From 223293205a7265c8b02882461ba8996650048ade Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 11 Dec 2023 06:33:33 +0000
Subject: [PATCH] audio ok
---
kernel/drivers/net/ethernet/intel/e1000e/netdev.c | 606 +++++++++++++++++++++++++++++++++++++++++-------------
1 files changed, 454 insertions(+), 152 deletions(-)
diff --git a/kernel/drivers/net/ethernet/intel/e1000e/netdev.c b/kernel/drivers/net/ethernet/intel/e1000e/netdev.c
index 398f595..ae0c9aa 100644
--- a/kernel/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/kernel/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -28,11 +28,7 @@
#include "e1000.h"
-#define DRV_EXTRAVERSION "-k"
-
-#define DRV_VERSION "3.2.6" DRV_EXTRAVERSION
char e1000e_driver_name[] = "e1000e";
-const char e1000e_driver_version[] = DRV_VERSION;
#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
static int debug = -1;
@@ -54,6 +50,7 @@
[board_pch_lpt] = &e1000_pch_lpt_info,
[board_pch_spt] = &e1000_pch_spt_info,
[board_pch_cnp] = &e1000_pch_cnp_info,
+ [board_pch_tgp] = &e1000_pch_tgp_info,
};
struct e1000_reg_info {
@@ -466,6 +463,7 @@
/**
* e1000_desc_unused - calculate if we have unused descriptors
+ * @ring: pointer to ring struct to perform calculation on
**/
static int e1000_desc_unused(struct e1000_ring *ring)
{
@@ -542,6 +540,7 @@
/**
* e1000_receive_skb - helper function to handle Rx indications
* @adapter: board private structure
+ * @netdev: pointer to netdev struct
* @staterr: descriptor extended error and status field as written by hardware
* @vlan: descriptor vlan field as written by hardware (no le/be conversion)
* @skb: pointer to sk_buff to be indicated to stack
@@ -566,8 +565,7 @@
* e1000_rx_checksum - Receive Checksum Offload
* @adapter: board private structure
* @status_err: receive descriptor status and error fields
- * @csum: receive descriptor csum field
- * @sk_buff: socket buffer with received data
+ * @skb: socket buffer with received data
**/
static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
struct sk_buff *skb)
@@ -638,6 +636,8 @@
/**
* e1000_alloc_rx_buffers - Replace used receive buffers
* @rx_ring: Rx descriptor ring
+ * @cleaned_count: number to reallocate
+ * @gfp: flags for allocation
**/
static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring,
int cleaned_count, gfp_t gfp)
@@ -706,6 +706,8 @@
/**
* e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
* @rx_ring: Rx descriptor ring
+ * @cleaned_count: number to reallocate
+ * @gfp: flags for allocation
**/
static void e1000_alloc_rx_buffers_ps(struct e1000_ring *rx_ring,
int cleaned_count, gfp_t gfp)
@@ -809,6 +811,7 @@
* e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
* @rx_ring: Rx descriptor ring
* @cleaned_count: number of buffers to allocate this pass
+ * @gfp: flags for allocation
**/
static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring,
@@ -898,6 +901,8 @@
/**
* e1000_clean_rx_irq - Send received data up the network stack
* @rx_ring: Rx descriptor ring
+ * @work_done: output parameter for indicating completed work
+ * @work_to_do: how many packets we can clean
*
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
@@ -1292,6 +1297,8 @@
/**
* e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
* @rx_ring: Rx descriptor ring
+ * @work_done: output parameter for indicating completed work
+ * @work_to_do: how many packets we can clean
*
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
@@ -1482,9 +1489,6 @@
return cleaned;
}
-/**
- * e1000_consume_page - helper function
- **/
static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
u16 length)
{
@@ -1496,7 +1500,9 @@
/**
* e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
- * @adapter: board private structure
+ * @rx_ring: Rx descriptor ring
+ * @work_done: output parameter for indicating completed work
+ * @work_to_do: how many packets we can clean
*
* the return value indicates whether actual cleaning was done, there
* is no guarantee that everything was cleaned
@@ -1959,6 +1965,7 @@
/**
* e1000_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure
*
* e1000_configure_msix sets up the hardware to properly
* generate MSI-X interrupts.
@@ -2037,6 +2044,7 @@
/**
* e1000e_set_interrupt_capability - set MSI or MSI-X if supported
+ * @adapter: board private structure
*
* Attempt to configure interrupts using the best available
* capabilities of the hardware and kernel.
@@ -2072,7 +2080,7 @@
e1000e_reset_interrupt_capability(adapter);
}
adapter->int_mode = E1000E_INT_MODE_MSI;
- /* Fall through */
+ fallthrough;
case E1000E_INT_MODE_MSI:
if (!pci_enable_msi(adapter->pdev)) {
adapter->flags |= FLAG_MSI_ENABLED;
@@ -2080,7 +2088,7 @@
adapter->int_mode = E1000E_INT_MODE_LEGACY;
e_err("Failed to initialize MSI interrupts. Falling back to legacy interrupts.\n");
}
- /* Fall through */
+ fallthrough;
case E1000E_INT_MODE_LEGACY:
/* Don't do anything; this is the system default */
break;
@@ -2092,6 +2100,7 @@
/**
* e1000_request_msix - Initialize MSI-X interrupts
+ * @adapter: board private structure
*
* e1000_request_msix allocates MSI-X vectors and requests interrupts from the
* kernel.
@@ -2145,6 +2154,7 @@
/**
* e1000_request_irq - initialize interrupts
+ * @adapter: board private structure
*
* Attempts to configure interrupts using the best available
* capabilities of the hardware and kernel.
@@ -2205,6 +2215,7 @@
/**
* e1000_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
**/
static void e1000_irq_disable(struct e1000_adapter *adapter)
{
@@ -2227,6 +2238,7 @@
/**
* e1000_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
**/
static void e1000_irq_enable(struct e1000_adapter *adapter)
{
@@ -2297,14 +2309,16 @@
/**
* e1000_alloc_ring_dma - allocate memory for a ring structure
+ * @adapter: board private structure
+ * @ring: ring struct for which to allocate dma
**/
static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
struct e1000_ring *ring)
{
struct pci_dev *pdev = adapter->pdev;
- ring->desc = dma_zalloc_coherent(&pdev->dev, ring->size, &ring->dma,
- GFP_KERNEL);
+ ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
+ GFP_KERNEL);
if (!ring->desc)
return -ENOMEM;
@@ -2472,7 +2486,6 @@
/**
* e1000_update_itr - update the dynamic ITR value based on statistics
- * @adapter: pointer to adapter
* @itr_setting: current adapter->itr
* @packets: the number of packets during this measurement interval
* @bytes: the number of bytes during this measurement interval
@@ -2649,9 +2662,9 @@
/**
* e1000e_poll - NAPI Rx polling callback
* @napi: struct associated with this polling callback
- * @weight: number of packets driver is allowed to process this poll
+ * @budget: number of packets driver is allowed to process this poll
**/
-static int e1000e_poll(struct napi_struct *napi, int weight)
+static int e1000e_poll(struct napi_struct *napi, int budget)
{
struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter,
napi);
@@ -2665,16 +2678,17 @@
(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
tx_cleaned = e1000_clean_tx_irq(adapter->tx_ring);
- adapter->clean_rx(adapter->rx_ring, &work_done, weight);
+ adapter->clean_rx(adapter->rx_ring, &work_done, budget);
- if (!tx_cleaned)
- work_done = weight;
+ if (!tx_cleaned || work_done == budget)
+ return budget;
- /* If weight not fully consumed, exit the polling mode */
- if (work_done < weight) {
+ /* Exit the polling mode, but don't re-enable interrupts if stack might
+ * poll us due to busy-polling
+ */
+ if (likely(napi_complete_done(napi, work_done))) {
if (adapter->itr_setting & 3)
e1000_set_itr(adapter);
- napi_complete_done(napi, work_done);
if (!test_bit(__E1000_DOWN, &adapter->state)) {
if (adapter->msix_entries)
ew32(IMS, adapter->rx_ring->ims_val);
@@ -3013,12 +3027,13 @@
}
}
+#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
+ (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
+
/**
* e1000_setup_rctl - configure the receive control registers
* @adapter: Board private structure
**/
-#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
- (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
static void e1000_setup_rctl(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@@ -3137,10 +3152,10 @@
switch (adapter->rx_ps_pages) {
case 3:
psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE3_SHIFT;
- /* fall-through */
+ fallthrough;
case 2:
psrctl |= PAGE_SIZE << E1000_PSRCTL_BSIZE2_SHIFT;
- /* fall-through */
+ fallthrough;
case 1:
psrctl |= PAGE_SIZE >> E1000_PSRCTL_BSIZE1_SHIFT;
break;
@@ -3205,7 +3220,7 @@
if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
ew32(RCTL, rctl & ~E1000_RCTL_EN);
e1e_flush();
- usleep_range(10000, 20000);
+ usleep_range(10000, 11000);
if (adapter->flags2 & FLAG2_DMA_BURST) {
/* set the writeback threshold (only takes effect if the RDTR
@@ -3277,10 +3292,10 @@
dev_info(&adapter->pdev->dev,
"Some CPU C-states have been disabled in order to enable jumbo frames\n");
- pm_qos_update_request(&adapter->pm_qos_req, lat);
+ cpu_latency_qos_update_request(&adapter->pm_qos_req, lat);
} else {
- pm_qos_update_request(&adapter->pm_qos_req,
- PM_QOS_DEFAULT_VALUE);
+ cpu_latency_qos_update_request(&adapter->pm_qos_req,
+ PM_QOS_DEFAULT_VALUE);
}
/* Enable Receives */
@@ -3532,6 +3547,9 @@
adapter->cc.shift = shift;
break;
case e1000_pch_cnp:
+ case e1000_pch_tgp:
+ case e1000_pch_adp:
+ case e1000_pch_mtp:
if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
/* Stable 24MHz frequency */
incperiod = INCPERIOD_24MHZ;
@@ -3567,6 +3585,7 @@
/**
* e1000e_config_hwtstamp - configure the hwtstamp registers and enable/disable
* @adapter: board private structure
+ * @config: timestamp configuration
*
* Outgoing time stamping can be enabled and disabled. Play nice and
* disable it when requested, although it shouldn't cause any overhead
@@ -3635,9 +3654,8 @@
is_l2 = true;
break;
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
- /* Hardware cannot filter just V2 L4 Sync messages;
- * fall-through to V2 (both L2 and L4) Sync.
- */
+ /* Hardware cannot filter just V2 L4 Sync messages */
+ fallthrough;
case HWTSTAMP_FILTER_PTP_V2_SYNC:
/* Also time stamps V2 Path Delay Request/Response. */
tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
@@ -3646,9 +3664,8 @@
is_l4 = true;
break;
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
- /* Hardware cannot filter just V2 L4 Delay Request messages;
- * fall-through to V2 (both L2 and L4) Delay Request.
- */
+ /* Hardware cannot filter just V2 L4 Delay Request messages */
+ fallthrough;
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
/* Also time stamps V2 Path Delay Request/Response. */
tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
@@ -3658,9 +3675,8 @@
break;
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
- /* Hardware cannot filter just V2 L4 or L2 Event messages;
- * fall-through to all V2 (both L2 and L4) Events.
- */
+ /* Hardware cannot filter just V2 L4 or L2 Event messages */
+ fallthrough;
case HWTSTAMP_FILTER_PTP_V2_EVENT:
tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
@@ -3672,6 +3688,7 @@
* Delay Request messages but not both so fall-through to
* time stamp all packets.
*/
+ fallthrough;
case HWTSTAMP_FILTER_NTP_ALL:
case HWTSTAMP_FILTER_ALL:
is_l2 = true;
@@ -3772,6 +3789,7 @@
/**
* e1000_power_down_phy - Power down the PHY
+ * @adapter: board private structure
*
* Power down the PHY so no link is implied when interface is down.
* The PHY cannot be powered down if management or WoL is active.
@@ -3784,6 +3802,7 @@
/**
* e1000_flush_tx_ring - remove all descriptors from the tx_ring
+ * @adapter: board private structure
*
* We want to clear all pending descriptors from the TX ring.
* zeroing happens when the HW reads the regs. We assign the ring itself as
@@ -3803,7 +3822,7 @@
tdt = er32(TDT(0));
BUG_ON(tdt != tx_ring->next_to_use);
tx_desc = E1000_TX_DESC(*tx_ring, tx_ring->next_to_use);
- tx_desc->buffer_addr = tx_ring->dma;
+ tx_desc->buffer_addr = cpu_to_le64(tx_ring->dma);
tx_desc->lower.data = cpu_to_le32(txd_lower | size);
tx_desc->upper.data = 0;
@@ -3813,12 +3832,12 @@
if (tx_ring->next_to_use == tx_ring->count)
tx_ring->next_to_use = 0;
ew32(TDT(0), tx_ring->next_to_use);
- mmiowb();
usleep_range(200, 250);
}
/**
* e1000_flush_rx_ring - remove all descriptors from the rx_ring
+ * @adapter: board private structure
*
* Mark all descriptors in the RX ring as consumed and disable the rx ring
*/
@@ -3851,6 +3870,7 @@
/**
* e1000_flush_desc_rings - remove all descriptors from the descriptor rings
+ * @adapter: board private structure
*
* In i219, the descriptor rings must be emptied before resetting the HW
* or before changing the device state to D3 during runtime (runtime PM).
@@ -3933,6 +3953,7 @@
/**
* e1000e_reset - bring the hardware into a known good state
+ * @adapter: board private structure
*
* This function boots the hardware and enables some settings that
* require a configuration cycle of the hardware - those cannot be
@@ -4019,7 +4040,7 @@
fc->low_water = fc->high_water - 8;
break;
}
- /* fall-through */
+ fallthrough;
default:
hwm = min(((pba << 10) * 9 / 10),
((pba << 10) - adapter->max_frame_size));
@@ -4044,12 +4065,15 @@
case e1000_pch_lpt:
case e1000_pch_spt:
case e1000_pch_cnp:
- fc->refresh_time = 0x0400;
+ case e1000_pch_tgp:
+ case e1000_pch_adp:
+ case e1000_pch_mtp:
+ fc->refresh_time = 0xFFFF;
+ fc->pause_time = 0xFFFF;
if (adapter->netdev->mtu <= ETH_DATA_LEN) {
fc->high_water = 0x05C20;
fc->low_water = 0x05048;
- fc->pause_time = 0x0650;
break;
}
@@ -4270,7 +4294,7 @@
/* flush both disables and wait for them to finish */
e1e_flush();
- usleep_range(10000, 20000);
+ usleep_range(10000, 11000);
e1000_irq_disable(adapter);
@@ -4308,7 +4332,7 @@
{
might_sleep();
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
+ usleep_range(1000, 1100);
e1000e_down(adapter, true);
e1000e_up(adapter);
clear_bit(__E1000_RESETTING, &adapter->state);
@@ -4317,13 +4341,16 @@
/**
* e1000e_sanitize_systim - sanitize raw cycle counter reads
* @hw: pointer to the HW structure
- * @systim: time value read, sanitized and returned
+ * @systim: PHC time value read, sanitized and returned
+ * @sts: structure to hold system time before and after reading SYSTIML,
+ * may be NULL
*
* Errata for 82574/82583 possible bad bits read from SYSTIMH/L:
* check to see that the time is incrementing at a reasonable
* rate and is a multiple of incvalue.
**/
-static u64 e1000e_sanitize_systim(struct e1000_hw *hw, u64 systim)
+static u64 e1000e_sanitize_systim(struct e1000_hw *hw, u64 systim,
+ struct ptp_system_timestamp *sts)
{
u64 time_delta, rem, temp;
u64 systim_next;
@@ -4333,7 +4360,9 @@
incvalue = er32(TIMINCA) & E1000_TIMINCA_INCVALUE_MASK;
for (i = 0; i < E1000_MAX_82574_SYSTIM_REREADS; i++) {
/* latch SYSTIMH on read of SYSTIML */
+ ptp_read_system_prets(sts);
systim_next = (u64)er32(SYSTIML);
+ ptp_read_system_postts(sts);
systim_next |= (u64)er32(SYSTIMH) << 32;
time_delta = systim_next - systim;
@@ -4351,15 +4380,16 @@
}
/**
- * e1000e_cyclecounter_read - read raw cycle counter (used by time counter)
- * @cc: cyclecounter structure
+ * e1000e_read_systim - read SYSTIM register
+ * @adapter: board private structure
+ * @sts: structure which will contain system time before and after reading
+ * SYSTIML, may be NULL
**/
-static u64 e1000e_cyclecounter_read(const struct cyclecounter *cc)
+u64 e1000e_read_systim(struct e1000_adapter *adapter,
+ struct ptp_system_timestamp *sts)
{
- struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
- cc);
struct e1000_hw *hw = &adapter->hw;
- u32 systimel, systimeh;
+ u32 systimel, systimel_2, systimeh;
u64 systim;
/* SYSTIMH latching upon SYSTIML read does not work well.
* This means that if SYSTIML overflows after we read it but before
@@ -4367,11 +4397,15 @@
* will experience a huge non linear increment in the systime value
* to fix that we test for overflow and if true, we re-read systime.
*/
+ ptp_read_system_prets(sts);
systimel = er32(SYSTIML);
+ ptp_read_system_postts(sts);
systimeh = er32(SYSTIMH);
/* Is systimel is so large that overflow is possible? */
if (systimel >= (u32)0xffffffff - E1000_TIMINCA_INCVALUE_MASK) {
- u32 systimel_2 = er32(SYSTIML);
+ ptp_read_system_prets(sts);
+ systimel_2 = er32(SYSTIML);
+ ptp_read_system_postts(sts);
if (systimel > systimel_2) {
/* There was an overflow, read again SYSTIMH, and use
* systimel_2
@@ -4384,9 +4418,21 @@
systim |= (u64)systimeh << 32;
if (adapter->flags2 & FLAG2_CHECK_SYSTIM_OVERFLOW)
- systim = e1000e_sanitize_systim(hw, systim);
+ systim = e1000e_sanitize_systim(hw, systim, sts);
return systim;
+}
+
+/**
+ * e1000e_cyclecounter_read - read raw cycle counter (used by time counter)
+ * @cc: cyclecounter structure
+ **/
+static u64 e1000e_cyclecounter_read(const struct cyclecounter *cc)
+{
+ struct e1000_adapter *adapter = container_of(cc, struct e1000_adapter,
+ cc);
+
+ return e1000e_read_systim(adapter, NULL);
}
/**
@@ -4609,8 +4655,7 @@
e1000_update_mng_vlan(adapter);
/* DMA latency requirement to workaround jumbo issue */
- pm_qos_add_request(&adapter->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_DEFAULT_VALUE);
+ cpu_latency_qos_add_request(&adapter->pm_qos_req, PM_QOS_DEFAULT_VALUE);
/* before we allocate an interrupt, we must be ready to handle it.
* Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
@@ -4652,7 +4697,7 @@
return 0;
err_req_irq:
- pm_qos_remove_request(&adapter->pm_qos_req);
+ cpu_latency_qos_remove_request(&adapter->pm_qos_req);
e1000e_release_hw_control(adapter);
e1000_power_down_phy(adapter);
e1000e_free_rx_resources(adapter->rx_ring);
@@ -4683,18 +4728,18 @@
int count = E1000_CHECK_RESET_COUNT;
while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
- usleep_range(10000, 20000);
+ usleep_range(10000, 11000);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
pm_runtime_get_sync(&pdev->dev);
- if (!test_bit(__E1000_DOWN, &adapter->state)) {
+ if (netif_device_present(netdev)) {
e1000e_down(adapter, true);
e1000_free_irq(adapter);
/* Link status message must follow this format */
- pr_info("%s NIC Link is Down\n", adapter->netdev->name);
+ netdev_info(netdev, "NIC Link is Down\n");
}
napi_disable(&adapter->napi);
@@ -4716,7 +4761,7 @@
!test_bit(__E1000_TESTING, &adapter->state))
e1000e_release_hw_control(adapter);
- pm_qos_remove_request(&adapter->pm_qos_req);
+ cpu_latency_qos_remove_request(&adapter->pm_qos_req);
pm_runtime_put_sync(&pdev->dev);
@@ -4789,7 +4834,7 @@
/**
* e1000_update_phy_info - timre call-back to update PHY info
- * @data: pointer to adapter cast into an unsigned long
+ * @t: pointer to timer_list containing private info adapter
*
* Need to wait a few seconds after link up to get diagnostic information from
* the phy
@@ -5044,12 +5089,13 @@
u32 ctrl = er32(CTRL);
/* Link status message must follow this format for user tools */
- pr_info("%s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
- adapter->netdev->name, adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
- (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
- (ctrl & E1000_CTRL_RFCE) ? "Rx" :
- (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
+ netdev_info(adapter->netdev,
+ "NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ? "Full" : "Half",
+ (ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE) ? "Rx/Tx" :
+ (ctrl & E1000_CTRL_RFCE) ? "Rx" :
+ (ctrl & E1000_CTRL_TFCE) ? "Tx" : "None");
}
static bool e1000e_has_link(struct e1000_adapter *adapter)
@@ -5128,7 +5174,7 @@
/**
* e1000_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
+ * @t: pointer to timer_list containing private info adapter
**/
static void e1000_watchdog(struct timer_list *t)
{
@@ -5149,8 +5195,9 @@
struct e1000_mac_info *mac = &adapter->hw.mac;
struct e1000_phy_info *phy = &adapter->hw.phy;
struct e1000_ring *tx_ring = adapter->tx_ring;
+ u32 dmoff_exit_timeout = 100, tries = 0;
struct e1000_hw *hw = &adapter->hw;
- u32 link, tctl;
+ u32 link, tctl, pcim_state;
if (test_bit(__E1000_DOWN, &adapter->state))
return;
@@ -5174,6 +5221,23 @@
/* Cancel scheduled suspend requests. */
pm_runtime_resume(netdev->dev.parent);
+
+ /* Checking if MAC is in DMoff state*/
+ if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+ pcim_state = er32(STATUS);
+ while (pcim_state & E1000_STATUS_PCIM_STATE) {
+ if (tries++ == dmoff_exit_timeout) {
+ e_dbg("Error in exiting dmoff\n");
+ break;
+ }
+ usleep_range(10000, 20000);
+ pcim_state = er32(STATUS);
+
+ /* Checking if MAC exited DMoff state */
+ if (!(pcim_state & E1000_STATUS_PCIM_STATE))
+ e1000_phy_hw_reset(&adapter->hw);
+ }
+ }
/* update snapshot of PHY registers on LSC */
e1000_phy_read_status(adapter);
@@ -5280,7 +5344,7 @@
adapter->link_speed = 0;
adapter->link_duplex = 0;
/* Link status message must follow this format */
- pr_info("%s NIC Link is Down\n", adapter->netdev->name);
+ netdev_info(netdev, "NIC Link is Down\n");
netif_carrier_off(netdev);
netif_stop_queue(netdev);
if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -5422,10 +5486,7 @@
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb_transport_offset(skb) - 1;
} else if (skb_is_gso_v6(skb)) {
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
+ tcp_v6_gso_csum_prep(skb);
ipcse = 0;
}
ipcss = skb_network_offset(skb);
@@ -5554,9 +5615,8 @@
}
for (f = 0; f < nr_frags; f++) {
- const struct skb_frag_struct *frag;
+ const skb_frag_t *frag = &skb_shinfo(skb)->frags[f];
- frag = &skb_shinfo(skb)->frags[f];
len = skb_frag_size(frag);
offset = 0;
@@ -5877,23 +5937,17 @@
e1000_tx_queue(tx_ring, tx_flags, count);
/* Make sure there is space in the ring for the next send. */
e1000_maybe_stop_tx(tx_ring,
- (MAX_SKB_FRAGS *
+ ((MAX_SKB_FRAGS + 1) *
DIV_ROUND_UP(PAGE_SIZE,
- adapter->tx_fifo_limit) + 2));
+ adapter->tx_fifo_limit) + 4));
- if (!skb->xmit_more ||
+ if (!netdev_xmit_more() ||
netif_xmit_stopped(netdev_get_tx_queue(netdev, 0))) {
if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
e1000e_update_tdt_wa(tx_ring,
tx_ring->next_to_use);
else
writel(tx_ring->next_to_use, tx_ring->tail);
-
- /* we need this if more than one processor can write
- * to our tail at a time, it synchronizes IO on
- *IA64/Altix systems
- */
- mmiowb();
}
} else {
dev_kfree_skb_any(skb);
@@ -5907,8 +5961,9 @@
/**
* e1000_tx_timeout - Respond to a Tx Hang
* @netdev: network interface device structure
+ * @txqueue: index of the hung queue (unused)
**/
-static void e1000_tx_timeout(struct net_device *netdev)
+static void e1000_tx_timeout(struct net_device *netdev, unsigned int __always_unused txqueue)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -6011,10 +6066,11 @@
}
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
+ usleep_range(1000, 1100);
/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
adapter->max_frame_size = max_frame;
- e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+ netdev_dbg(netdev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
pm_runtime_get_sync(netdev->dev.parent);
@@ -6112,7 +6168,7 @@
/**
* e1000e_hwtstamp_ioctl - control hardware time stamping
* @netdev: network interface device structure
- * @ifreq: interface request
+ * @ifr: interface request
*
* Outgoing time stamping can be enabled and disabled. Play nice and
* disable it when requested, although it shouldn't cause any overhead
@@ -6280,18 +6336,244 @@
pm_runtime_put_sync(netdev->dev.parent);
}
+/* S0ix implementation */
+static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mac_data;
+ u16 phy_data;
+
+ /* Disable the periodic inband message,
+ * don't request PCIe clock in K1 page770_17[10:9] = 10b
+ */
+ e1e_rphy(hw, HV_PM_CTRL, &phy_data);
+ phy_data &= ~HV_PM_CTRL_K1_CLK_REQ;
+ phy_data |= BIT(10);
+ e1e_wphy(hw, HV_PM_CTRL, phy_data);
+
+ /* Make sure we don't exit K1 every time a new packet arrives
+ * 772_29[5] = 1 CS_Mode_Stay_In_K1
+ */
+ e1e_rphy(hw, I217_CGFREG, &phy_data);
+ phy_data |= BIT(5);
+ e1e_wphy(hw, I217_CGFREG, phy_data);
+
+ /* Change the MAC/PHY interface to SMBus
+ * Force the SMBus in PHY page769_23[0] = 1
+ * Force the SMBus in MAC CTRL_EXT[11] = 1
+ */
+ e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
+ phy_data |= CV_SMB_CTRL_FORCE_SMBUS;
+ e1e_wphy(hw, CV_SMB_CTRL, phy_data);
+ mac_data = er32(CTRL_EXT);
+ mac_data |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_data);
+
+ /* DFT control: PHY bit: page769_20[0] = 1
+ * Gate PPW via EXTCNF_CTRL - set 0x0F00[7] = 1
+ */
+ e1e_rphy(hw, I82579_DFT_CTRL, &phy_data);
+ phy_data |= BIT(0);
+ e1e_wphy(hw, I82579_DFT_CTRL, phy_data);
+
+ mac_data = er32(EXTCNF_CTRL);
+ mac_data |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+ ew32(EXTCNF_CTRL, mac_data);
+
+ /* Check MAC Tx/Rx packet buffer pointers.
+ * Reset MAC Tx/Rx packet buffer pointers to suppress any
+ * pending traffic indication that would prevent power gating.
+ */
+ mac_data = er32(TDFH);
+ if (mac_data)
+ ew32(TDFH, 0);
+ mac_data = er32(TDFT);
+ if (mac_data)
+ ew32(TDFT, 0);
+ mac_data = er32(TDFHS);
+ if (mac_data)
+ ew32(TDFHS, 0);
+ mac_data = er32(TDFTS);
+ if (mac_data)
+ ew32(TDFTS, 0);
+ mac_data = er32(TDFPC);
+ if (mac_data)
+ ew32(TDFPC, 0);
+ mac_data = er32(RDFH);
+ if (mac_data)
+ ew32(RDFH, 0);
+ mac_data = er32(RDFT);
+ if (mac_data)
+ ew32(RDFT, 0);
+ mac_data = er32(RDFHS);
+ if (mac_data)
+ ew32(RDFHS, 0);
+ mac_data = er32(RDFTS);
+ if (mac_data)
+ ew32(RDFTS, 0);
+ mac_data = er32(RDFPC);
+ if (mac_data)
+ ew32(RDFPC, 0);
+
+ /* Enable the Dynamic Power Gating in the MAC */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(22);
+ ew32(FEXTNVM7, mac_data);
+
+ /* Disable the time synchronization clock */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(31);
+ mac_data &= ~BIT(0);
+ ew32(FEXTNVM7, mac_data);
+
+ /* Dynamic Power Gating Enable */
+ mac_data = er32(CTRL_EXT);
+ mac_data |= BIT(3);
+ ew32(CTRL_EXT, mac_data);
+
+ /* Disable disconnected cable conditioning for Power Gating */
+ mac_data = er32(DPGFR);
+ mac_data |= BIT(2);
+ ew32(DPGFR, mac_data);
+
+ /* Don't wake from dynamic Power Gating with clock request */
+ mac_data = er32(FEXTNVM12);
+ mac_data |= BIT(12);
+ ew32(FEXTNVM12, mac_data);
+
+ /* Ungate PGCB clock */
+ mac_data = er32(FEXTNVM9);
+ mac_data &= ~BIT(28);
+ ew32(FEXTNVM9, mac_data);
+
+ /* Enable K1 off to enable mPHY Power Gating */
+ mac_data = er32(FEXTNVM6);
+ mac_data |= BIT(31);
+ ew32(FEXTNVM6, mac_data);
+
+ /* Enable mPHY power gating for any link and speed */
+ mac_data = er32(FEXTNVM8);
+ mac_data |= BIT(9);
+ ew32(FEXTNVM8, mac_data);
+
+ /* Enable the Dynamic Clock Gating in the DMA and MAC */
+ mac_data = er32(CTRL_EXT);
+ mac_data |= E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, mac_data);
+
+ /* No MAC DPG gating SLP_S0 in modern standby
+ * Switch the logic of the lanphypc to use PMC counter
+ */
+ mac_data = er32(FEXTNVM5);
+ mac_data |= BIT(7);
+ ew32(FEXTNVM5, mac_data);
+}
+
+static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mac_data;
+ u16 phy_data;
+
+ /* Disable the Dynamic Power Gating in the MAC */
+ mac_data = er32(FEXTNVM7);
+ mac_data &= 0xFFBFFFFF;
+ ew32(FEXTNVM7, mac_data);
+
+ /* Enable the time synchronization clock */
+ mac_data = er32(FEXTNVM7);
+ mac_data |= BIT(0);
+ ew32(FEXTNVM7, mac_data);
+
+ /* Disable mPHY power gating for any link and speed */
+ mac_data = er32(FEXTNVM8);
+ mac_data &= ~BIT(9);
+ ew32(FEXTNVM8, mac_data);
+
+ /* Disable K1 off */
+ mac_data = er32(FEXTNVM6);
+ mac_data &= ~BIT(31);
+ ew32(FEXTNVM6, mac_data);
+
+ /* Disable Ungate PGCB clock */
+ mac_data = er32(FEXTNVM9);
+ mac_data |= BIT(28);
+ ew32(FEXTNVM9, mac_data);
+
+ /* Cancel not waking from dynamic
+ * Power Gating with clock request
+ */
+ mac_data = er32(FEXTNVM12);
+ mac_data &= ~BIT(12);
+ ew32(FEXTNVM12, mac_data);
+
+ /* Cancel disable disconnected cable conditioning
+ * for Power Gating
+ */
+ mac_data = er32(DPGFR);
+ mac_data &= ~BIT(2);
+ ew32(DPGFR, mac_data);
+
+ /* Disable Dynamic Power Gating */
+ mac_data = er32(CTRL_EXT);
+ mac_data &= 0xFFFFFFF7;
+ ew32(CTRL_EXT, mac_data);
+
+ /* Disable the Dynamic Clock Gating in the DMA and MAC */
+ mac_data = er32(CTRL_EXT);
+ mac_data &= 0xFFF7FFFF;
+ ew32(CTRL_EXT, mac_data);
+
+ /* Revert the lanphypc logic to use the internal Gbe counter
+ * and not the PMC counter
+ */
+ mac_data = er32(FEXTNVM5);
+ mac_data &= 0xFFFFFF7F;
+ ew32(FEXTNVM5, mac_data);
+
+ /* Enable the periodic inband message,
+ * Request PCIe clock in K1 page770_17[10:9] =01b
+ */
+ e1e_rphy(hw, HV_PM_CTRL, &phy_data);
+ phy_data &= 0xFBFF;
+ phy_data |= HV_PM_CTRL_K1_CLK_REQ;
+ e1e_wphy(hw, HV_PM_CTRL, phy_data);
+
+ /* Return back configuration
+ * 772_29[5] = 0 CS_Mode_Stay_In_K1
+ */
+ e1e_rphy(hw, I217_CGFREG, &phy_data);
+ phy_data &= 0xFFDF;
+ e1e_wphy(hw, I217_CGFREG, phy_data);
+
+ /* Change the MAC/PHY interface to Kumeran
+ * Unforce the SMBus in PHY page769_23[0] = 0
+ * Unforce the SMBus in MAC CTRL_EXT[11] = 0
+ */
+ e1e_rphy(hw, CV_SMB_CTRL, &phy_data);
+ phy_data &= ~CV_SMB_CTRL_FORCE_SMBUS;
+ e1e_wphy(hw, CV_SMB_CTRL, phy_data);
+ mac_data = er32(CTRL_EXT);
+ mac_data &= ~E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, mac_data);
+}
+
static int e1000e_pm_freeze(struct device *dev)
{
- struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+ struct net_device *netdev = dev_get_drvdata(dev);
struct e1000_adapter *adapter = netdev_priv(netdev);
+ bool present;
+ rtnl_lock();
+
+ present = netif_device_present(netdev);
netif_device_detach(netdev);
- if (netif_running(netdev)) {
+ if (present && netif_running(netdev)) {
int count = E1000_CHECK_RESET_COUNT;
while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
- usleep_range(10000, 20000);
+ usleep_range(10000, 11000);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
@@ -6299,6 +6581,8 @@
e1000e_down(adapter, false);
e1000_free_irq(adapter);
}
+ rtnl_unlock();
+
e1000e_reset_interrupt_capability(adapter);
/* Allow time for pending master requests to run */
@@ -6471,7 +6755,7 @@
case PCIE_LINK_STATE_L0S:
case PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1:
aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L0S;
- /* fall-through - can't have L1 without L0s */
+ fallthrough; /* can't have L1 without L0s */
case PCIE_LINK_STATE_L1:
aspm_dis_mask |= PCI_EXP_LNKCTL_ASPM_L1;
break;
@@ -6552,7 +6836,30 @@
__e1000e_disable_aspm(pdev, state, 1);
}
-#ifdef CONFIG_PM
+static int e1000e_pm_thaw(struct device *dev)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int rc = 0;
+
+ e1000e_set_interrupt_capability(adapter);
+
+ rtnl_lock();
+ if (netif_running(netdev)) {
+ rc = e1000_request_irq(adapter);
+ if (rc)
+ goto err_irq;
+
+ e1000e_up(adapter);
+ }
+
+ netif_device_attach(netdev);
+err_irq:
+ rtnl_unlock();
+
+ return rc;
+}
+
static int __e1000_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
@@ -6618,29 +6925,10 @@
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int e1000e_pm_thaw(struct device *dev)
+static __maybe_unused int e1000e_pm_suspend(struct device *dev)
{
struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
struct e1000_adapter *adapter = netdev_priv(netdev);
-
- e1000e_set_interrupt_capability(adapter);
- if (netif_running(netdev)) {
- u32 err = e1000_request_irq(adapter);
-
- if (err)
- return err;
-
- e1000e_up(adapter);
- }
-
- netif_device_attach(netdev);
-
- return 0;
-}
-
-static int e1000e_pm_suspend(struct device *dev)
-{
struct pci_dev *pdev = to_pci_dev(dev);
int rc;
@@ -6649,16 +6937,27 @@
e1000e_pm_freeze(dev);
rc = __e1000_shutdown(pdev, false);
- if (rc)
+ if (rc) {
e1000e_pm_thaw(dev);
+ } else {
+ /* Introduce S0ix implementation */
+ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
+ e1000e_s0ix_entry_flow(adapter);
+ }
return rc;
}
-static int e1000e_pm_resume(struct device *dev)
+static __maybe_unused int e1000e_pm_resume(struct device *dev)
{
+ struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev));
+ struct e1000_adapter *adapter = netdev_priv(netdev);
struct pci_dev *pdev = to_pci_dev(dev);
int rc;
+
+ /* Introduce S0ix implementation */
+ if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
+ e1000e_s0ix_exit_flow(adapter);
rc = __e1000_resume(pdev);
if (rc)
@@ -6666,12 +6965,10 @@
return e1000e_pm_thaw(dev);
}
-#endif /* CONFIG_PM_SLEEP */
-static int e1000e_pm_runtime_idle(struct device *dev)
+static __maybe_unused int e1000e_pm_runtime_idle(struct device *dev)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct net_device *netdev = pci_get_drvdata(pdev);
+ struct net_device *netdev = dev_get_drvdata(dev);
struct e1000_adapter *adapter = netdev_priv(netdev);
u16 eee_lp;
@@ -6685,7 +6982,7 @@
return -EBUSY;
}
-static int e1000e_pm_runtime_resume(struct device *dev)
+static __maybe_unused int e1000e_pm_runtime_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
@@ -6702,7 +6999,7 @@
return rc;
}
-static int e1000e_pm_runtime_suspend(struct device *dev)
+static __maybe_unused int e1000e_pm_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
@@ -6712,7 +7009,7 @@
int count = E1000_CHECK_RESET_COUNT;
while (test_bit(__E1000_RESETTING, &adapter->state) && count--)
- usleep_range(10000, 20000);
+ usleep_range(10000, 11000);
WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
@@ -6727,7 +7024,6 @@
return 0;
}
-#endif /* CONFIG_PM */
static void e1000_shutdown(struct pci_dev *pdev)
{
@@ -6811,16 +7107,11 @@
static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- netif_device_detach(netdev);
+ e1000e_pm_freeze(&pdev->dev);
if (state == pci_channel_io_perm_failure)
return PCI_ERS_RESULT_DISCONNECT;
- if (netif_running(netdev))
- e1000e_down(adapter, true);
pci_disable_device(pdev);
/* Request a slot slot reset. */
@@ -6868,8 +7159,6 @@
result = PCI_ERS_RESULT_RECOVERED;
}
- pci_cleanup_aer_uncorrect_error_status(pdev);
-
return result;
}
@@ -6888,10 +7177,7 @@
e1000_init_manageability_pt(adapter);
- if (netif_running(netdev))
- e1000e_up(adapter);
-
- netif_device_attach(netdev);
+ e1000e_pm_thaw(&pdev->dev);
/* If the controller has AMT, do not set DRV_LOAD until the interface
* is up. For all other cases, let the f/w know that the h/w is now
@@ -6999,7 +7285,7 @@
else
e1000e_reset(adapter);
- return 0;
+ return 1;
}
static const struct net_device_ops e1000e_netdev_ops = {
@@ -7334,6 +7620,9 @@
if (!(adapter->flags & FLAG_HAS_AMT))
e1000e_get_hw_control(adapter);
+ if (hw->mac.type >= e1000_pch_cnp)
+ adapter->flags2 |= FLAG2_ENABLE_S0IX_FLOWS;
+
strlcpy(netdev->name, "eth%d", sizeof(netdev->name));
err = register_netdev(netdev);
if (err)
@@ -7344,7 +7633,7 @@
e1000_print_device_info(adapter);
- dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+ dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
if (pci_dev_run_wake(pdev) && hw->mac.type < e1000_pch_cnp)
pm_runtime_put_noidle(&pdev->dev);
@@ -7390,15 +7679,13 @@
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- bool down = test_bit(__E1000_DOWN, &adapter->state);
e1000e_ptp_remove(adapter);
/* The timers may be rescheduled, so explicitly disable them
* from being rescheduled.
*/
- if (!down)
- set_bit(__E1000_DOWN, &adapter->state);
+ set_bit(__E1000_DOWN, &adapter->state);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
@@ -7416,9 +7703,6 @@
}
}
- /* Don't lie to e1000_close() down the road. */
- if (!down)
- clear_bit(__E1000_DOWN, &adapter->state);
unregister_netdev(netdev);
if (pci_dev_run_wake(pdev))
@@ -7548,6 +7832,26 @@
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_V8), board_pch_cnp },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_LM9), board_pch_cnp },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ICP_I219_V9), board_pch_cnp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_LM10), board_pch_cnp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V10), board_pch_cnp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_LM11), board_pch_cnp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V11), board_pch_cnp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_LM12), board_pch_spt },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_CMP_I219_V12), board_pch_spt },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM13), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V13), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM14), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V14), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_LM15), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_TGP_I219_V15), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM16), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V16), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_LM17), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_ADP_I219_V17), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM18), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V18), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_LM19), board_pch_tgp },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_MTP_I219_V19), board_pch_tgp },
{ 0, 0, 0, 0, 0, 0, 0 } /* terminate list */
};
@@ -7587,8 +7891,7 @@
**/
static int __init e1000_init_module(void)
{
- pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
- e1000e_driver_version);
+ pr_info("Intel(R) PRO/1000 Network Driver\n");
pr_info("Copyright(c) 1999 - 2015 Intel Corporation.\n");
return pci_register_driver(&e1000_driver);
@@ -7609,7 +7912,6 @@
MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL v2");
/* netdev.c */
--
Gitblit v1.6.2