From 1543e317f1da31b75942316931e8f491a8920811 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 04 Jan 2024 10:08:02 +0000
Subject: [PATCH] disable FB
---
kernel/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 142 +++++++++++++++++++++++++++++++++-------------
1 files changed, 101 insertions(+), 41 deletions(-)
diff --git a/kernel/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/kernel/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 0c30f5e..1744138 100644
--- a/kernel/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/kernel/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1,17 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
@@ -136,7 +129,6 @@
/**
* struct pmic_gpio_pad - keep current GPIO settings
* @base: Address base in SPMI device.
- * @irq: IRQ number which this GPIO generate.
* @is_enabled: Set to false when GPIO should be put in high Z state.
* @out_value: Cached pin output value
* @have_buffer: Set to true if GPIO output could be configured in push-pull,
@@ -156,7 +148,6 @@
*/
struct pmic_gpio_pad {
u16 base;
- int irq;
bool is_enabled;
bool out_value;
bool have_buffer;
@@ -179,6 +170,7 @@
struct regmap *map;
struct pinctrl_dev *ctrl;
struct gpio_chip chip;
+ struct irq_chip irq;
};
static const struct pinconf_generic_params pmic_gpio_bindings[] = {
@@ -674,11 +666,11 @@
else
seq_printf(s, " %-4s",
pad->output_enabled ? "out" : "in");
+ seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
seq_printf(s, " %-7s", pmic_gpio_functions[function]);
seq_printf(s, " vin-%d", pad->power_source);
seq_printf(s, " %-27s", biases[pad->pullup]);
seq_printf(s, " %-10s", buffer_types[pad->buffer_type]);
- seq_printf(s, " %-4s", pad->out_value ? "high" : "low");
seq_printf(s, " %-7s", strengths[pad->strength]);
seq_printf(s, " atest-%d", pad->atest);
seq_printf(s, " dtest-%d", pad->dtest_buffer);
@@ -758,16 +750,6 @@
return gpio_desc->args[0] - PMIC_GPIO_PHYSICAL_OFFSET;
}
-static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
-{
- struct pmic_gpio_state *state = gpiochip_get_data(chip);
- struct pmic_gpio_pad *pad;
-
- pad = state->ctrl->desc->pins[pin].drv_data;
-
- return pad->irq;
-}
-
static void pmic_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct pmic_gpio_state *state = gpiochip_get_data(chip);
@@ -787,7 +769,6 @@
.request = gpiochip_generic_request,
.free = gpiochip_generic_free,
.of_xlate = pmic_gpio_of_xlate,
- .to_irq = pmic_gpio_to_irq,
.dbg_show = pmic_gpio_dbg_show,
};
@@ -813,11 +794,13 @@
switch (subtype) {
case PMIC_GPIO_SUBTYPE_GPIO_4CH:
pad->have_buffer = true;
+ fallthrough;
case PMIC_GPIO_SUBTYPE_GPIOC_4CH:
pad->num_sources = 4;
break;
case PMIC_GPIO_SUBTYPE_GPIO_8CH:
pad->have_buffer = true;
+ fallthrough;
case PMIC_GPIO_SUBTYPE_GPIOC_8CH:
pad->num_sources = 8;
break;
@@ -935,13 +918,53 @@
return 0;
}
+static int pmic_gpio_domain_translate(struct irq_domain *domain,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
+{
+ struct pmic_gpio_state *state = container_of(domain->host_data,
+ struct pmic_gpio_state,
+ chip);
+
+ if (fwspec->param_count != 2 ||
+ fwspec->param[0] < 1 || fwspec->param[0] > state->chip.ngpio)
+ return -EINVAL;
+
+ *hwirq = fwspec->param[0] - PMIC_GPIO_PHYSICAL_OFFSET;
+ *type = fwspec->param[1];
+
+ return 0;
+}
+
+static unsigned int pmic_gpio_child_offset_to_irq(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ return offset + PMIC_GPIO_PHYSICAL_OFFSET;
+}
+
+static int pmic_gpio_child_to_parent_hwirq(struct gpio_chip *chip,
+ unsigned int child_hwirq,
+ unsigned int child_type,
+ unsigned int *parent_hwirq,
+ unsigned int *parent_type)
+{
+ *parent_hwirq = child_hwirq + 0xc0;
+ *parent_type = child_type;
+
+ return 0;
+}
+
static int pmic_gpio_probe(struct platform_device *pdev)
{
+ struct irq_domain *parent_domain;
+ struct device_node *parent_node;
struct device *dev = &pdev->dev;
struct pinctrl_pin_desc *pindesc;
struct pinctrl_desc *pctrldesc;
struct pmic_gpio_pad *pad, *pads;
struct pmic_gpio_state *state;
+ struct gpio_irq_chip *girq;
int ret, npins, i;
u32 reg;
@@ -951,13 +974,7 @@
return ret;
}
- npins = platform_irq_count(pdev);
- if (!npins)
- return -EINVAL;
- if (npins < 0)
- return npins;
-
- BUG_ON(npins > ARRAY_SIZE(pmic_gpio_groups));
+ npins = (uintptr_t) device_get_match_data(&pdev->dev);
state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
if (!state)
@@ -999,10 +1016,6 @@
pindesc->number = i;
pindesc->name = pmic_gpio_groups[i];
- pad->irq = platform_get_irq(pdev, i);
- if (pad->irq < 0)
- return pad->irq;
-
pad->base = reg + i * PMIC_GPIO_ADDRESS_RANGE;
ret = pmic_gpio_populate(state, pad);
@@ -1021,6 +1034,34 @@
state->ctrl = devm_pinctrl_register(dev, pctrldesc, state);
if (IS_ERR(state->ctrl))
return PTR_ERR(state->ctrl);
+
+ parent_node = of_irq_find_parent(state->dev->of_node);
+ if (!parent_node)
+ return -ENXIO;
+
+ parent_domain = irq_find_host(parent_node);
+ of_node_put(parent_node);
+ if (!parent_domain)
+ return -ENXIO;
+
+ state->irq.name = "spmi-gpio",
+ state->irq.irq_ack = irq_chip_ack_parent,
+ state->irq.irq_mask = irq_chip_mask_parent,
+ state->irq.irq_unmask = irq_chip_unmask_parent,
+ state->irq.irq_set_type = irq_chip_set_type_parent,
+ state->irq.irq_set_wake = irq_chip_set_wake_parent,
+ state->irq.flags = IRQCHIP_MASK_ON_SUSPEND,
+
+ girq = &state->chip.irq;
+ girq->chip = &state->irq;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_level_irq;
+ girq->fwnode = of_node_to_fwnode(state->dev->of_node);
+ girq->parent_domain = parent_domain;
+ girq->child_to_parent_hwirq = pmic_gpio_child_to_parent_hwirq;
+ girq->populate_parent_alloc_arg = gpiochip_populate_parent_fwspec_fourcell;
+ girq->child_offset_to_irq = pmic_gpio_child_offset_to_irq;
+ girq->child_irq_domain_ops.translate = pmic_gpio_domain_translate;
ret = gpiochip_add_data(&state->chip, state);
if (ret) {
@@ -1063,12 +1104,31 @@
}
static const struct of_device_id pmic_gpio_of_match[] = {
- { .compatible = "qcom,pm8916-gpio" }, /* 4 GPIO's */
- { .compatible = "qcom,pm8941-gpio" }, /* 36 GPIO's */
- { .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */
- { .compatible = "qcom,pmi8994-gpio" }, /* 10 GPIO's */
- { .compatible = "qcom,pma8084-gpio" }, /* 22 GPIO's */
- { .compatible = "qcom,spmi-gpio" }, /* Generic */
+ { .compatible = "qcom,pm8005-gpio", .data = (void *) 4 },
+ { .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
+ { .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
+ /* pm8950 has 8 GPIOs with holes on 3 */
+ { .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
+ { .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 },
+ { .compatible = "qcom,pm8994-gpio", .data = (void *) 22 },
+ { .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pm8998-gpio", .data = (void *) 26 },
+ { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
+ { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 },
+ /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
+ { .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
+ /* pm660 has 13 GPIOs with holes on 1, 5, 6, 7, 8 and 10 */
+ { .compatible = "qcom,pm660-gpio", .data = (void *) 13 },
+ /* pm660l has 12 GPIOs with holes on 1, 2, 10, 11 and 12 */
+ { .compatible = "qcom,pm660l-gpio", .data = (void *) 12 },
+ /* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */
+ { .compatible = "qcom,pm8150-gpio", .data = (void *) 10 },
+ /* pm8150b has 12 GPIOs with holes on 3, r and 7 */
+ { .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 },
+ /* pm8150l has 12 GPIOs with holes on 7 */
+ { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 },
+ { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 },
+ { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 },
{ },
};
--
Gitblit v1.6.2