From 1c055e55a242a33e574e48be530e06770a210dcd Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 19 Feb 2024 03:26:26 +0000
Subject: [PATCH] add r8169 read mac form eeprom
---
kernel/drivers/tty/serial/sa1100.c | 77 +++++++++++++++++++++++++++-----------
1 files changed, 54 insertions(+), 23 deletions(-)
diff --git a/kernel/drivers/tty/serial/sa1100.c b/kernel/drivers/tty/serial/sa1100.c
index a399772..aa1cf2a 100644
--- a/kernel/drivers/tty/serial/sa1100.c
+++ b/kernel/drivers/tty/serial/sa1100.c
@@ -7,10 +7,6 @@
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*/
-#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
@@ -27,6 +23,8 @@
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
+
+#include "serial_mctrl_gpio.h"
/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_SA1100_MAJOR 204
@@ -77,6 +75,7 @@
struct uart_port port;
struct timer_list timer;
unsigned int old_status;
+ struct mctrl_gpios *gpios;
};
/*
@@ -174,6 +173,8 @@
container_of(port, struct sa1100_port, port);
mod_timer(&sport->timer, jiffies);
+
+ mctrl_gpio_enable_ms(sport->gpios);
}
static void
@@ -209,9 +210,7 @@
else if (status & UTSR1_TO_SM(UTSR1_FRE))
flg = TTY_FRAME;
-#ifdef SUPPORT_SYSRQ
sport->port.sysrq = 0;
-#endif
}
if (uart_handle_sysrq_char(&sport->port, ch))
@@ -322,11 +321,21 @@
static unsigned int sa1100_get_mctrl(struct uart_port *port)
{
- return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+ struct sa1100_port *sport =
+ container_of(port, struct sa1100_port, port);
+ int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+ mctrl_gpio_get(sport->gpios, &ret);
+
+ return ret;
}
static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
+ struct sa1100_port *sport =
+ container_of(port, struct sa1100_port, port);
+
+ mctrl_gpio_set(sport->gpios, mctrl);
}
/*
@@ -439,6 +448,8 @@
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
+ del_timer_sync(&sport->timer);
+
spin_lock_irqsave(&sport->port.lock, flags);
sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS);
@@ -468,8 +479,6 @@
sport->port.ignore_status_mask |=
UTSR1_TO_SM(UTSR1_ROR);
}
-
- del_timer_sync(&sport->timer);
/*
* Update the per-port timeout.
@@ -842,26 +851,48 @@
return 0;
}
+static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev)
+{
+ sport->port.dev = &dev->dev;
+ sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SA1100_CONSOLE);
+
+ // mctrl_gpio_init() requires that the GPIO driver supports interrupts,
+ // but we need to support GPIO drivers for hardware that has no such
+ // interrupts. Use mctrl_gpio_init_noauto() instead.
+ sport->gpios = mctrl_gpio_init_noauto(sport->port.dev, 0);
+ if (IS_ERR(sport->gpios)) {
+ int err = PTR_ERR(sport->gpios);
+
+ dev_err(sport->port.dev, "failed to get mctrl gpios: %d\n",
+ err);
+
+ if (err == -EPROBE_DEFER)
+ return err;
+
+ sport->gpios = NULL;
+ }
+
+ platform_set_drvdata(dev, sport);
+
+ return uart_add_one_port(&sa1100_reg, &sport->port);
+}
+
static int sa1100_serial_probe(struct platform_device *dev)
{
- struct resource *res = dev->resource;
+ struct resource *res;
int i;
- for (i = 0; i < dev->num_resources; i++, res++)
- if (res->flags & IORESOURCE_MEM)
- break;
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
- if (i < dev->num_resources) {
- for (i = 0; i < NR_PORTS; i++) {
- if (sa1100_ports[i].port.mapbase != res->start)
- continue;
-
- sa1100_ports[i].port.dev = &dev->dev;
- uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port);
- platform_set_drvdata(dev, &sa1100_ports[i]);
+ for (i = 0; i < NR_PORTS; i++)
+ if (sa1100_ports[i].port.mapbase == res->start)
break;
- }
- }
+ if (i == NR_PORTS)
+ return -ENODEV;
+
+ sa1100_serial_add_one_port(&sa1100_ports[i], dev);
return 0;
}
--
Gitblit v1.6.2