From 23fa18eaa71266feff7ba8d83022d9e1cc83c65a Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:42:03 +0000
Subject: [PATCH] disable pwm7
---
kernel/arch/arm64/boot/dts/actions/s700.dtsi | 102 +++++++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 98 insertions(+), 4 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/actions/s700.dtsi b/kernel/arch/arm64/boot/dts/actions/s700.dtsi
index 66dd530..2c78cae 100644
--- a/kernel/arch/arm64/boot/dts/actions/s700.dtsi
+++ b/kernel/arch/arm64/boot/dts/actions/s700.dtsi
@@ -3,7 +3,10 @@
* Copyright (c) 2017 Andreas Färber
*/
+#include <dt-bindings/clock/actions,s700-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s700-powergate.h>
+#include <dt-bindings/reset/actions,s700-reset.h>
/ {
compatible = "actions,s700";
@@ -17,28 +20,28 @@
cpu0: cpu@0 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
};
cpu1: cpu@1 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
};
cpu2: cpu@2 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
};
@@ -87,6 +90,12 @@
#clock-cells = <0>;
};
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -107,6 +116,7 @@
uart0: serial@e0120000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0120000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART0>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -114,6 +124,7 @@
uart1: serial@e0122000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0122000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART1>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -121,6 +132,7 @@
uart2: serial@e0124000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0124000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART2>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -128,6 +140,7 @@
uart3: serial@e0126000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0126000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART3>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -135,6 +148,7 @@
uart4: serial@e0128000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0128000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART4>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -142,6 +156,7 @@
uart5: serial@e012a000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012a000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART5>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -149,7 +164,56 @@
uart6: serial@e012c000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012c000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART6>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ cmu: clock-controller@e0168000 {
+ compatible = "actions,s700-cmu";
+ reg = <0x0 0xe0168000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ i2c0: i2c@e0170000 {
+ compatible = "actions,s700-i2c";
+ reg = <0 0xe0170000 0 0x1000>;
+ clocks = <&cmu CLK_I2C0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e0174000 {
+ compatible = "actions,s700-i2c";
+ reg = <0 0xe0174000 0 0x1000>;
+ clocks = <&cmu CLK_I2C1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e0178000 {
+ compatible = "actions,s700-i2c";
+ reg = <0 0xe0178000 0 0x1000>;
+ clocks = <&cmu CLK_I2C2>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e017c000 {
+ compatible = "actions,s700-i2c";
+ reg = <0 0xe017c000 0 0x1000>;
+ clocks = <&cmu CLK_I2C3>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};
@@ -165,5 +229,35 @@
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "timer1";
};
+
+ pinctrl: pinctrl@e01b0000 {
+ compatible = "actions,s700-pinctrl";
+ reg = <0x0 0xe01b0000 0x0 0x100>;
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 136>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dma: dma-controller@e0230000 {
+ compatible = "actions,s700-dma";
+ reg = <0x0 0xe0230000 0x0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <10>;
+ dma-requests = <44>;
+ clocks = <&cmu CLK_DMAC>;
+ power-domains = <&sps S700_PD_DMA>;
+ };
};
};
--
Gitblit v1.6.2