From 1543e317f1da31b75942316931e8f491a8920811 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 04 Jan 2024 10:08:02 +0000
Subject: [PATCH] disable FB
---
kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 318 +++++++++++++++++++++++++++++++++++++---------------
1 files changed, 225 insertions(+), 93 deletions(-)
diff --git a/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 093a223..8a29921 100644
--- a/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -1,32 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*******************************************************************************
STMMAC Ethernet Driver -- MDIO bus implementation
Provides Bus interface for MII registers
Copyright (C) 2007-2009 STMicroelectronics Ltd
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
Author: Carl Shaw <carl.shaw@st.com>
Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
+#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/mii.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_mdio.h>
+#include <linux/pm_runtime.h>
#include <linux/phy.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include "dwxgmac2.h"
@@ -34,11 +25,14 @@
#define MII_BUSY 0x00000001
#define MII_WRITE 0x00000002
+#define MII_DATA_MASK GENMASK(15, 0)
/* GMAC4 defines */
#define MII_GMAC4_GOC_SHIFT 2
+#define MII_GMAC4_REG_ADDR_SHIFT 16
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
+#define MII_GMAC4_C45E BIT(1)
/* XGMAC defines */
#define MII_XGMAC_SADDR BIT(18)
@@ -48,20 +42,32 @@
#define MII_XGMAC_BUSY BIT(22)
#define MII_XGMAC_MAX_C22ADDR 3
#define MII_XGMAC_C22P_MASK GENMASK(MII_XGMAC_MAX_C22ADDR, 0)
+#define MII_XGMAC_PA_SHIFT 16
+#define MII_XGMAC_DA_SHIFT 21
+
+static int stmmac_xgmac2_c45_format(struct stmmac_priv *priv, int phyaddr,
+ int phyreg, u32 *hw_addr)
+{
+ u32 tmp;
+
+ /* Set port as Clause 45 */
+ tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
+ tmp &= ~BIT(phyaddr);
+ writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);
+
+ *hw_addr = (phyaddr << MII_XGMAC_PA_SHIFT) | (phyreg & 0xffff);
+ *hw_addr |= (phyreg >> MII_DEVADDR_C45_SHIFT) << MII_XGMAC_DA_SHIFT;
+ return 0;
+}
static int stmmac_xgmac2_c22_format(struct stmmac_priv *priv, int phyaddr,
int phyreg, u32 *hw_addr)
{
- unsigned int mii_data = priv->hw->mii.data;
u32 tmp;
/* HW does not support C22 addr >= 4 */
if (phyaddr > MII_XGMAC_MAX_C22ADDR)
return -ENODEV;
- /* Wait until any existing MII operation is complete */
- if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
/* Set port as Clause 22 */
tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
@@ -69,7 +75,7 @@
tmp |= BIT(phyaddr);
writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);
- *hw_addr = (phyaddr << 16) | (phyreg & 0x1f);
+ *hw_addr = (phyaddr << MII_XGMAC_PA_SHIFT) | (phyreg & 0x1f);
return 0;
}
@@ -82,22 +88,43 @@
u32 tmp, addr, value = MII_XGMAC_BUSY;
int ret;
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
+
+ /* Wait until any existing MII operation is complete */
+ if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
+
if (phyreg & MII_ADDR_C45) {
- return -EOPNOTSUPP;
+ phyreg &= ~MII_ADDR_C45;
+
+ ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr);
+ if (ret)
+ goto err_disable_clks;
} else {
ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
if (ret)
- return ret;
+ goto err_disable_clks;
+
+ value |= MII_XGMAC_SADDR;
}
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- value |= MII_XGMAC_SADDR | MII_XGMAC_READ;
+ value |= MII_XGMAC_READ;
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Set the MII address register to read */
writel(addr, priv->ioaddr + mii_address);
@@ -105,11 +132,18 @@
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Read the data from the MII data register */
- return readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
+ ret = (int)readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
+
+err_disable_clks:
+ pm_runtime_put(priv->device);
+
+ return ret;
}
static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
@@ -122,31 +156,57 @@
u32 addr, tmp, value = MII_XGMAC_BUSY;
int ret;
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
+
+ /* Wait until any existing MII operation is complete */
+ if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
+
if (phyreg & MII_ADDR_C45) {
- return -EOPNOTSUPP;
+ phyreg &= ~MII_ADDR_C45;
+
+ ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr);
+ if (ret)
+ goto err_disable_clks;
} else {
ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
if (ret)
- return ret;
+ goto err_disable_clks;
+
+ value |= MII_XGMAC_SADDR;
}
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- value |= phydata | MII_XGMAC_SADDR;
+ value |= phydata;
value |= MII_XGMAC_WRITE;
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000))
- return -EBUSY;
+ !(tmp & MII_XGMAC_BUSY), 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Set the MII address register to write */
writel(addr, priv->ioaddr + mii_address);
writel(value, priv->ioaddr + mii_data);
/* Wait until any existing MII operation is complete */
- return readl_poll_timeout(priv->ioaddr + mii_data, tmp,
- !(tmp & MII_XGMAC_BUSY), 100, 10000);
+ ret = readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+ !(tmp & MII_XGMAC_BUSY), 100, 10000);
+
+err_disable_clks:
+ pm_runtime_put(priv->device);
+
+ return ret;
}
/**
@@ -165,30 +225,55 @@
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 v;
- int data;
u32 value = MII_BUSY;
+ int data = 0;
+ u32 v;
+
+ data = pm_runtime_get_sync(priv->device);
+ if (data < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return data;
+ }
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4) {
value |= MII_GMAC4_READ;
+ if (phyreg & MII_ADDR_C45) {
+ value |= MII_GMAC4_C45E;
+ value &= ~priv->hw->mii.reg_mask;
+ value |= ((phyreg >> MII_DEVADDR_C45_SHIFT) <<
+ priv->hw->mii.reg_shift) &
+ priv->hw->mii.reg_mask;
+
+ data |= (phyreg & MII_REGADDR_C45_MASK) <<
+ MII_GMAC4_REG_ADDR_SHIFT;
+ }
+ }
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
- 100, 10000))
- return -EBUSY;
+ 100, 10000)) {
+ data = -EBUSY;
+ goto err_disable_clks;
+ }
+ writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
- 100, 10000))
- return -EBUSY;
+ 100, 10000)) {
+ data = -EBUSY;
+ goto err_disable_clks;
+ }
/* Read the data from the MII data register */
- data = (int)readl(priv->ioaddr + mii_data);
+ data = (int)readl(priv->ioaddr + mii_data) & MII_DATA_MASK;
+
+err_disable_clks:
+ pm_runtime_put(priv->device);
return data;
}
@@ -208,8 +293,15 @@
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
- u32 v;
+ int ret, data = phydata;
u32 value = MII_BUSY;
+ u32 v;
+
+ ret = pm_runtime_get_sync(priv->device);
+ if (ret < 0) {
+ pm_runtime_put_noidle(priv->device);
+ return ret;
+ }
value |= (phyaddr << priv->hw->mii.addr_shift)
& priv->hw->mii.addr_mask;
@@ -217,23 +309,41 @@
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
- if (priv->plat->has_gmac4)
+ if (priv->plat->has_gmac4) {
value |= MII_GMAC4_WRITE;
- else
+ if (phyreg & MII_ADDR_C45) {
+ value |= MII_GMAC4_C45E;
+ value &= ~priv->hw->mii.reg_mask;
+ value |= ((phyreg >> MII_DEVADDR_C45_SHIFT) <<
+ priv->hw->mii.reg_shift) &
+ priv->hw->mii.reg_mask;
+
+ data |= (phyreg & MII_REGADDR_C45_MASK) <<
+ MII_GMAC4_REG_ADDR_SHIFT;
+ }
+ } else {
value |= MII_WRITE;
+ }
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
- 100, 10000))
- return -EBUSY;
+ 100, 10000)) {
+ ret = -EBUSY;
+ goto err_disable_clks;
+ }
/* Set the MII address register to write */
- writel(phydata, priv->ioaddr + mii_data);
+ writel(data, priv->ioaddr + mii_data);
writel(value, priv->ioaddr + mii_address);
/* Wait until any existing MII operation is complete */
- return readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
- 100, 10000);
+ ret = readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
+ 100, 10000);
+
+err_disable_clks:
+ pm_runtime_put(priv->device);
+
+ return ret;
}
/**
@@ -247,50 +357,34 @@
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
- struct stmmac_mdio_bus_data *data = priv->plat->mdio_bus_data;
#ifdef CONFIG_OF
if (priv->device->of_node) {
- if (data->reset_gpio < 0) {
- struct device_node *np = priv->device->of_node;
+ struct gpio_desc *reset_gpio;
+ u32 delays[3] = { 0, 0, 0 };
- if (!np)
- return 0;
+ reset_gpio = devm_gpiod_get_optional(priv->device,
+ "snps,reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(reset_gpio))
+ return PTR_ERR(reset_gpio);
- data->reset_gpio = of_get_named_gpio(np,
- "snps,reset-gpio", 0);
- if (data->reset_gpio < 0)
- return 0;
+ device_property_read_u32_array(priv->device,
+ "snps,reset-delays-us",
+ delays, ARRAY_SIZE(delays));
- data->active_low = of_property_read_bool(np,
- "snps,reset-active-low");
- of_property_read_u32_array(np,
- "snps,reset-delays-us", data->delays, 3);
+ if (delays[0])
+ msleep(DIV_ROUND_UP(delays[0], 1000));
- if (devm_gpio_request(priv->device, data->reset_gpio,
- "mdio-reset"))
- return 0;
- }
+ gpiod_set_value_cansleep(reset_gpio, 1);
+ if (delays[1])
+ msleep(DIV_ROUND_UP(delays[1], 1000));
- gpio_direction_output(data->reset_gpio,
- data->active_low ? 1 : 0);
- if (data->delays[0])
- msleep(DIV_ROUND_UP(data->delays[0], 1000));
-
- gpio_set_value(data->reset_gpio, data->active_low ? 0 : 1);
- if (data->delays[1])
- msleep(DIV_ROUND_UP(data->delays[1], 1000));
-
- gpio_set_value(data->reset_gpio, data->active_low ? 1 : 0);
- if (data->delays[2])
- msleep(DIV_ROUND_UP(data->delays[2], 1000));
+ gpiod_set_value_cansleep(reset_gpio, 0);
+ if (delays[2])
+ msleep(DIV_ROUND_UP(delays[2], 1000));
}
#endif
-
- if (data->phy_reset) {
- netdev_dbg(ndev, "stmmac_mdio_reset: calling phy_reset\n");
- data->phy_reset(priv->plat->bsp_priv);
- }
/* This is a workaround for problems with the STE101P PHY.
* It doesn't complete its reset until at least one clock cycle
@@ -302,6 +396,7 @@
#endif
return 0;
}
+EXPORT_SYMBOL(stmmac_mdio_reset);
/**
* stmmac_mdio_register
@@ -328,11 +423,6 @@
if (mdio_bus_data->irqs)
memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));
-#ifdef CONFIG_OF
- if (priv->device->of_node)
- mdio_bus_data->reset_gpio = -1;
-#endif
-
new_bus->name = "stmmac";
if (priv->plat->has_xgmac) {
@@ -352,7 +442,17 @@
max_addr = PHY_MAX_ADDR;
}
- new_bus->reset = &stmmac_mdio_reset;
+ if (mdio_bus_data->has_xpcs) {
+ priv->hw->xpcs = mdio_xpcs_get_ops();
+ if (!priv->hw->xpcs) {
+ err = -ENODEV;
+ goto bus_register_fail;
+ }
+ }
+
+ if (mdio_bus_data->needs_reset)
+ new_bus->reset = &stmmac_mdio_reset;
+
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
new_bus->name, priv->plat->bus_id);
new_bus->priv = ndev;
@@ -364,6 +464,10 @@
dev_err(dev, "Cannot register the MDIO bus\n");
goto bus_register_fail;
}
+
+ /* Looks like we need a dummy read for XGMAC only and C45 PHYs */
+ if (priv->plat->has_xgmac)
+ stmmac_xgmac2_mdio_read(new_bus, 0, MII_ADDR_C45);
if (priv->plat->phy_node || mdio_node)
goto bus_register_done;
@@ -399,9 +503,34 @@
if (!found && !mdio_node) {
dev_warn(dev, "No PHY found\n");
- mdiobus_unregister(new_bus);
- mdiobus_free(new_bus);
- return -ENODEV;
+ err = -ENODEV;
+ goto no_phy_found;
+ }
+
+ /* Try to probe the XPCS by scanning all addresses. */
+ if (priv->hw->xpcs) {
+ struct mdio_xpcs_args *xpcs = &priv->hw->xpcs_args;
+ int ret, mode = priv->plat->phy_interface;
+ max_addr = PHY_MAX_ADDR;
+
+ xpcs->bus = new_bus;
+
+ found = 0;
+ for (addr = 0; addr < max_addr; addr++) {
+ xpcs->addr = addr;
+
+ ret = stmmac_xpcs_probe(priv, xpcs, mode);
+ if (!ret) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found && !mdio_node) {
+ dev_warn(dev, "No XPCS found\n");
+ err = -ENODEV;
+ goto no_xpcs_found;
+ }
}
bus_register_done:
@@ -409,6 +538,9 @@
return 0;
+no_xpcs_found:
+no_phy_found:
+ mdiobus_unregister(new_bus);
bus_register_fail:
mdiobus_free(new_bus);
return err;
--
Gitblit v1.6.2