From 1543e317f1da31b75942316931e8f491a8920811 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 04 Jan 2024 10:08:02 +0000
Subject: [PATCH] disable FB
---
kernel/drivers/phy/ti/phy-twl4030-usb.c | 50 ++++++++++++++------------------------------------
1 files changed, 14 insertions(+), 36 deletions(-)
diff --git a/kernel/drivers/phy/ti/phy-twl4030-usb.c b/kernel/drivers/phy/ti/phy-twl4030-usb.c
index ea75643..812e540 100644
--- a/kernel/drivers/phy/ti/phy-twl4030-usb.c
+++ b/kernel/drivers/phy/ti/phy-twl4030-usb.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
*
* Copyright (C) 2004-2007 Texas Instruments
* Copyright (C) 2008 Nokia Corporation
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Current status:
* - HS USB ULPI mode works.
@@ -172,6 +159,7 @@
int irq;
enum musb_vbus_id_status linkstat;
+ atomic_t connected;
bool vbus_supplied;
bool musb_mailbox_pending;
@@ -575,39 +563,29 @@
{
struct twl4030_usb *twl = _twl;
enum musb_vbus_id_status status;
- bool status_changed = false;
int err;
status = twl4030_usb_linkstat(twl);
mutex_lock(&twl->lock);
- if (status >= 0 && status != twl->linkstat) {
- status_changed =
- cable_present(twl->linkstat) !=
- cable_present(status);
- twl->linkstat = status;
- }
+ twl->linkstat = status;
mutex_unlock(&twl->lock);
- if (status_changed) {
- /* FIXME add a set_power() method so that B-devices can
- * configure the charger appropriately. It's not always
- * correct to consume VBUS power, and how much current to
- * consume is a function of the USB configuration chosen
- * by the host.
- *
- * REVISIT usb_gadget_vbus_connect(...) as needed, ditto
- * its disconnect() sibling, when changing to/from the
- * USB_LINK_VBUS state. musb_hdrc won't care until it
- * starts to handle softconnect right.
- */
- if (cable_present(status)) {
+ if (cable_present(status)) {
+ if (atomic_add_unless(&twl->connected, 1, 1)) {
+ dev_dbg(twl->dev, "%s: cable connected %i\n",
+ __func__, status);
pm_runtime_get_sync(twl->dev);
- } else {
+ twl->musb_mailbox_pending = true;
+ }
+ } else {
+ if (atomic_add_unless(&twl->connected, -1, 0)) {
+ dev_dbg(twl->dev, "%s: cable disconnected %i\n",
+ __func__, status);
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put_autosuspend(twl->dev);
+ twl->musb_mailbox_pending = true;
}
- twl->musb_mailbox_pending = true;
}
if (twl->musb_mailbox_pending) {
err = musb_mailbox(status);
--
Gitblit v1.6.2