From 23fa18eaa71266feff7ba8d83022d9e1cc83c65a Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:42:03 +0000
Subject: [PATCH] disable pwm7
---
kernel/drivers/usb/serial/ftdi_sio.c | 569 +++++++++++++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 510 insertions(+), 59 deletions(-)
diff --git a/kernel/drivers/usb/serial/ftdi_sio.c b/kernel/drivers/usb/serial/ftdi_sio.c
index d966836..3bfa395 100644
--- a/kernel/drivers/usb/serial/ftdi_sio.c
+++ b/kernel/drivers/usb/serial/ftdi_sio.c
@@ -10,7 +10,7 @@
* Copyright (C) 2002
* Kuba Ober (kuba@mareimbrium.org)
*
- * See Documentation/usb/usb-serial.txt for more information on using this
+ * See Documentation/usb/usb-serial.rst for more information on using this
* driver
*
* See http://ftdi-usb-sio.sourceforge.net for up to date testing info
@@ -39,6 +39,7 @@
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
+#include <linux/gpio/driver.h>
#include <linux/usb/serial.h>
#include "ftdi_sio.h"
#include "ftdi_sio_ids.h"
@@ -72,6 +73,15 @@
unsigned int latency; /* latency setting in use */
unsigned short max_packet_size;
struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gc;
+ struct mutex gpio_lock; /* protects GPIO state */
+ bool gpio_registered; /* is the gpiochip in kernel registered */
+ bool gpio_used; /* true if the user requested a gpio */
+ u8 gpio_altfunc; /* which pins are in gpio mode */
+ u8 gpio_output; /* pin directions cache */
+ u8 gpio_value; /* pin value for outputs */
+#endif
};
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -1013,6 +1023,9 @@
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) },
{ USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) },
+ /* Belimo Automation devices */
+ { USB_DEVICE(FTDI_VID, BELIMO_ZTH_PID) },
+ { USB_DEVICE(FTDI_VID, BELIMO_ZIP_PID) },
/* ICP DAS I-756xU devices */
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) },
{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
@@ -1032,6 +1045,8 @@
/* IDS GmbH devices */
{ USB_DEVICE(IDS_VID, IDS_SI31A_PID) },
{ USB_DEVICE(IDS_VID, IDS_CM31A_PID) },
+ /* Omron devices */
+ { USB_DEVICE(OMRON_VID, OMRON_CS1W_CIF31_PID) },
/* U-Blox devices */
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) },
{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
@@ -1080,6 +1095,10 @@
unsigned int set, unsigned int clear);
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
+static int get_serial_info(struct tty_struct *tty,
+ struct serial_struct *ss);
+static int set_serial_info(struct tty_struct *tty,
+ struct serial_struct *ss);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
static bool ftdi_tx_empty(struct usb_serial_port *port);
static int ftdi_get_modem_status(struct usb_serial_port *port,
@@ -1116,6 +1135,8 @@
.tiocmiwait = usb_serial_generic_tiocmiwait,
.get_icount = usb_serial_generic_get_icount,
.ioctl = ftdi_ioctl,
+ .get_serial = get_serial_info,
+ .set_serial = set_serial_info,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.tx_empty = ftdi_tx_empty,
@@ -1139,7 +1160,7 @@
{
unsigned short int divisor;
/* divisor shifted 3 bits to the left */
- int divisor3 = base / 2 / baud;
+ int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud);
if ((divisor3 & 0x7) == 7)
divisor3++; /* round x.7/8 up to x+1 */
divisor = divisor3 >> 3;
@@ -1165,7 +1186,7 @@
static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
u32 divisor;
/* divisor shifted 3 bits to the left */
- int divisor3 = base / 2 / baud;
+ int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud);
divisor = divisor3 >> 3;
divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
/* Deal with special cases for highest baud rates. */
@@ -1188,7 +1209,7 @@
int divisor3;
/* hi-speed baud rate is 10-bit sampling instead of 16-bit */
- divisor3 = base * 8 / (baud * 10);
+ divisor3 = DIV_ROUND_CLOSEST(8 * base, 10 * baud);
divisor = divisor3 >> 3;
divisor |= (u32)divfrac[divisor3 & 0x7] << 14;
@@ -1299,8 +1320,7 @@
case 38400: div_value = ftdi_sio_b38400; break;
case 57600: div_value = ftdi_sio_b57600; break;
case 115200: div_value = ftdi_sio_b115200; break;
- } /* baud */
- if (div_value == 0) {
+ default:
dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n",
__func__, baud);
div_value = ftdi_sio_b9600;
@@ -1469,30 +1489,24 @@
return 0;
}
-static int get_serial_info(struct usb_serial_port *port,
- struct serial_struct __user *retinfo)
+static int get_serial_info(struct tty_struct *tty,
+ struct serial_struct *ss)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct serial_struct tmp;
- memset(&tmp, 0, sizeof(tmp));
- tmp.flags = priv->flags;
- tmp.baud_base = priv->baud_base;
- tmp.custom_divisor = priv->custom_divisor;
- if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
- return -EFAULT;
+ ss->flags = priv->flags;
+ ss->baud_base = priv->baud_base;
+ ss->custom_divisor = priv->custom_divisor;
return 0;
}
static int set_serial_info(struct tty_struct *tty,
- struct usb_serial_port *port, struct serial_struct __user *newinfo)
+ struct serial_struct *ss)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct serial_struct new_serial;
struct ftdi_private old_priv;
-
- if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
- return -EFAULT;
mutex_lock(&priv->cfg_lock);
old_priv = *priv;
@@ -1500,17 +1514,17 @@
/* Do error checking and permission checking */
if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.flags ^ priv->flags) & ~ASYNC_USR_MASK) {
+ if ((ss->flags ^ priv->flags) & ~ASYNC_USR_MASK) {
mutex_unlock(&priv->cfg_lock);
return -EPERM;
}
priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- priv->custom_divisor = new_serial.custom_divisor;
+ (ss->flags & ASYNC_USR_MASK));
+ priv->custom_divisor = ss->custom_divisor;
goto check_and_exit;
}
- if (new_serial.baud_base != priv->baud_base) {
+ if (ss->baud_base != priv->baud_base) {
mutex_unlock(&priv->cfg_lock);
return -EINVAL;
}
@@ -1518,8 +1532,8 @@
/* Make the changes - these are privileged changes! */
priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- priv->custom_divisor = new_serial.custom_divisor;
+ (ss->flags & ASYNC_FLAGS));
+ priv->custom_divisor = ss->custom_divisor;
check_and_exit:
write_latency_timer(port);
@@ -1533,10 +1547,8 @@
dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n");
change_speed(tty, port);
- mutex_unlock(&priv->cfg_lock);
}
- else
- mutex_unlock(&priv->cfg_lock);
+ mutex_unlock(&priv->cfg_lock);
return 0;
}
@@ -1572,7 +1584,8 @@
dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__,
version, interfaces);
if (interfaces > 1) {
- int inter;
+ struct usb_interface *intf = serial->interface;
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
/* Multiple interfaces.*/
if (version == 0x0800) {
@@ -1587,16 +1600,15 @@
priv->chip_type = FT2232C;
/* Determine interface code. */
- inter = serial->interface->altsetting->desc.bInterfaceNumber;
- if (inter == 0) {
+ if (ifnum == 0)
priv->interface = INTERFACE_A;
- } else if (inter == 1) {
+ else if (ifnum == 1)
priv->interface = INTERFACE_B;
- } else if (inter == 2) {
+ else if (ifnum == 2)
priv->interface = INTERFACE_C;
- } else if (inter == 3) {
+ else if (ifnum == 3)
priv->interface = INTERFACE_D;
- }
+
/* BM-type devices have a bug where bcdDevice gets set
* to 0x200 when iSerialNumber is 0. */
if (version < 0x500) {
@@ -1792,6 +1804,431 @@
}
+#ifdef CONFIG_GPIOLIB
+
+static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ int result;
+ u16 val;
+
+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
+ val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value;
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ FTDI_SIO_SET_BITMODE_REQUEST,
+ FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val,
+ priv->interface, NULL, 0, WDR_TIMEOUT);
+ if (result < 0) {
+ dev_err(&serial->interface->dev,
+ "bitmode request failed for value 0x%04x: %d\n",
+ val, result);
+ }
+
+ usb_autopm_put_interface(serial->interface);
+
+ return result;
+}
+
+static int ftdi_set_cbus_pins(struct usb_serial_port *port)
+{
+ return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_CBUS);
+}
+
+static int ftdi_exit_cbus_mode(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ priv->gpio_output = 0;
+ priv->gpio_value = 0;
+ return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_RESET);
+}
+
+static int ftdi_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int result;
+
+ if (priv->gpio_altfunc & BIT(offset))
+ return -ENODEV;
+
+ mutex_lock(&priv->gpio_lock);
+ if (!priv->gpio_used) {
+ /* Set default pin states, as we cannot get them from device */
+ priv->gpio_output = 0x00;
+ priv->gpio_value = 0x00;
+ result = ftdi_set_cbus_pins(port);
+ if (result) {
+ mutex_unlock(&priv->gpio_lock);
+ return result;
+ }
+
+ priv->gpio_used = true;
+ }
+ mutex_unlock(&priv->gpio_lock);
+
+ return 0;
+}
+
+static int ftdi_read_cbus_pins(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ unsigned char *buf;
+ int result;
+
+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ usb_autopm_put_interface(serial->interface);
+ return -ENOMEM;
+ }
+
+ result = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ FTDI_SIO_READ_PINS_REQUEST,
+ FTDI_SIO_READ_PINS_REQUEST_TYPE, 0,
+ priv->interface, buf, 1, WDR_TIMEOUT);
+ if (result < 1) {
+ if (result >= 0)
+ result = -EIO;
+ } else {
+ result = buf[0];
+ }
+
+ kfree(buf);
+ usb_autopm_put_interface(serial->interface);
+
+ return result;
+}
+
+static int ftdi_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ int result;
+
+ result = ftdi_read_cbus_pins(port);
+ if (result < 0)
+ return result;
+
+ return !!(result & BIT(gpio));
+}
+
+static void ftdi_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&priv->gpio_lock);
+
+ if (value)
+ priv->gpio_value |= BIT(gpio);
+ else
+ priv->gpio_value &= ~BIT(gpio);
+
+ ftdi_set_cbus_pins(port);
+
+ mutex_unlock(&priv->gpio_lock);
+}
+
+static int ftdi_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ int result;
+
+ result = ftdi_read_cbus_pins(port);
+ if (result < 0)
+ return result;
+
+ *bits = result & *mask;
+
+ return 0;
+}
+
+static void ftdi_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ mutex_lock(&priv->gpio_lock);
+
+ priv->gpio_value &= ~(*mask);
+ priv->gpio_value |= *bits & *mask;
+ ftdi_set_cbus_pins(port);
+
+ mutex_unlock(&priv->gpio_lock);
+}
+
+static int ftdi_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ return !(priv->gpio_output & BIT(gpio));
+}
+
+static int ftdi_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int result;
+
+ mutex_lock(&priv->gpio_lock);
+
+ priv->gpio_output &= ~BIT(gpio);
+ result = ftdi_set_cbus_pins(port);
+
+ mutex_unlock(&priv->gpio_lock);
+
+ return result;
+}
+
+static int ftdi_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
+ int value)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int result;
+
+ mutex_lock(&priv->gpio_lock);
+
+ priv->gpio_output |= BIT(gpio);
+ if (value)
+ priv->gpio_value |= BIT(gpio);
+ else
+ priv->gpio_value &= ~BIT(gpio);
+
+ result = ftdi_set_cbus_pins(port);
+
+ mutex_unlock(&priv->gpio_lock);
+
+ return result;
+}
+
+static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr,
+ u16 nbytes)
+{
+ int read = 0;
+
+ if (addr % 2 != 0)
+ return -EINVAL;
+ if (nbytes % 2 != 0)
+ return -EINVAL;
+
+ /* Read EEPROM two bytes at a time */
+ while (read < nbytes) {
+ int rv;
+
+ rv = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ FTDI_SIO_READ_EEPROM_REQUEST,
+ FTDI_SIO_READ_EEPROM_REQUEST_TYPE,
+ 0, (addr + read) / 2, dst + read, 2,
+ WDR_TIMEOUT);
+ if (rv < 2) {
+ if (rv >= 0)
+ return -EIO;
+ else
+ return rv;
+ }
+
+ read += rv;
+ }
+
+ return 0;
+}
+
+static int ftdi_gpio_init_ft232h(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ u16 cbus_config;
+ u8 *buf;
+ int ret;
+ int i;
+
+ buf = kmalloc(4, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = ftdi_read_eeprom(port->serial, buf, 0x1a, 4);
+ if (ret < 0)
+ goto out_free;
+
+ /*
+ * FT232H CBUS Memory Map
+ *
+ * 0x1a: X- (upper nibble -> AC5)
+ * 0x1b: -X (lower nibble -> AC6)
+ * 0x1c: XX (upper nibble -> AC9 | lower nibble -> AC8)
+ */
+ cbus_config = buf[2] << 8 | (buf[1] & 0xf) << 4 | (buf[0] & 0xf0) >> 4;
+
+ priv->gc.ngpio = 4;
+ priv->gpio_altfunc = 0xff;
+
+ for (i = 0; i < priv->gc.ngpio; ++i) {
+ if ((cbus_config & 0xf) == FTDI_FTX_CBUS_MUX_GPIO)
+ priv->gpio_altfunc &= ~BIT(i);
+ cbus_config >>= 4;
+ }
+
+out_free:
+ kfree(buf);
+
+ return ret;
+}
+
+static int ftdi_gpio_init_ft232r(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ u16 cbus_config;
+ u8 *buf;
+ int ret;
+ int i;
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = ftdi_read_eeprom(port->serial, buf, 0x14, 2);
+ if (ret < 0)
+ goto out_free;
+
+ cbus_config = le16_to_cpup((__le16 *)buf);
+ dev_dbg(&port->dev, "cbus_config = 0x%04x\n", cbus_config);
+
+ priv->gc.ngpio = 4;
+
+ priv->gpio_altfunc = 0xff;
+ for (i = 0; i < priv->gc.ngpio; ++i) {
+ if ((cbus_config & 0xf) == FTDI_FT232R_CBUS_MUX_GPIO)
+ priv->gpio_altfunc &= ~BIT(i);
+ cbus_config >>= 4;
+ }
+out_free:
+ kfree(buf);
+
+ return ret;
+}
+
+static int ftdi_gpio_init_ftx(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ const u16 cbus_cfg_addr = 0x1a;
+ const u16 cbus_cfg_size = 4;
+ u8 *cbus_cfg_buf;
+ int result;
+ u8 i;
+
+ cbus_cfg_buf = kmalloc(cbus_cfg_size, GFP_KERNEL);
+ if (!cbus_cfg_buf)
+ return -ENOMEM;
+
+ result = ftdi_read_eeprom(serial, cbus_cfg_buf,
+ cbus_cfg_addr, cbus_cfg_size);
+ if (result < 0)
+ goto out_free;
+
+ /* FIXME: FT234XD alone has 1 GPIO, but how to recognize this IC? */
+ priv->gc.ngpio = 4;
+
+ /* Determine which pins are configured for CBUS bitbanging */
+ priv->gpio_altfunc = 0xff;
+ for (i = 0; i < priv->gc.ngpio; ++i) {
+ if (cbus_cfg_buf[i] == FTDI_FTX_CBUS_MUX_GPIO)
+ priv->gpio_altfunc &= ~BIT(i);
+ }
+
+out_free:
+ kfree(cbus_cfg_buf);
+
+ return result;
+}
+
+static int ftdi_gpio_init(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ int result;
+
+ switch (priv->chip_type) {
+ case FT232H:
+ result = ftdi_gpio_init_ft232h(port);
+ break;
+ case FT232RL:
+ result = ftdi_gpio_init_ft232r(port);
+ break;
+ case FTX:
+ result = ftdi_gpio_init_ftx(port);
+ break;
+ default:
+ return 0;
+ }
+
+ if (result < 0)
+ return result;
+
+ mutex_init(&priv->gpio_lock);
+
+ priv->gc.label = "ftdi-cbus";
+ priv->gc.request = ftdi_gpio_request;
+ priv->gc.get_direction = ftdi_gpio_direction_get;
+ priv->gc.direction_input = ftdi_gpio_direction_input;
+ priv->gc.direction_output = ftdi_gpio_direction_output;
+ priv->gc.get = ftdi_gpio_get;
+ priv->gc.set = ftdi_gpio_set;
+ priv->gc.get_multiple = ftdi_gpio_get_multiple;
+ priv->gc.set_multiple = ftdi_gpio_set_multiple;
+ priv->gc.owner = THIS_MODULE;
+ priv->gc.parent = &serial->interface->dev;
+ priv->gc.base = -1;
+ priv->gc.can_sleep = true;
+
+ result = gpiochip_add_data(&priv->gc, port);
+ if (!result)
+ priv->gpio_registered = true;
+
+ return result;
+}
+
+static void ftdi_gpio_remove(struct usb_serial_port *port)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ if (priv->gpio_registered) {
+ gpiochip_remove(&priv->gc);
+ priv->gpio_registered = false;
+ }
+
+ if (priv->gpio_used) {
+ /* Exiting CBUS-mode does not reset pin states. */
+ ftdi_exit_cbus_mode(port);
+ priv->gpio_used = false;
+ }
+}
+
+#else
+
+static int ftdi_gpio_init(struct usb_serial_port *port)
+{
+ return 0;
+}
+
+static void ftdi_gpio_remove(struct usb_serial_port *port) { }
+
+#endif /* CONFIG_GPIOLIB */
+
/*
* ***************************************************************************
* FTDI driver specific functions
@@ -1820,7 +2257,7 @@
{
struct ftdi_private *priv;
const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
-
+ int result;
priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
if (!priv)
@@ -1839,6 +2276,14 @@
priv->latency = 16;
write_latency_timer(port);
create_sysfs_attrs(port);
+
+ result = ftdi_gpio_init(port);
+ if (result < 0) {
+ dev_err(&port->serial->interface->dev,
+ "GPIO initialisation failed: %d\n",
+ result);
+ }
+
return 0;
}
@@ -1903,12 +2348,11 @@
*/
static int ftdi_jtag_probe(struct usb_serial *serial)
{
- struct usb_device *udev = serial->dev;
- struct usb_interface *interface = serial->interface;
+ struct usb_interface *intf = serial->interface;
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
- if (interface == udev->actconfig->interface[0]) {
- dev_info(&udev->dev,
- "Ignoring serial port reserved for JTAG\n");
+ if (ifnum == 0) {
+ dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n");
return -ENODEV;
}
@@ -1940,12 +2384,11 @@
*/
static int ftdi_stmclite_probe(struct usb_serial *serial)
{
- struct usb_device *udev = serial->dev;
- struct usb_interface *interface = serial->interface;
+ struct usb_interface *intf = serial->interface;
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
- if (interface == udev->actconfig->interface[0] ||
- interface == udev->actconfig->interface[1]) {
- dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+ if (ifnum < 2) {
+ dev_info(&intf->dev, "Ignoring interface reserved for JTAG\n");
return -ENODEV;
}
@@ -1955,6 +2398,8 @@
static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
+
+ ftdi_gpio_remove(port);
remove_sysfs_attrs(port);
@@ -2055,6 +2500,7 @@
struct ftdi_private *priv, unsigned char *buf, int len)
{
unsigned char status;
+ bool brkint = false;
int i;
char flag;
@@ -2106,13 +2552,17 @@
*/
flag = TTY_NORMAL;
if (buf[1] & FTDI_RS_ERR_MASK) {
- /* Break takes precedence over parity, which takes precedence
- * over framing errors */
- if (buf[1] & FTDI_RS_BI) {
- flag = TTY_BREAK;
+ /*
+ * Break takes precedence over parity, which takes precedence
+ * over framing errors. Note that break is only associated
+ * with the last character in the buffer and only when it's a
+ * NUL.
+ */
+ if (buf[1] & FTDI_RS_BI && buf[len - 1] == '\0') {
port->icount.brk++;
- usb_serial_handle_break(port);
- } else if (buf[1] & FTDI_RS_PE) {
+ brkint = true;
+ }
+ if (buf[1] & FTDI_RS_PE) {
flag = TTY_PARITY;
port->icount.parity++;
} else if (buf[1] & FTDI_RS_FE) {
@@ -2128,8 +2578,13 @@
port->icount.rx += len - 2;
- if (port->port.console && port->sysrq) {
+ if (brkint || port->sysrq) {
for (i = 2; i < len; i++) {
+ if (brkint && i == len - 1) {
+ if (usb_serial_handle_break(port))
+ return len - 3;
+ flag = TTY_BREAK;
+ }
if (usb_serial_handle_sysrq_char(port, buf[i]))
continue;
tty_insert_flip_char(&port->port, buf[i], flag);
@@ -2146,7 +2601,7 @@
{
struct usb_serial_port *port = urb->context;
struct ftdi_private *priv = usb_get_serial_port_data(port);
- char *data = (char *)urb->transfer_buffer;
+ char *data = urb->transfer_buffer;
int i;
int len;
int count = 0;
@@ -2477,10 +2932,6 @@
void __user *argp = (void __user *)arg;
switch (cmd) {
- case TIOCGSERIAL:
- return get_serial_info(port, argp);
- case TIOCSSERIAL:
- return set_serial_info(tty, port, argp);
case TIOCSERGETLSR:
return get_lsr_info(port, argp);
default:
--
Gitblit v1.6.2