From 23fa18eaa71266feff7ba8d83022d9e1cc83c65a Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:42:03 +0000
Subject: [PATCH] disable pwm7
---
kernel/drivers/staging/rtl8188eu/hal/rf.c | 80 +++++++++++++++++----------------------
1 files changed, 35 insertions(+), 45 deletions(-)
diff --git a/kernel/drivers/staging/rtl8188eu/hal/rf.c b/kernel/drivers/staging/rtl8188eu/hal/rf.c
index 81e30a1..aab0f54 100644
--- a/kernel/drivers/staging/rtl8188eu/hal/rf.c
+++ b/kernel/drivers/staging/rtl8188eu/hal/rf.c
@@ -49,9 +49,9 @@
tx_agc[RF_PATH_B] = 0x3f3f3f3f;
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
tx_agc[idx1] = powerlevel[idx1] |
- (powerlevel[idx1]<<8) |
- (powerlevel[idx1]<<16) |
- (powerlevel[idx1]<<24);
+ (powerlevel[idx1] << 8) |
+ (powerlevel[idx1] << 16) |
+ (powerlevel[idx1] << 24);
}
} else {
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
@@ -63,23 +63,23 @@
} else {
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
tx_agc[idx1] = powerlevel[idx1] |
- (powerlevel[idx1]<<8) |
- (powerlevel[idx1]<<16) |
- (powerlevel[idx1]<<24);
+ (powerlevel[idx1] << 8) |
+ (powerlevel[idx1] << 16) |
+ (powerlevel[idx1] << 24);
}
if (hal_data->EEPROMRegulatory == 0) {
tmpval = hal_data->MCSTxPowerLevelOriginalOffset[0][6] +
- (hal_data->MCSTxPowerLevelOriginalOffset[0][7]<<8);
+ (hal_data->MCSTxPowerLevelOriginalOffset[0][7] << 8);
tx_agc[RF_PATH_A] += tmpval;
tmpval = hal_data->MCSTxPowerLevelOriginalOffset[0][14] +
- (hal_data->MCSTxPowerLevelOriginalOffset[0][15]<<24);
+ (hal_data->MCSTxPowerLevelOriginalOffset[0][15] << 24);
tx_agc[RF_PATH_B] += tmpval;
}
}
}
for (idx1 = RF_PATH_A; idx1 <= RF_PATH_B; idx1++) {
- ptr = (u8 *)(&(tx_agc[idx1]));
+ ptr = (u8 *)(&tx_agc[idx1]);
for (idx2 = 0; idx2 < 4; idx2++) {
if (*ptr > RF6052_MAX_TX_PWR)
*ptr = RF6052_MAX_TX_PWR;
@@ -100,15 +100,15 @@
}
/* rf-A cck tx power */
- tmpval = tx_agc[RF_PATH_A]&0xff;
+ tmpval = tx_agc[RF_PATH_A] & 0xff;
phy_set_bb_reg(adapt, rTxAGC_A_CCK1_Mcs32, bMaskByte1, tmpval);
- tmpval = tx_agc[RF_PATH_A]>>8;
+ tmpval = tx_agc[RF_PATH_A] >> 8;
phy_set_bb_reg(adapt, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
/* rf-B cck tx power */
- tmpval = tx_agc[RF_PATH_B]>>24;
+ tmpval = tx_agc[RF_PATH_B] >> 24;
phy_set_bb_reg(adapt, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, tmpval);
- tmpval = tx_agc[RF_PATH_B]&0x00ffffff;
+ tmpval = tx_agc[RF_PATH_B] & 0x00ffffff;
phy_set_bb_reg(adapt, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
}
@@ -124,9 +124,9 @@
for (i = 0; i < 2; i++) {
powerbase0 = pwr_level_ofdm[i];
- powerbase0 = (powerbase0<<24) | (powerbase0<<16) |
- (powerbase0<<8) | powerbase0;
- *(ofdmbase+i) = powerbase0;
+ powerbase0 = (powerbase0 << 24) | (powerbase0 << 16) |
+ (powerbase0 << 8) | powerbase0;
+ *(ofdmbase + i) = powerbase0;
}
/* Check HT20 to HT40 diff */
if (adapt->HalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
@@ -134,10 +134,11 @@
else
powerlevel[0] = pwr_level_bw40[0];
powerbase1 = powerlevel[0];
- powerbase1 = (powerbase1<<24) | (powerbase1<<16) |
- (powerbase1<<8) | powerbase1;
+ powerbase1 = (powerbase1 << 24) | (powerbase1 << 16) |
+ (powerbase1 << 8) | powerbase1;
*mcs_base = powerbase1;
}
+
static void get_rx_power_val_by_reg(struct adapter *adapt, u8 channel,
u8 index, u32 *powerbase0, u32 *powerbase1,
u32 *out_val)
@@ -157,28 +158,17 @@
switch (regulatory) {
case 0:
chnlGroup = 0;
- write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index + (rf ? 8 : 0)] +
((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
case 1: /* Realtek regulatory */
/* increase power diff defined by Realtek for regulatory */
if (hal_data->pwrGroupCnt == 1)
chnlGroup = 0;
- if (hal_data->pwrGroupCnt >= hal_data->PGMaxGroup) {
- if (channel < 3)
- chnlGroup = 0;
- else if (channel < 6)
- chnlGroup = 1;
- else if (channel < 9)
- chnlGroup = 2;
- else if (channel < 12)
- chnlGroup = 3;
- else if (channel < 14)
- chnlGroup = 4;
- else if (channel == 14)
- chnlGroup = 5;
- }
- write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index+(rf ? 8 : 0)] +
+ if (hal_data->pwrGroupCnt >= hal_data->PGMaxGroup)
+ Hal_GetChnlGroup88E(channel, &chnlGroup);
+
+ write_val = hal_data->MCSTxPowerLevelOriginalOffset[chnlGroup][index + (rf ? 8 : 0)] +
((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
case 2: /* Better regulatory */
@@ -190,14 +180,14 @@
chnlGroup = 0;
if (index < 2)
- pwr_diff = hal_data->TxPwrLegacyHtDiff[rf][channel-1];
+ pwr_diff = hal_data->TxPwrLegacyHtDiff[rf][channel - 1];
else if (hal_data->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
- pwr_diff = hal_data->TxPwrHt20Diff[rf][channel-1];
+ pwr_diff = hal_data->TxPwrHt20Diff[rf][channel - 1];
if (hal_data->CurrentChannelBW == HT_CHANNEL_WIDTH_40)
- customer_pwr_limit = hal_data->PwrGroupHT40[rf][channel-1];
+ customer_pwr_limit = hal_data->PwrGroupHT40[rf][channel - 1];
else
- customer_pwr_limit = hal_data->PwrGroupHT20[rf][channel-1];
+ customer_pwr_limit = hal_data->PwrGroupHT20[rf][channel - 1];
if (pwr_diff >= customer_pwr_limit)
pwr_diff = 0;
@@ -211,9 +201,9 @@
if (pwr_diff_limit[i] > pwr_diff)
pwr_diff_limit[i] = pwr_diff;
}
- customer_limit = (pwr_diff_limit[3]<<24) |
- (pwr_diff_limit[2]<<16) |
- (pwr_diff_limit[1]<<8) |
+ customer_limit = (pwr_diff_limit[3] << 24) |
+ (pwr_diff_limit[2] << 16) |
+ (pwr_diff_limit[1] << 8) |
(pwr_diff_limit[0]);
write_val = customer_limit + ((index < 2) ? powerbase0[rf] : powerbase1[rf]);
break;
@@ -232,7 +222,7 @@
else if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level2)
write_val = 0x00000000;
- *(out_val+rf) = write_val;
+ *(out_val + rf) = write_val;
}
}
@@ -251,12 +241,12 @@
for (rf = 0; rf < 2; rf++) {
write_val = pvalue[rf];
for (i = 0; i < 4; i++) {
- pwr_val[i] = (u8)((write_val & (0x7f<<(i*8)))>>(i*8));
+ pwr_val[i] = (u8)((write_val & (0x7f << (i * 8))) >> (i * 8));
if (pwr_val[i] > RF6052_MAX_TX_PWR)
pwr_val[i] = RF6052_MAX_TX_PWR;
}
- write_val = (pwr_val[3]<<24) | (pwr_val[2]<<16) |
- (pwr_val[1]<<8) | pwr_val[0];
+ write_val = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+ (pwr_val[1] << 8) | pwr_val[0];
if (rf == 0)
regoffset = regoffset_a[index];
--
Gitblit v1.6.2