From 1543e317f1da31b75942316931e8f491a8920811 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 04 Jan 2024 10:08:02 +0000
Subject: [PATCH] disable FB
---
kernel/drivers/tty/serial/8250/8250_of.c | 55 ++++++++++++++++---------------------------------------
1 files changed, 16 insertions(+), 39 deletions(-)
diff --git a/kernel/drivers/tty/serial/8250/8250_of.c b/kernel/drivers/tty/serial/8250/8250_of.c
index a76533a..5595c63 100644
--- a/kernel/drivers/tty/serial/8250/8250_of.c
+++ b/kernel/drivers/tty/serial/8250/8250_of.c
@@ -7,7 +7,6 @@
#include <linux/console.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/delay.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/of_address.h>
@@ -26,37 +25,16 @@
int line;
};
-#ifdef CONFIG_ARCH_TEGRA
-static void tegra_serial_handle_break(struct uart_port *p)
-{
- unsigned int status, tmout = 10000;
-
- do {
- status = p->serial_in(p, UART_LSR);
- if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
- status = p->serial_in(p, UART_RX);
- else
- break;
- if (--tmout == 0)
- break;
- udelay(1);
- } while (1);
-}
-#else
-static inline void tegra_serial_handle_break(struct uart_port *port)
-{
-}
-#endif
-
/*
* Fill a struct uart_port for a given device node
*/
static int of_platform_serial_setup(struct platform_device *ofdev,
- int type, struct uart_port *port,
+ int type, struct uart_8250_port *up,
struct of_serial_info *info)
{
struct resource resource;
struct device_node *np = ofdev->dev.of_node;
+ struct uart_port *port = &up->port;
u32 clk, spd, prop;
int ret, irq;
@@ -70,9 +48,10 @@
/* Get clk rate through clk driver if present */
info->clk = devm_clk_get(&ofdev->dev, NULL);
if (IS_ERR(info->clk)) {
- dev_warn(&ofdev->dev,
- "clk or clock-frequency not defined\n");
ret = PTR_ERR(info->clk);
+ if (ret != -EPROBE_DEFER)
+ dev_warn(&ofdev->dev,
+ "failed to get clock: %d\n", ret);
goto err_pmruntime;
}
@@ -185,12 +164,11 @@
port->flags |= UPF_SKIP_TEST;
port->dev = &ofdev->dev;
+ port->rs485_config = serial8250_em485_config;
+ up->rs485_start_tx = serial8250_em485_start_tx;
+ up->rs485_stop_tx = serial8250_em485_stop_tx;
switch (type) {
- case PORT_TEGRA:
- port->handle_break = tegra_serial_handle_break;
- break;
-
case PORT_RT2880:
port->iotype = UPIO_AU;
break;
@@ -198,8 +176,10 @@
if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) &&
(of_device_is_compatible(np, "fsl,ns16550") ||
- of_device_is_compatible(np, "fsl,16550-FIFO64")))
+ of_device_is_compatible(np, "fsl,16550-FIFO64"))) {
port->handle_irq = fsl8250_handle_irq;
+ port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+ }
return 0;
err_unprepare:
@@ -213,18 +193,16 @@
/*
* Try to register a serial port
*/
-static const struct of_device_id of_platform_serial_table[];
static int of_platform_serial_probe(struct platform_device *ofdev)
{
- const struct of_device_id *match;
struct of_serial_info *info;
struct uart_8250_port port8250;
+ unsigned int port_type;
u32 tx_threshold;
- int port_type;
int ret;
- match = of_match_device(of_platform_serial_table, &ofdev->dev);
- if (!match)
+ port_type = (unsigned long)of_device_get_match_data(&ofdev->dev);
+ if (port_type == PORT_UNKNOWN)
return -EINVAL;
if (of_property_read_bool(ofdev->dev.of_node, "used-by-rtas"))
@@ -234,9 +212,8 @@
if (info == NULL)
return -ENOMEM;
- port_type = (unsigned long)match->data;
memset(&port8250, 0, sizeof(port8250));
- ret = of_platform_serial_setup(ofdev, port_type, &port8250.port, info);
+ ret = of_platform_serial_setup(ofdev, port_type, &port8250, info);
if (ret)
goto err_free;
@@ -336,9 +313,9 @@
{ .compatible = "ns16550", .data = (void *)PORT_16550, },
{ .compatible = "ns16750", .data = (void *)PORT_16750, },
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
- { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
{ .compatible = "ralink,rt2880-uart", .data = (void *)PORT_RT2880, },
+ { .compatible = "intel,xscale-uart", .data = (void *)PORT_XSCALE, },
{ .compatible = "altr,16550-FIFO32",
.data = (void *)PORT_ALTR_16550_F32, },
{ .compatible = "altr,16550-FIFO64",
--
Gitblit v1.6.2