From 23fa18eaa71266feff7ba8d83022d9e1cc83c65a Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:42:03 +0000
Subject: [PATCH] disable pwm7
---
kernel/drivers/iio/common/st_sensors/st_sensors_spi.c | 182 ++++++++++++++++++++++----------------------
1 files changed, 91 insertions(+), 91 deletions(-)
diff --git a/kernel/drivers/iio/common/st_sensors/st_sensors_spi.c b/kernel/drivers/iio/common/st_sensors/st_sensors_spi.c
index 5b37737..48fc41d 100644
--- a/kernel/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/kernel/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -1,119 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* STMicroelectronics sensors spi library driver
*
* Copyright 2012-2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
- *
- * Licensed under the GPL-2.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/iio/iio.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
#include <linux/iio/common/st_sensors_spi.h>
-
+#include "st_sensors_core.h"
#define ST_SENSORS_SPI_MULTIREAD 0xc0
-#define ST_SENSORS_SPI_READ 0x80
-static unsigned int st_sensors_spi_get_irq(struct iio_dev *indio_dev)
-{
- struct st_sensor_data *sdata = iio_priv(indio_dev);
-
- return to_spi_device(sdata->dev)->irq;
-}
-
-static int st_sensors_spi_read(struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, int len, u8 *data, bool multiread_bit)
-{
- int err;
-
- struct spi_transfer xfers[] = {
- {
- .tx_buf = tb->tx_buf,
- .bits_per_word = 8,
- .len = 1,
- },
- {
- .rx_buf = tb->rx_buf,
- .bits_per_word = 8,
- .len = len,
- }
- };
-
- mutex_lock(&tb->buf_lock);
- if ((multiread_bit) && (len > 1))
- tb->tx_buf[0] = reg_addr | ST_SENSORS_SPI_MULTIREAD;
- else
- tb->tx_buf[0] = reg_addr | ST_SENSORS_SPI_READ;
-
- err = spi_sync_transfer(to_spi_device(dev), xfers, ARRAY_SIZE(xfers));
- if (err)
- goto acc_spi_read_error;
-
- memcpy(data, tb->rx_buf, len);
- mutex_unlock(&tb->buf_lock);
- return len;
-
-acc_spi_read_error:
- mutex_unlock(&tb->buf_lock);
- return err;
-}
-
-static int st_sensors_spi_read_byte(struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, u8 *res_byte)
-{
- return st_sensors_spi_read(tb, dev, reg_addr, 1, res_byte, false);
-}
-
-static int st_sensors_spi_read_multiple_byte(
- struct st_sensor_transfer_buffer *tb, struct device *dev,
- u8 reg_addr, int len, u8 *data, bool multiread_bit)
-{
- return st_sensors_spi_read(tb, dev, reg_addr, len, data, multiread_bit);
-}
-
-static int st_sensors_spi_write_byte(struct st_sensor_transfer_buffer *tb,
- struct device *dev, u8 reg_addr, u8 data)
-{
- int err;
-
- struct spi_transfer xfers = {
- .tx_buf = tb->tx_buf,
- .bits_per_word = 8,
- .len = 2,
- };
-
- mutex_lock(&tb->buf_lock);
- tb->tx_buf[0] = reg_addr;
- tb->tx_buf[1] = data;
-
- err = spi_sync_transfer(to_spi_device(dev), &xfers, 1);
- mutex_unlock(&tb->buf_lock);
-
- return err;
-}
-
-static const struct st_sensor_transfer_function st_sensors_tf_spi = {
- .read_byte = st_sensors_spi_read_byte,
- .write_byte = st_sensors_spi_write_byte,
- .read_multiple_byte = st_sensors_spi_read_multiple_byte,
+static const struct regmap_config st_sensors_spi_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
};
-void st_sensors_spi_configure(struct iio_dev *indio_dev,
- struct spi_device *spi, struct st_sensor_data *sdata)
+static const struct regmap_config st_sensors_spi_regmap_multiread_bit_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .read_flag_mask = ST_SENSORS_SPI_MULTIREAD,
+};
+
+/*
+ * st_sensors_is_spi_3_wire() - check if SPI 3-wire mode has been selected
+ * @spi: spi device reference.
+ *
+ * Return: true if SPI 3-wire mode is selected, false otherwise.
+ */
+static bool st_sensors_is_spi_3_wire(struct spi_device *spi)
{
+ struct st_sensors_platform_data *pdata;
+ struct device *dev = &spi->dev;
+
+ if (device_property_read_bool(dev, "spi-3wire"))
+ return true;
+
+ pdata = dev_get_platdata(dev);
+ if (pdata && pdata->spi_3wire)
+ return true;
+
+ return false;
+}
+
+/*
+ * st_sensors_configure_spi_3_wire() - configure SPI 3-wire if needed
+ * @spi: spi device reference.
+ * @settings: sensor specific settings reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+static int st_sensors_configure_spi_3_wire(struct spi_device *spi,
+ struct st_sensor_settings *settings)
+{
+ if (settings->sim.addr) {
+ u8 buffer[] = {
+ settings->sim.addr,
+ settings->sim.value
+ };
+
+ return spi_write(spi, buffer, 2);
+ }
+
+ return 0;
+}
+
+/*
+ * st_sensors_spi_configure() - configure SPI interface
+ * @indio_dev: IIO device reference.
+ * @spi: spi device reference.
+ *
+ * Return: 0 on success, else a negative error code.
+ */
+int st_sensors_spi_configure(struct iio_dev *indio_dev,
+ struct spi_device *spi)
+{
+ struct st_sensor_data *sdata = iio_priv(indio_dev);
+ const struct regmap_config *config;
+ int err;
+
+ if (st_sensors_is_spi_3_wire(spi)) {
+ err = st_sensors_configure_spi_3_wire(spi,
+ sdata->sensor_settings);
+ if (err < 0)
+ return err;
+ }
+
+ if (sdata->sensor_settings->multi_read_bit)
+ config = &st_sensors_spi_regmap_multiread_bit_config;
+ else
+ config = &st_sensors_spi_regmap_config;
+
+ sdata->regmap = devm_regmap_init_spi(spi, config);
+ if (IS_ERR(sdata->regmap)) {
+ dev_err(&spi->dev, "Failed to register spi regmap (%ld)\n",
+ PTR_ERR(sdata->regmap));
+ return PTR_ERR(sdata->regmap);
+ }
+
spi_set_drvdata(spi, indio_dev);
- indio_dev->dev.parent = &spi->dev;
indio_dev->name = spi->modalias;
sdata->dev = &spi->dev;
- sdata->tf = &st_sensors_tf_spi;
- sdata->get_irq_data_ready = st_sensors_spi_get_irq;
+ sdata->irq = spi->irq;
+
+ return 0;
}
EXPORT_SYMBOL(st_sensors_spi_configure);
--
Gitblit v1.6.2