From 1c055e55a242a33e574e48be530e06770a210dcd Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 19 Feb 2024 03:26:26 +0000
Subject: [PATCH] add r8169 read mac form eeprom
---
kernel/drivers/usb/serial/cypress_m8.c | 60 +++++++++++++-----------------------------------------------
1 files changed, 13 insertions(+), 47 deletions(-)
diff --git a/kernel/drivers/usb/serial/cypress_m8.c b/kernel/drivers/usb/serial/cypress_m8.c
index 4ed8de1..cc02860 100644
--- a/kernel/drivers/usb/serial/cypress_m8.c
+++ b/kernel/drivers/usb/serial/cypress_m8.c
@@ -7,7 +7,7 @@
* Copyright (C) 2003,2004
* Neil Whelchel (koyama@firstlight.net)
*
- * See Documentation/usb/usb-serial.txt for more information on using this
+ * See Documentation/usb/usb-serial.rst for more information on using this
* driver
*
* See http://geocities.com/i0xox0i for information on this driver and the
@@ -100,7 +100,6 @@
int write_urb_interval; /* interval to use for write urb */
int read_urb_interval; /* interval to use for read urb */
int comm_is_ok; /* true if communication is (still) ok */
- int termios_initialized;
__u8 line_control; /* holds dtr / rts value */
__u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
__u8 current_config; /* stores the current configuration byte */
@@ -109,11 +108,7 @@
int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */
int baud_rate; /* stores current baud rate in
integer form */
- int isthrottled; /* if throttled, discard reads */
char prev_status; /* used for TIOCMIWAIT */
- /* we pass a pointer to this as the argument sent to
- cypress_set_termios old_termios */
- struct ktermios tmp_termios; /* stores the old termios settings */
};
/* function prototypes for the Cypress USB to serial device */
@@ -128,6 +123,7 @@
const unsigned char *buf, int count);
static void cypress_send(struct usb_serial_port *port);
static int cypress_write_room(struct tty_struct *tty);
+static void cypress_earthmate_init_termios(struct tty_struct *tty);
static void cypress_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int cypress_tiocmget(struct tty_struct *tty);
@@ -155,6 +151,7 @@
.dtr_rts = cypress_dtr_rts,
.write = cypress_write,
.write_room = cypress_write_room,
+ .init_termios = cypress_earthmate_init_termios,
.set_termios = cypress_set_termios,
.tiocmget = cypress_tiocmget,
.tiocmset = cypress_tiocmset,
@@ -380,7 +377,7 @@
retval = -ENOTTY;
goto out;
}
- dev_dbg(dev, "%s - retreiving serial line settings\n", __func__);
+ dev_dbg(dev, "%s - retrieving serial line settings\n", __func__);
do {
retval = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
@@ -469,7 +466,6 @@
priv->cmd_ctrl = 0;
priv->line_control = 0;
- priv->termios_initialized = 0;
priv->rx_flags = 0;
/* Default packet format setting is determined by packet size.
Anything with a size larger then 9 must have a separate
@@ -606,7 +602,7 @@
cypress_send(port);
if (tty)
- cypress_set_termios(tty, port, &priv->tmp_termios);
+ cypress_set_termios(tty, port, NULL);
/* setup the port and start reading from the device */
usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
@@ -859,56 +855,26 @@
return cypress_write(tty, port, NULL, 0);
}
+static void cypress_earthmate_init_termios(struct tty_struct *tty)
+{
+ tty_encode_baud_rate(tty, 4800, 4800);
+}
+
static void cypress_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
struct device *dev = &port->dev;
int data_bits, stop_bits, parity_type, parity_enable;
- unsigned cflag, iflag;
+ unsigned int cflag;
unsigned long flags;
__u8 oldlines;
int linechange = 0;
-
- spin_lock_irqsave(&priv->lock, flags);
- /* We can't clean this one up as we don't know the device type
- early enough */
- if (!priv->termios_initialized) {
- if (priv->chiptype == CT_EARTHMATE) {
- tty->termios = tty_std_termios;
- tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
- CLOCAL;
- tty->termios.c_ispeed = 4800;
- tty->termios.c_ospeed = 4800;
- } else if (priv->chiptype == CT_CYPHIDCOM) {
- tty->termios = tty_std_termios;
- tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
- CLOCAL;
- tty->termios.c_ispeed = 9600;
- tty->termios.c_ospeed = 9600;
- } else if (priv->chiptype == CT_CA42V2) {
- tty->termios = tty_std_termios;
- tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
- CLOCAL;
- tty->termios.c_ispeed = 9600;
- tty->termios.c_ospeed = 9600;
- }
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
/* Unsupported features need clearing */
tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
-
- /* check if there are new settings */
- if (old_termios) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->tmp_termios = tty->termios;
- spin_unlock_irqrestore(&priv->lock, flags);
- }
/* set number of data bits, parity, stop bits */
/* when parity is disabled the parity type bit is ignored */
@@ -1082,7 +1048,7 @@
return;
case -EPIPE:
/* Can't call usb_clear_halt while in_interrupt */
- /* FALLS THROUGH */
+ fallthrough;
default:
/* something ugly is going on... */
dev_err(dev, "%s - unexpected nonzero read status received: %d\n",
@@ -1231,7 +1197,7 @@
return;
case -EPIPE:
/* Cannot call usb_clear_halt while in_interrupt */
- /* FALLTHROUGH */
+ fallthrough;
default:
dev_err(dev, "%s - unexpected nonzero write status received: %d\n",
__func__, status);
--
Gitblit v1.6.2