From 1543e317f1da31b75942316931e8f491a8920811 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 04 Jan 2024 10:08:02 +0000
Subject: [PATCH] disable FB
---
kernel/drivers/net/phy/icplus.c | 168 ++++++++++++++++++++++++++++++++++++++++++++-----------
1 files changed, 133 insertions(+), 35 deletions(-)
diff --git a/kernel/drivers/net/phy/icplus.c b/kernel/drivers/net/phy/icplus.c
index 791587a..d6e8516 100644
--- a/kernel/drivers/net/phy/icplus.c
+++ b/kernel/drivers/net/phy/icplus.c
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for ICPlus PHYs
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
*/
#include <linux/kernel.h>
#include <linux/string.h>
@@ -25,6 +20,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/property.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -36,14 +32,34 @@
/* IP101A/G - IP1001 */
#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
-#define IP1001_RXPHASE_SEL (1<<0) /* Add delay on RX_CLK */
-#define IP1001_TXPHASE_SEL (1<<1) /* Add delay on TX_CLK */
+#define IP1001_RXPHASE_SEL BIT(0) /* Add delay on RX_CLK */
+#define IP1001_TXPHASE_SEL BIT(1) /* Add delay on TX_CLK */
#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
-#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
+#define IP101A_G_APS_ON BIT(1) /* IP101A/G APS Mode bit */
#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
-#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */
-#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED
+#define IP101A_G_IRQ_PIN_USED BIT(15) /* INTR pin used */
+#define IP101A_G_IRQ_ALL_MASK BIT(11) /* IRQ's inactive */
+#define IP101A_G_IRQ_SPEED_CHANGE BIT(2)
+#define IP101A_G_IRQ_DUPLEX_CHANGE BIT(1)
+#define IP101A_G_IRQ_LINK_CHANGE BIT(0)
+
+#define IP101G_DIGITAL_IO_SPEC_CTRL 0x1d
+#define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32 BIT(2)
+
+/* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin
+ * (pin number 21). The hardware default is RXER (receive error) mode. But it
+ * can be configured to interrupt mode manually.
+ */
+enum ip101gr_sel_intr32 {
+ IP101GR_SEL_INTR32_KEEP,
+ IP101GR_SEL_INTR32_INTR,
+ IP101GR_SEL_INTR32_RXER,
+};
+
+struct ip101a_g_phy_priv {
+ enum ip101gr_sel_intr32 sel_intr32;
+};
static int ip175c_config_init(struct phy_device *phydev)
{
@@ -162,26 +178,6 @@
return 0;
}
-static int ip101a_g_config_init(struct phy_device *phydev)
-{
- int c;
-
- c = ip1xx_reset(phydev);
- if (c < 0)
- return c;
-
- /* INTR pin used: speed/link/duplex will cause an interrupt */
- c = phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, IP101A_G_IRQ_DEFAULT);
- if (c < 0)
- return c;
-
- /* Enable Auto Power Saving mode */
- c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
- c |= IP101A_G_APS_ON;
-
- return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
-}
-
static int ip175c_read_status(struct phy_device *phydev)
{
if (phydev->mdio.addr == 4) /* WAN port */
@@ -201,6 +197,106 @@
return 0;
}
+static int ip101a_g_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct ip101a_g_phy_priv *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ /* Both functions (RX error and interrupt status) are sharing the same
+ * pin on the 32-pin IP101GR, so this is an exclusive choice.
+ */
+ if (device_property_read_bool(dev, "icplus,select-rx-error") &&
+ device_property_read_bool(dev, "icplus,select-interrupt")) {
+ dev_err(dev,
+ "RXER and INTR mode cannot be selected together\n");
+ return -EINVAL;
+ }
+
+ if (device_property_read_bool(dev, "icplus,select-rx-error"))
+ priv->sel_intr32 = IP101GR_SEL_INTR32_RXER;
+ else if (device_property_read_bool(dev, "icplus,select-interrupt"))
+ priv->sel_intr32 = IP101GR_SEL_INTR32_INTR;
+ else
+ priv->sel_intr32 = IP101GR_SEL_INTR32_KEEP;
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static int ip101a_g_config_init(struct phy_device *phydev)
+{
+ struct ip101a_g_phy_priv *priv = phydev->priv;
+ int err, c;
+
+ c = ip1xx_reset(phydev);
+ if (c < 0)
+ return c;
+
+ /* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
+ switch (priv->sel_intr32) {
+ case IP101GR_SEL_INTR32_RXER:
+ err = phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL,
+ IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0);
+ if (err < 0)
+ return err;
+ break;
+
+ case IP101GR_SEL_INTR32_INTR:
+ err = phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL,
+ IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32,
+ IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32);
+ if (err < 0)
+ return err;
+ break;
+
+ default:
+ /* Don't touch IP101G_DIGITAL_IO_SPEC_CTRL because it's not
+ * documented on IP101A and it's not clear whether this would
+ * cause problems.
+ * For the 32-pin IP101GR we simply keep the SEL_INTR32
+ * configuration as set by the bootloader when not configured
+ * to one of the special functions.
+ */
+ break;
+ }
+
+ /* Enable Auto Power Saving mode */
+ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
+ c |= IP101A_G_APS_ON;
+
+ return phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
+}
+
+static int ip101a_g_config_intr(struct phy_device *phydev)
+{
+ u16 val;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ /* INTR pin used: Speed/link/duplex will cause an interrupt */
+ val = IP101A_G_IRQ_PIN_USED;
+ else
+ val = IP101A_G_IRQ_ALL_MASK;
+
+ return phy_write(phydev, IP101A_G_IRQ_CONF_STATUS, val);
+}
+
+static int ip101a_g_did_interrupt(struct phy_device *phydev)
+{
+ int val = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
+
+ if (val < 0)
+ return 0;
+
+ return val & (IP101A_G_IRQ_SPEED_CHANGE |
+ IP101A_G_IRQ_DUPLEX_CHANGE |
+ IP101A_G_IRQ_LINK_CHANGE);
+}
+
static int ip101a_g_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS);
@@ -215,7 +311,7 @@
.phy_id = 0x02430d80,
.name = "ICPlus IP175C",
.phy_id_mask = 0x0ffffff0,
- .features = PHY_BASIC_FEATURES,
+ /* PHY_BASIC_FEATURES */
.config_init = &ip175c_config_init,
.config_aneg = &ip175c_config_aneg,
.read_status = &ip175c_read_status,
@@ -225,7 +321,7 @@
.phy_id = 0x02430d90,
.name = "ICPlus IP1001",
.phy_id_mask = 0x0ffffff0,
- .features = PHY_GBIT_FEATURES,
+ /* PHY_GBIT_FEATURES */
.config_init = &ip1001_config_init,
.suspend = genphy_suspend,
.resume = genphy_resume,
@@ -233,8 +329,10 @@
.phy_id = 0x02430c54,
.name = "ICPlus IP101A/G",
.phy_id_mask = 0x0ffffff0,
- .features = PHY_BASIC_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
+ /* PHY_BASIC_FEATURES */
+ .probe = ip101a_g_probe,
+ .config_intr = ip101a_g_config_intr,
+ .did_interrupt = ip101a_g_did_interrupt,
.ack_interrupt = ip101a_g_ack_interrupt,
.config_init = &ip101a_g_config_init,
.suspend = genphy_suspend,
--
Gitblit v1.6.2