From 1543e317f1da31b75942316931e8f491a8920811 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 04 Jan 2024 10:08:02 +0000
Subject: [PATCH] disable FB
---
kernel/drivers/thermal/qcom/tsens-v1.c | 63 +++++++++++++++----------------
1 files changed, 31 insertions(+), 32 deletions(-)
diff --git a/kernel/drivers/thermal/qcom/tsens-v1.c b/kernel/drivers/thermal/qcom/tsens-v1.c
index 3c19a38..faa4576 100644
--- a/kernel/drivers/thermal/qcom/tsens-v1.c
+++ b/kernel/drivers/thermal/qcom/tsens-v1.c
@@ -78,11 +78,6 @@
#define MSM8976_CAL_SEL_MASK 0x3
-#define MSM8976_CAL_DEGC_PT1 30
-#define MSM8976_CAL_DEGC_PT2 120
-#define MSM8976_SLOPE_FACTOR 1000
-#define MSM8976_SLOPE_DEFAULT 3200
-
/* eeprom layout data for qcs404/405 (v1) */
#define BASE0_MASK 0x000007f8
#define BASE1_MASK 0x0007f800
@@ -141,30 +136,6 @@
#define CAL_SEL_MASK 7
#define CAL_SEL_SHIFT 0
-
-static void compute_intercept_slope_8976(struct tsens_priv *priv,
- u32 *p1, u32 *p2, u32 mode)
-{
- int i;
-
- priv->sensor[0].slope = 3313;
- priv->sensor[1].slope = 3275;
- priv->sensor[2].slope = 3320;
- priv->sensor[3].slope = 3246;
- priv->sensor[4].slope = 3279;
- priv->sensor[5].slope = 3257;
- priv->sensor[6].slope = 3234;
- priv->sensor[7].slope = 3269;
- priv->sensor[8].slope = 3255;
- priv->sensor[9].slope = 3239;
- priv->sensor[10].slope = 3286;
-
- for (i = 0; i < priv->num_sensors; i++) {
- priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) -
- (MSM8976_CAL_DEGC_PT1 *
- priv->sensor[i].slope);
- }
-}
static int calibrate_v1(struct tsens_priv *priv)
{
@@ -291,7 +262,7 @@
break;
}
- compute_intercept_slope_8976(priv, p1, p2, mode);
+ compute_intercept_slope(priv, p1, p2, mode);
kfree(qfprom_cdata);
return 0;
@@ -362,6 +333,22 @@
[TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0),
};
+static int __init init_8956(struct tsens_priv *priv) {
+ priv->sensor[0].slope = 3313;
+ priv->sensor[1].slope = 3275;
+ priv->sensor[2].slope = 3320;
+ priv->sensor[3].slope = 3246;
+ priv->sensor[4].slope = 3279;
+ priv->sensor[5].slope = 3257;
+ priv->sensor[6].slope = 3234;
+ priv->sensor[7].slope = 3269;
+ priv->sensor[8].slope = 3255;
+ priv->sensor[9].slope = 3239;
+ priv->sensor[10].slope = 3286;
+
+ return init_common(priv);
+}
+
static const struct tsens_ops ops_generic_v1 = {
.init = init_common,
.calibrate = calibrate_v1,
@@ -374,17 +361,29 @@
.fields = tsens_v1_regfields,
};
+static const struct tsens_ops ops_8956 = {
+ .init = init_8956,
+ .calibrate = calibrate_8976,
+ .get_temp = get_temp_tsens_valid,
+};
+
+struct tsens_plat_data data_8956 = {
+ .num_sensors = 11,
+ .ops = &ops_8956,
+ .feat = &tsens_v1_feat,
+ .fields = tsens_v1_regfields,
+};
+
static const struct tsens_ops ops_8976 = {
.init = init_common,
.calibrate = calibrate_8976,
.get_temp = get_temp_tsens_valid,
};
-/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
struct tsens_plat_data data_8976 = {
.num_sensors = 11,
.ops = &ops_8976,
- .hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
+ .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
.feat = &tsens_v1_feat,
.fields = tsens_v1_regfields,
};
--
Gitblit v1.6.2