From 1c055e55a242a33e574e48be530e06770a210dcd Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Mon, 19 Feb 2024 03:26:26 +0000
Subject: [PATCH] add r8169 read mac form eeprom
---
kernel/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h | 79 ++++++---------------------------------
1 files changed, 12 insertions(+), 67 deletions(-)
diff --git a/kernel/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h b/kernel/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h
index 8c2f77f..0ef29f1 100644
--- a/kernel/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h
+++ b/kernel/drivers/net/wireless/mediatek/mt76/mt76x0/mcu.h
@@ -1,78 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#ifndef __MT76X0U_MCU_H
#define __MT76X0U_MCU_H
-struct mt76x0_dev;
+#include "../mt76x02_mcu.h"
-/* Register definitions */
-#define MT_MCU_RESET_CTL 0x070C
-#define MT_MCU_INT_LEVEL 0x0718
-#define MT_MCU_COM_REG0 0x0730
-#define MT_MCU_COM_REG1 0x0734
-#define MT_MCU_COM_REG2 0x0738
-#define MT_MCU_COM_REG3 0x073C
+struct mt76x02_dev;
#define MT_MCU_IVB_SIZE 0x40
#define MT_MCU_DLM_OFFSET 0x80000
-#define MT_MCU_MEMMAP_WLAN 0x00410000
/* We use same space for BBP as for MAC regs
* #define MT_MCU_MEMMAP_BBP 0x40000000
*/
#define MT_MCU_MEMMAP_RF 0x80000000
-
-#define INBAND_PACKET_MAX_LEN 192
-
-enum mcu_cmd {
- CMD_FUN_SET_OP = 1,
- CMD_LOAD_CR = 2,
- CMD_INIT_GAIN_OP = 3,
- CMD_DYNC_VGA_OP = 6,
- CMD_TDLS_CH_SW = 7,
- CMD_BURST_WRITE = 8,
- CMD_READ_MODIFY_WRITE = 9,
- CMD_RANDOM_READ = 10,
- CMD_BURST_READ = 11,
- CMD_RANDOM_WRITE = 12,
- CMD_LED_MODE_OP = 16,
- CMD_POWER_SAVING_OP = 20,
- CMD_WOW_CONFIG = 21,
- CMD_WOW_QUERY = 22,
- CMD_WOW_FEATURE = 24,
- CMD_CARRIER_DETECT_OP = 28,
- CMD_RADOR_DETECT_OP = 29,
- CMD_SWITCH_CHANNEL_OP = 30,
- CMD_CALIBRATION_OP = 31,
- CMD_BEACON_OP = 32,
- CMD_ANTENNA_OP = 33,
-};
-
-enum mcu_function {
- Q_SELECT = 1,
- BW_SETTING = 2,
- ATOMIC_TSSI_SETTING = 5,
-};
-
-enum mcu_power_mode {
- RADIO_OFF = 0x30,
- RADIO_ON = 0x31,
- RADIO_OFF_AUTO_WAKEUP = 0x32,
- RADIO_OFF_ADVANCE = 0x33,
- RADIO_ON_ADVANCE = 0x34,
-};
enum mcu_calibrate {
MCU_CAL_R = 1,
@@ -86,16 +31,16 @@
MCU_CAL_TXDCOC,
MCU_CAL_RX_GROUP_DELAY,
MCU_CAL_TX_GROUP_DELAY,
+ MCU_CAL_VCO,
+ MCU_CAL_NO_SIGNAL = 0xfe,
+ MCU_CAL_FULL = 0xff,
};
-int mt76x0_mcu_init(struct mt76x0_dev *dev);
-int mt76x0_mcu_cmd_init(struct mt76x0_dev *dev);
-void mt76x0_mcu_cmd_deinit(struct mt76x0_dev *dev);
-
-int
-mt76x0_mcu_calibrate(struct mt76x0_dev *dev, enum mcu_calibrate cal, u32 val);
-
-int
-mt76x0_mcu_function_select(struct mt76x0_dev *dev, enum mcu_function func, u32 val);
+int mt76x0e_mcu_init(struct mt76x02_dev *dev);
+int mt76x0u_mcu_init(struct mt76x02_dev *dev);
+static inline int mt76x0_firmware_running(struct mt76x02_dev *dev)
+{
+ return mt76_rr(dev, MT_MCU_COM_REG0) == 1;
+}
#endif
--
Gitblit v1.6.2