From 244b2c5ca8b14627e4a17755e5922221e121c771 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 09 Oct 2024 06:15:07 +0000
Subject: [PATCH] change system file
---
kernel/Documentation/trace/kprobetrace.rst | 80 ++++++++++++++++++++++++++++++++++++----
1 files changed, 72 insertions(+), 8 deletions(-)
diff --git a/kernel/Documentation/trace/kprobetrace.rst b/kernel/Documentation/trace/kprobetrace.rst
index 8bfc75c..b175d88 100644
--- a/kernel/Documentation/trace/kprobetrace.rst
+++ b/kernel/Documentation/trace/kprobetrace.rst
@@ -20,6 +20,9 @@
/sys/kernel/debug/tracing/kprobe_events, and enable it via
/sys/kernel/debug/tracing/events/kprobes/<EVENT>/enable.
+You can also use /sys/kernel/debug/tracing/dynamic_events instead of
+kprobe_events. That interface will provide unified access to other
+dynamic events too.
Synopsis of kprobe_events
-------------------------
@@ -27,6 +30,7 @@
p[:[GRP/]EVENT] [MOD:]SYM[+offs]|MEMADDR [FETCHARGS] : Set a probe
r[MAXACTIVE][:[GRP/]EVENT] [MOD:]SYM[+0] [FETCHARGS] : Set a return probe
+ p:[GRP/]EVENT] [MOD:]SYM[+0]%return [FETCHARGS] : Set a return probe
-:[GRP/]EVENT : Clear a probe
GRP : Group name. If omitted, use "kprobes" for it.
@@ -34,10 +38,11 @@
based on SYM+offs or MEMADDR.
MOD : Module name which has given SYM.
SYM[+offs] : Symbol+offset where the probe is inserted.
+ SYM%return : Return address of the symbol
MEMADDR : Address where the probe is inserted.
MAXACTIVE : Maximum number of instances of the specified function that
can be probed simultaneously, or 0 for the default value
- as defined in Documentation/kprobes.txt section 1.3.1.
+ as defined in Documentation/trace/kprobes.rst section 1.3.1.
FETCHARGS : Arguments. Each probe can have up to 128 args.
%REG : Fetch register REG
@@ -45,16 +50,21 @@
@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
$stackN : Fetch Nth entry of stack (N >= 0)
$stack : Fetch stack address.
- $retval : Fetch return value.(*)
+ $argN : Fetch the Nth function argument. (N >= 1) (\*1)
+ $retval : Fetch return value.(\*2)
$comm : Fetch current task comm.
- +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
+ +|-[u]OFFS(FETCHARG) : Fetch memory at FETCHARG +|- OFFS address.(\*3)(\*4)
+ \IMM : Store an immediate value to the argument.
NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
(u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
- (x8/x16/x32/x64), "string" and bitfield are supported.
+ (x8/x16/x32/x64), "string", "ustring" and bitfield
+ are supported.
- (*) only for return probe.
- (**) this is useful for fetching a field of data structures.
+ (\*1) only for the probe on function entry (offs == 0).
+ (\*2) only for return probe.
+ (\*3) this is useful for fetching a field of data structures.
+ (\*4) "u" means user-space dereference. See :ref:`user_mem_access`.
Types
-----
@@ -64,16 +74,50 @@
in decimal ('s' and 'u') or hexadecimal ('x'). Without type casting, 'x32'
or 'x64' is used depends on the architecture (e.g. x86-32 uses x32, and
x86-64 uses x64).
+These value types can be an array. To record array data, you can add '[N]'
+(where N is a fixed number, less than 64) to the base type.
+E.g. 'x16[4]' means an array of x16 (2bytes hex) with 4 elements.
+Note that the array can be applied to memory type fetchargs, you can not
+apply it to registers/stack-entries etc. (for example, '$stack1:x8[8]' is
+wrong, but '+8($stack):x8[8]' is OK.)
String type is a special type, which fetches a "null-terminated" string from
kernel space. This means it will fail and store NULL if the string container
-has been paged out.
+has been paged out. "ustring" type is an alternative of string for user-space.
+See :ref:`user_mem_access` for more info..
+The string array type is a bit different from other types. For other base
+types, <base-type>[1] is equal to <base-type> (e.g. +0(%di):x32[1] is same
+as +0(%di):x32.) But string[1] is not equal to string. The string type itself
+represents "char array", but string array type represents "char * array".
+So, for example, +0(%di):string[1] is equal to +0(+0(%di)):string.
Bitfield is another special type, which takes 3 parameters, bit-width, bit-
offset, and container-size (usually 32). The syntax is::
b<bit-width>@<bit-offset>/<container-size>
+Symbol type('symbol') is an alias of u32 or u64 type (depends on BITS_PER_LONG)
+which shows given pointer in "symbol+offset" style.
For $comm, the default type is "string"; any other type is invalid.
+.. _user_mem_access:
+
+User Memory Access
+------------------
+Kprobe events supports user-space memory access. For that purpose, you can use
+either user-space dereference syntax or 'ustring' type.
+
+The user-space dereference syntax allows you to access a field of a data
+structure in user-space. This is done by adding the "u" prefix to the
+dereference syntax. For example, +u4(%si) means it will read memory from the
+address in the register %si offset by 4, and the memory is expected to be in
+user-space. You can use this for strings too, e.g. +u0(%si):string will read
+a string from the address in the register %si that is expected to be in user-
+space. 'ustring' is a shortcut way of performing the same task. That is,
++0(%si):ustring is equivalent to +u0(%si):string.
+
+Note that kprobe-event provides the user-memory access syntax but it doesn't
+use it transparently. This means if you use normal dereference or string type
+for user memory, it might fail, and may always fail on some archs. The user
+has to carefully check if the target data is in kernel or user space.
Per-Probe Event Filtering
-------------------------
@@ -105,6 +149,20 @@
/sys/kernel/debug/tracing/kprobe_profile.
The first column is event name, the second is the number of probe hits,
the third is the number of probe miss-hits.
+
+Kernel Boot Parameter
+---------------------
+You can add and enable new kprobe events when booting up the kernel by
+"kprobe_event=" parameter. The parameter accepts a semicolon-delimited
+kprobe events, which format is similar to the kprobe_events.
+The difference is that the probe definition parameters are comma-delimited
+instead of space. For example, adding myprobe event on do_sys_open like below
+
+ p:myprobe do_sys_open dfd=%ax filename=%dx flags=%cx mode=+4($stack)
+
+should be below for kernel boot parameter (just replace spaces with comma)
+
+ p:myprobe,do_sys_open,dfd=%ax,filename=%dx,flags=%cx,mode=+4($stack)
Usage examples
@@ -171,6 +229,13 @@
echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
echo 1 > /sys/kernel/debug/tracing/events/kprobes/myretprobe/enable
+Use the following command to start tracing in an interval.
+::
+
+ # echo 1 > tracing_on
+ Open something...
+ # echo 0 > tracing_on
+
And you can see the traced information via /sys/kernel/debug/tracing/trace.
::
@@ -190,4 +255,3 @@
Each line shows when the kernel hits an event, and <- SYMBOL means kernel
returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
returns from do_sys_open to sys_open+0x1b).
-
--
Gitblit v1.6.2