From 23fa18eaa71266feff7ba8d83022d9e1cc83c65a Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:42:03 +0000
Subject: [PATCH] disable pwm7
---
kernel/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 380 +++++++++++++++++++++++++++++++++--------------------
1 files changed, 237 insertions(+), 143 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/kernel/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 68af663..a9caaf7 100644
--- a/kernel/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/kernel/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -5,16 +5,30 @@
model = "NVIDIA Tegra210 P2597 I/O board";
compatible = "nvidia,p2597", "nvidia,tegra210";
+ aliases {
+ ethernet = "/usb@70090000/ethernet@1";
+ };
+
host1x@50000000 {
dpaux@54040000 {
status = "okay";
};
+ vi@54080000 {
+ status = "okay";
+
+ avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+
+ csi@838 {
+ status = "okay";
+ };
+ };
+
sor@54580000 {
status = "okay";
- avdd-io-supply = <&avdd_1v05>;
- vdd-pll-supply = <&vdd_1v8>;
+ avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+ vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
hdmi-supply = <&vdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
@@ -1278,6 +1292,20 @@
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
};
+
+ dvfs_pwm_active_state: dvfs_pwm_active {
+ dvfs_pwm_pbb1 {
+ nvidia,pins = "dvfs_pwm_pbb1";
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+
+ dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+ dvfs_pwm_pbb1 {
+ nvidia,pins = "dvfs_pwm_pbb1";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ };
};
pwm@7000a000 {
@@ -1295,12 +1323,30 @@
#gpio-cells = <2>;
gpio-controller;
};
+
+ exp2: gpio@77 {
+ compatible = "ti,tca9539";
+ reg = <0x77>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
};
/* HDMI DDC */
hdmi_ddc: i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
+ };
+
+ sata@70020000 {
+ status = "okay";
+ phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+ };
+
+ hda@70030000 {
+ nvidia,model = "jetson-tx1-hda";
+ status = "okay";
};
usb@70090000 {
@@ -1312,7 +1358,6 @@
<&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
"usb3-1";
-
dvddio-pex-supply = <&vdd_pex_1v05>;
hvddio-pex-supply = <&vdd_1v8>;
avdd-usb-supply = <&vdd_3v3_sys>;
@@ -1323,22 +1368,29 @@
hvdd-usb-ss-pll-e-supply = <&vdd_1v8>;
status = "okay";
- };
- sata@70020000 {
- status = "okay";
- phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@1 {
+ reg = <1>;
+ };
};
padctl@7009f000 {
status = "okay";
+
+ avdd-pll-utmip-supply = <&vdd_1v8>;
+ avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+ dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+ hvdd-pex-pll-e-supply = <&vdd_1v8>;
pads {
usb2 {
status = "okay";
lanes {
- usb2-0 {
+ micro_b: usb2-0 {
nvidia,function = "xusb";
status = "okay";
};
@@ -1416,7 +1468,19 @@
ports {
usb2-0 {
status = "okay";
+ vbus-supply = <&vdd_usb_vbus_otg>;
+ usb-role-switch;
mode = "otg";
+
+ connector {
+ compatible = "gpio-usb-b-connector",
+ "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ vbus-gpios = <&gpio TEGRA_GPIO(Z, 0)
+ GPIO_ACTIVE_LOW>;
+ id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+ };
};
usb2-1 {
@@ -1449,10 +1513,9 @@
};
/* MMC/SD */
- sdhci@700b0000 {
+ mmc@700b0000 {
status = "okay";
bus-width = <4>;
- no-1-8-v;
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
@@ -1460,139 +1523,12 @@
vmmc-supply = <&vdd_3v3_sd>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_sys_mux: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "VDD_SYS_MUX";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_5v0_sys: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "VDD_5V0_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_sys_mux>;
- };
-
- vdd_3v3_sys: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "VDD_3V3_SYS";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_sys_mux>;
-
- regulator-enable-ramp-delay = <160>;
- regulator-disable-ramp-delay = <10000>;
- };
-
- vdd_5v0_io: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "VDD_5V0_IO_SYS";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_3v3_sd: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "VDD_3V3_SD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
-
- regulator-enable-ramp-delay = <472>;
- regulator-disable-ramp-delay = <4880>;
- };
-
- vdd_dsi_csi: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- regulator-name = "AVDD_DSI_CSI_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- vin-supply = <&vdd_sys_1v2>;
- };
-
- vdd_3v3_dis: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- regulator-name = "VDD_DIS_3V3_LCD";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_3v3_sys>;
- };
-
- vdd_1v8_dis: regulator@7 {
- compatible = "regulator-fixed";
- reg = <7>;
- regulator-name = "VDD_LCD_1V8_DIS";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_1v8>;
- };
-
- vdd_5v0_rtl: regulator@8 {
- compatible = "regulator-fixed";
- reg = <8>;
- regulator-name = "RTL_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_usb_vbus: regulator@9 {
- compatible = "regulator-fixed";
- reg = <9>;
- regulator-name = "USB_VBUS_EN1";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
-
- vdd_hdmi: regulator@10 {
- compatible = "regulator-fixed";
- reg = <10>;
- regulator-name = "VDD_HDMI_5V0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&vdd_5v0_sys>;
- };
+ usb@700d0000 {
+ status = "okay";
+ phys = <µ_b>;
+ phy-names = "usb2-0";
+ avddio-usb-supply = <&vdd_3v3_sys>;
+ hvdd-usb-supply = <&vdd_1v8>;
};
gpio-keys {
@@ -1618,4 +1554,162 @@
linux,code = <KEY_VOLUMEUP>;
};
};
+
+ vdd_sys_mux: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_SYS_MUX";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_5v0_sys: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V0_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_sys_mux>;
+ };
+
+ vdd_3v3_sys: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_SYS";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_sys_mux>;
+
+ regulator-enable-ramp-delay = <160>;
+ regulator-disable-ramp-delay = <10000>;
+ };
+
+ vdd_5v0_io: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_5V0_IO_SYS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3_sd: regulator@4 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+
+ regulator-enable-ramp-delay = <472>;
+ regulator-disable-ramp-delay = <4880>;
+ };
+
+ vdd_dsi_csi: regulator@5 {
+ compatible = "regulator-fixed";
+ regulator-name = "AVDD_DSI_CSI_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <&vdd_sys_1v2>;
+ };
+
+ vdd_3v3_dis: regulator@6 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_DIS_3V3_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_1v8_dis: regulator@7 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_LCD_1V8_DIS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_1v8>;
+ };
+
+ vdd_5v0_rtl: regulator@8 {
+ compatible = "regulator-fixed";
+ regulator-name = "RTL_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_usb_vbus: regulator@9 {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_VBUS_EN1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_hdmi: regulator@10 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_HDMI_5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
+
+ vdd_cam_1v2: regulator@11 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cam-1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&exp2 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_cam_2v8: regulator@12 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cam-2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&exp1 13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_cam_1v8: regulator@13 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cam-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&exp2 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_3v3_sys>;
+ };
+
+ vdd_usb_vbus_otg: regulator@14 {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_VBUS_EN0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <&vdd_5v0_sys>;
+ };
};
--
Gitblit v1.6.2