From 1c055e55a242a33e574e48be530e06770a210dcd Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 19 Feb 2024 03:26:26 +0000
Subject: [PATCH] add r8169 read mac form eeprom
---
kernel/drivers/usb/musb/omap2430.c | 169 +++++++++++++++++--------------------------------------
1 files changed, 53 insertions(+), 116 deletions(-)
diff --git a/kernel/drivers/usb/musb/omap2430.c b/kernel/drivers/usb/musb/omap2430.c
index 24e622c..1d435e4 100644
--- a/kernel/drivers/usb/musb/omap2430.c
+++ b/kernel/drivers/usb/musb/omap2430.c
@@ -38,69 +38,6 @@
static struct omap2430_glue *_glue;
-static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
-{
- struct usb_otg *otg = musb->xceiv->otg;
- u8 devctl;
- unsigned long timeout = jiffies + msecs_to_jiffies(1000);
- /* HDRC controls CPEN, but beware current surges during device
- * connect. They can trigger transient overcurrent conditions
- * that must be ignored.
- */
-
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
- if (is_on) {
- if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) {
- int loops = 100;
- /* start the session */
- devctl |= MUSB_DEVCTL_SESSION;
- musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
- /*
- * Wait for the musb to set as A device to enable the
- * VBUS
- */
- while (musb_readb(musb->mregs, MUSB_DEVCTL) &
- MUSB_DEVCTL_BDEVICE) {
-
- mdelay(5);
- cpu_relax();
-
- if (time_after(jiffies, timeout)
- || loops-- <= 0) {
- dev_err(musb->controller,
- "configured as A device timeout");
- break;
- }
- }
-
- otg_set_vbus(otg, 1);
- } else {
- musb->is_active = 1;
- musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
- devctl |= MUSB_DEVCTL_SESSION;
- MUSB_HST_MODE(musb);
- }
- } else {
- musb->is_active = 0;
-
- /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and
- * jumping right to B_IDLE...
- */
-
- musb->xceiv->otg->state = OTG_STATE_B_IDLE;
- devctl &= ~MUSB_DEVCTL_SESSION;
-
- MUSB_DEV_MODE(musb);
- }
- musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
-
- dev_dbg(musb->controller, "VBUS %s, devctl %02x "
- /* otg %3x conf %08x prcm %08x */ "\n",
- usb_otg_state_string(musb->xceiv->otg->state),
- musb_readb(musb->mregs, MUSB_DEVCTL));
-}
-
static inline void omap2430_low_level_exit(struct musb *musb)
{
u32 l;
@@ -140,24 +77,52 @@
return 0;
}
+/*
+ * HDRC controls CPEN, but beware current surges during device connect.
+ * They can trigger transient overcurrent conditions that must be ignored.
+ *
+ * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE
+ * as set by musb_set_peripheral().
+ */
static void omap_musb_set_mailbox(struct omap2430_glue *glue)
{
struct musb *musb = glue_to_musb(glue);
- struct musb_hdrc_platform_data *pdata =
- dev_get_platdata(musb->controller);
- struct omap_musb_board_data *data = pdata->board_data;
+ int error;
pm_runtime_get_sync(musb->controller);
+
+ dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+ usb_otg_state_string(musb->xceiv->otg->state),
+ musb_readb(musb->mregs, MUSB_DEVCTL));
+
switch (glue->status) {
case MUSB_ID_GROUND:
dev_dbg(musb->controller, "ID GND\n");
-
- musb->xceiv->otg->state = OTG_STATE_A_IDLE;
- musb->xceiv->last_event = USB_EVENT_ID;
- if (musb->gadget_driver) {
- omap_control_usb_set_mode(glue->control_otghs,
- USB_MODE_HOST);
- omap2430_musb_set_vbus(musb, 1);
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_IDLE:
+ error = musb_set_host(musb);
+ if (error)
+ break;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ fallthrough;
+ case OTG_STATE_A_WAIT_VRISE:
+ case OTG_STATE_A_WAIT_BCON:
+ case OTG_STATE_A_HOST:
+ /*
+ * On multiple ID ground interrupts just keep enabling
+ * VBUS. At least cpcap VBUS shuts down otherwise.
+ */
+ otg_set_vbus(musb->xceiv->otg, 1);
+ break;
+ default:
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ musb->xceiv->last_event = USB_EVENT_ID;
+ if (musb->gadget_driver) {
+ omap_control_usb_set_mode(glue->control_otghs,
+ USB_MODE_HOST);
+ otg_set_vbus(musb->xceiv->otg, 1);
+ }
+ break;
}
break;
@@ -174,12 +139,8 @@
dev_dbg(musb->controller, "VBUS Disconnect\n");
musb->xceiv->last_event = USB_EVENT_NONE;
- if (musb->gadget_driver)
- omap2430_musb_set_vbus(musb, 0);
-
- if (data->interface_type == MUSB_INTERFACE_UTMI)
- otg_set_vbus(musb->xceiv->otg, 0);
-
+ musb_set_peripheral(musb);
+ otg_set_vbus(musb->xceiv->otg, 0);
omap_control_usb_set_mode(glue->control_otghs,
USB_MODE_DISCONNECT);
break;
@@ -226,7 +187,6 @@
u32 l;
int status = 0;
struct device *dev = musb->controller;
- struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
struct omap_musb_board_data *data = plat->board_data;
@@ -282,50 +242,17 @@
musb_readl(musb->mregs, OTG_INTERFSEL),
musb_readl(musb->mregs, OTG_SIMENABLE));
- if (glue->status != MUSB_UNKNOWN)
- omap_musb_set_mailbox(glue);
-
return 0;
}
static void omap2430_musb_enable(struct musb *musb)
{
- u8 devctl;
- unsigned long timeout = jiffies + msecs_to_jiffies(1000);
struct device *dev = musb->controller;
struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
- struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev);
- struct omap_musb_board_data *data = pdata->board_data;
-
- switch (glue->status) {
-
- case MUSB_ID_GROUND:
- omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
- if (data->interface_type != MUSB_INTERFACE_UTMI)
- break;
- devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
- /* start the session */
- devctl |= MUSB_DEVCTL_SESSION;
- musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
- while (musb_readb(musb->mregs, MUSB_DEVCTL) &
- MUSB_DEVCTL_BDEVICE) {
- cpu_relax();
-
- if (time_after(jiffies, timeout)) {
- dev_err(dev, "configured as A device timeout");
- break;
- }
- }
- break;
-
- case MUSB_VBUS_VALID:
- omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
- break;
-
- default:
- break;
- }
+ if (glue->status == MUSB_UNKNOWN)
+ glue->status = MUSB_VBUS_OFF;
+ omap_musb_set_mailbox(glue);
}
static void omap2430_musb_disable(struct musb *musb)
@@ -433,6 +360,7 @@
control_node = of_parse_phandle(np, "ctrl-module", 0);
if (control_node) {
control_pdev = of_find_device_by_node(control_node);
+ of_node_put(control_node);
if (!control_pdev) {
dev_err(&pdev->dev, "Failed to get control device\n");
ret = -EINVAL;
@@ -529,6 +457,9 @@
omap2430_low_level_exit(musb);
+ phy_power_off(musb->phy);
+ phy_exit(musb->phy);
+
return 0;
}
@@ -540,10 +471,16 @@
if (!musb)
return 0;
+ phy_init(musb->phy);
+ phy_power_on(musb->phy);
+
omap2430_low_level_init(musb);
musb_writel(musb->mregs, OTG_INTERFSEL,
musb->context.otg_interfsel);
+ /* Wait for musb to get oriented. Otherwise we can get babble */
+ usleep_range(200000, 250000);
+
return 0;
}
--
Gitblit v1.6.2