From 23fa18eaa71266feff7ba8d83022d9e1cc83c65a Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:42:03 +0000
Subject: [PATCH] disable pwm7

---
 kernel/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts |   74 +++++-------------------------------
 1 files changed, 11 insertions(+), 63 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/kernel/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index f5c7178..2e328d2 100644
--- a/kernel/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/kernel/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -74,8 +74,6 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_orangepi>;
 
 		green {
 			label = "orangepi:green:usr";
@@ -90,8 +88,6 @@
 
 	reg_gmac_3v3: gmac-3v3 {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_orangepi>;
 		regulator-name = "gmac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -123,15 +119,11 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
-	phy = <&phy1>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
 };
 
 &hdmi {
@@ -145,8 +137,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -160,13 +150,17 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@@ -174,8 +168,6 @@
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
@@ -184,46 +176,6 @@
 
 &otg_sram {
 	status = "okay";
-};
-
-&pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		pins = "PH4";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
-		pins = "PH10";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
-		pins = "PH11";
-		function = "gpio_in";
-		bias-pull-up;
-	};
-
-	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
-		pins = "PH22";
-		function = "gpio_out";
-	};
-
-	gmac_power_pin_orangepi: gmac_power_pin@0 {
-		pins = "PH23";
-		function = "gpio_out";
-	};
-
-	led_pins_orangepi: led_pins@0 {
-		pins = "PH24", "PH25";
-		function = "gpio_out";
-	};
-
-	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
-		pins = "PH26";
-		function = "gpio_out";
-	};
 };
 
 &reg_dcdc2 {
@@ -256,20 +208,18 @@
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
 	status = "okay";
 };
 
 &reg_usb2_vbus {
-	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
 	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
@@ -283,9 +233,7 @@
 };
 
 &usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>;
-	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;

--
Gitblit v1.6.2