From 244b2c5ca8b14627e4a17755e5922221e121c771 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 09 Oct 2024 06:15:07 +0000
Subject: [PATCH] change system file
---
kernel/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt | 30 +++++++++++++++++++++++++-----
1 files changed, 25 insertions(+), 5 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/kernel/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
index b99d25f..ff3eafc 100644
--- a/kernel/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
+++ b/kernel/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
@@ -15,12 +15,15 @@
Array of strings.
one of:
- "nvidia,tegra186-hsp"
+ - "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"
- reg : Offset and length of the register set for the device.
- interrupt-names
Array of strings.
Contains a list of names for the interrupts described by the interrupt
property. May contain the following entries, in any order:
- "doorbell"
+ - "sharedN", where 'N' is a number from zero up to the number of
+ external interrupts supported by the HSP instance minus one.
Users of this binding MUST look up entries in the interrupt property
by name, using this interrupt-names property to do so.
- interrupts
@@ -29,12 +32,29 @@
in a matching order.
- #mbox-cells : Should be 2.
-The mbox specifier of the "mboxes" property in the client node should
-contain two data. The first one should be the HSP type and the second
-one should be the ID that the client is going to use. Those information
-can be found in the following file.
+The mbox specifier of the "mboxes" property in the client node should contain
+two cells. The first cell determines the HSP type and the second cell is used
+to identify the mailbox that the client is going to use.
-- <dt-bindings/mailbox/tegra186-hsp.h>.
+For doorbells, the second cell specifies the index of the doorbell to use.
+
+For shared mailboxes, the second cell is composed of two fields:
+- bits 31..24:
+ A bit mask of flags that further specify how the shared mailbox will be
+ used. Valid flags are:
+ - bit 31:
+ Defines the direction of the mailbox. If set, the mailbox will be used
+ as a producer (i.e. used to send data). If cleared, the mailbox is the
+ consumer of data sent by a producer.
+
+- bits 23.. 0:
+ The index of the shared mailbox to use. The number of available mailboxes
+ may vary by instance of the HSP block and SoC generation.
+
+The following file contains definitions that can be used to construct mailbox
+specifiers:
+
+ <dt-bindings/mailbox/tegra186-hsp.h>
Example:
--
Gitblit v1.6.2