID_CTL 0x038
# define VC4_HD_VID_CTL_ENABLE BIT(31)
# define VC4_HD_VID_CTL_UNDERFLOW_ENABLE BIT(30)
# define VC4_HD_VID_CTL_FRAME_COUNTER_RESET BIT(29)
# define VC4_HD_VID_CTL_VSYNC_LOW BIT(28)
# define VC4_HD_VID_CTL_HSYNC_LOW BIT(27)
+# define VC4_HD_VID_CTL_CLRSYNC BIT(24)
+# define VC4_HD_VID_CTL_CLRRGB BIT(23)
+# define VC4_HD_VID_CTL_BLANKPIX BIT(18)
-#define VC4_HD_CSC_CTL 0x040
# define VC4_HD_CSC_CTL_ORDER_MASK VC4_MASK(7, 5)
# define VC4_HD_CSC_CTL_ORDER_SHIFT 5
# define VC4_HD_CSC_CTL_ORDER_RGB 0
@@ -814,14 +750,7 @@
# define VC4_HD_CSC_CTL_RGB2YCC BIT(1)
# define VC4_HD_CSC_CTL_ENABLE BIT(0)
-#define VC4_HD_CSC_12_11 0x044
-#define VC4_HD_CSC_14_13 0x048
-#define VC4_HD_CSC_22_21 0x04c
-#define VC4_HD_CSC_24_23 0x050
-#define VC4_HD_CSC_32_31 0x054
-#define VC4_HD_CSC_34_33 0x058
-
-#define VC4_HD_FRAME_COUNT 0x068
+# define VC4_DVP_HT_CLOCK_STOP_PIXEL BIT(1)
/* HVS display list information. */
#define HVS_BOOTLOADER_DLIST_END 32
@@ -848,6 +777,8 @@
HVS_PIXEL_FORMAT_PALETTE = 13,
HVS_PIXEL_FORMAT_YUV444_RGB = 14,
HVS_PIXEL_FORMAT_AYUV444_RGB = 15,
+ HVS_PIXEL_FORMAT_RGBA1010102 = 16,
+ HVS_PIXEL_FORMAT_YCBCR_10BIT = 17,
};
/* Note: the LSB is the rightmost character shown. Only valid for
@@ -902,6 +833,10 @@
#define SCALER_CTL0_RGBA_EXPAND_MSB 2
#define SCALER_CTL0_RGBA_EXPAND_ROUND 3
+#define SCALER5_CTL0_ALPHA_EXPAND BIT(12)
+
+#define SCALER5_CTL0_RGB_EXPAND BIT(11)
+
#define SCALER_CTL0_SCL1_MASK VC4_MASK(10, 8)
#define SCALER_CTL0_SCL1_SHIFT 8
@@ -919,9 +854,12 @@
/* Set to indicate no scaling. */
#define SCALER_CTL0_UNITY BIT(4)
+#define SCALER5_CTL0_UNITY BIT(15)
#define SCALER_CTL0_PIXEL_FORMAT_MASK VC4_MASK(3, 0)
#define SCALER_CTL0_PIXEL_FORMAT_SHIFT 0
+
+#define SCALER5_CTL0_PIXEL_FORMAT_MASK VC4_MASK(4, 0)
#define SCALER_POS0_FIXED_ALPHA_MASK VC4_MASK(31, 24)
#define SCALER_POS0_FIXED_ALPHA_SHIFT 24
@@ -932,11 +870,47 @@
#define SCALER_POS0_START_X_MASK VC4_MASK(11, 0)
#define SCALER_POS0_START_X_SHIFT 0
+#define SCALER5_POS0_START_Y_MASK VC4_MASK(27, 16)
+#define SCALER5_POS0_START_Y_SHIFT 16
+
+#define SCALER5_POS0_START_X_MASK VC4_MASK(13, 0)
+#define SCALER5_POS0_START_X_SHIFT 0
+
+#define SCALER5_POS0_VFLIP BIT(31)
+#define SCALER5_POS0_HFLIP BIT(15)
+
+#define SCALER5_CTL2_ALPHA_MODE_MASK VC4_MASK(31, 30)
+#define SCALER5_CTL2_ALPHA_MODE_SHIFT 30
+#define SCALER5_CTL2_ALPHA_MODE_PIPELINE 0
+#define SCALER5_CTL2_ALPHA_MODE_FIXED 1
+#define SCALER5_CTL2_ALPHA_MODE_FIXED_NONZERO 2
+#define SCALER5_CTL2_ALPHA_MODE_FIXED_OVER_0x07 3
+
+#define SCALER5_CTL2_ALPHA_PREMULT BIT(29)
+
+#define SCALER5_CTL2_ALPHA_MIX BIT(28)
+
+#define SCALER5_CTL2_ALPHA_LOC BIT(25)
+
+#define SCALER5_CTL2_MAP_SEL_MASK VC4_MASK(18, 17)
+#define SCALER5_CTL2_MAP_SEL_SHIFT 17
+
+#define SCALER5_CTL2_GAMMA BIT(16)
+
+#define SCALER5_CTL2_ALPHA_MASK VC4_MASK(15, 4)
+#define SCALER5_CTL2_ALPHA_SHIFT 4
+
#define SCALER_POS1_SCL_HEIGHT_MASK VC4_MASK(27, 16)
#define SCALER_POS1_SCL_HEIGHT_SHIFT 16
#define SCALER_POS1_SCL_WIDTH_MASK VC4_MASK(11, 0)
#define SCALER_POS1_SCL_WIDTH_SHIFT 0
+
+#define SCALER5_POS1_SCL_HEIGHT_MASK VC4_MASK(28, 16)
+#define SCALER5_POS1_SCL_HEIGHT_SHIFT 16
+
+#define SCALER5_POS1_SCL_WIDTH_MASK VC4_MASK(12, 0)
+#define SCALER5_POS1_SCL_WIDTH_SHIFT 0
#define SCALER_POS2_ALPHA_MODE_MASK VC4_MASK(31, 30)
#define SCALER_POS2_ALPHA_MODE_SHIFT 30
@@ -952,6 +926,12 @@
#define SCALER_POS2_WIDTH_MASK VC4_MASK(11, 0)
#define SCALER_POS2_WIDTH_SHIFT 0
+
+#define SCALER5_POS2_HEIGHT_MASK VC4_MASK(28, 16)
+#define SCALER5_POS2_HEIGHT_SHIFT 16
+
+#define SCALER5_POS2_WIDTH_MASK VC4_MASK(12, 0)
+#define SCALER5_POS2_WIDTH_SHIFT 0
/* Color Space Conversion words. Some values are S2.8 signed
* integers, except that the 2 integer bits map as {0x0: 0, 0x1: 1,
@@ -1037,14 +1017,18 @@
#define SCALER_TILE_HEIGHT_MASK VC4_MASK(15, 0)
#define SCALER_TILE_HEIGHT_SHIFT 0
+/* Common PITCH0 fields */
+#define SCALER_PITCH0_SINK_PIX_MASK VC4_MASK(31, 26)
+#define SCALER_PITCH0_SINK_PIX_SHIFT 26
+
/* PITCH0 fields for T-tiled. */
#define SCALER_PITCH0_TILE_WIDTH_L_MASK VC4_MASK(22, 16)
#define SCALER_PITCH0_TILE_WIDTH_L_SHIFT 16
#define SCALER_PITCH0_TILE_LINE_DIR BIT(15)
#define SCALER_PITCH0_TILE_INITIAL_LINE_DIR BIT(14)
/* Y offset within a tile. */
-#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 7)
-#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 7
+#define SCALER_PITCH0_TILE_Y_OFFSET_MASK VC4_MASK(13, 8)
+#define SCALER_PITCH0_TILE_Y_OFFSET_SHIFT 8
#define SCALER_PITCH0_TILE_WIDTH_R_MASK VC4_MASK(6, 0)
#define SCALER_PITCH0_TILE_WIDTH_R_SHIFT 0
--
Gitblit v1.6.2