From 1543e317f1da31b75942316931e8f491a8920811 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Thu, 04 Jan 2024 10:08:02 +0000
Subject: [PATCH] disable FB
---
kernel/drivers/media/i2c/ov5640.c | 1318 +++++++++++++++++++++++++++++++++++++----------------------
1 files changed, 818 insertions(+), 500 deletions(-)
diff --git a/kernel/drivers/media/i2c/ov5640.c b/kernel/drivers/media/i2c/ov5640.c
index aa9c0b7..db4b609 100644
--- a/kernel/drivers/media/i2c/ov5640.c
+++ b/kernel/drivers/media/i2c/ov5640.c
@@ -1,11 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2014-2017 Mentor Graphics Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#include <linux/clk.h>
@@ -25,6 +21,7 @@
#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
#include <media/v4l2-fwnode.h>
#include <media/v4l2-subdev.h>
@@ -37,6 +34,8 @@
#define OV5640_REG_SYS_RESET02 0x3002
#define OV5640_REG_SYS_CLOCK_ENABLE02 0x3006
#define OV5640_REG_SYS_CTRL0 0x3008
+#define OV5640_REG_SYS_CTRL0_SW_PWDN 0x42
+#define OV5640_REG_SYS_CTRL0_SW_PWUP 0x02
#define OV5640_REG_CHIP_ID 0x300a
#define OV5640_REG_IO_MIPI_CTRL00 0x300e
#define OV5640_REG_PAD_OUTPUT_ENABLE01 0x3017
@@ -82,6 +81,10 @@
#define OV5640_REG_SIGMADELTA_CTRL0C 0x3c0c
#define OV5640_REG_FRAME_CTRL01 0x4202
#define OV5640_REG_FORMAT_CONTROL00 0x4300
+#define OV5640_REG_VFIFO_HSIZE 0x4602
+#define OV5640_REG_VFIFO_VSIZE 0x4604
+#define OV5640_REG_JPG_MODE_SELECT 0x4713
+#define OV5640_REG_CCIR656_CTRL00 0x4730
#define OV5640_REG_POLARITY_CTRL00 0x4740
#define OV5640_REG_MIPI_CTRL00 0x4800
#define OV5640_REG_DEBUG_MODE 0x4814
@@ -93,9 +96,6 @@
#define OV5640_REG_SDE_CTRL4 0x5584
#define OV5640_REG_SDE_CTRL5 0x5585
#define OV5640_REG_AVG_READOUT 0x56a1
-
-#define OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT 1
-#define OV5640_SCLK_ROOT_DIVIDER_DEFAULT 2
enum ov5640_mode_id {
OV5640_MODE_QCIF_176_144 = 0,
@@ -113,7 +113,17 @@
enum ov5640_frame_rate {
OV5640_15_FPS = 0,
OV5640_30_FPS,
+ OV5640_60_FPS,
OV5640_NUM_FRAMERATES,
+};
+
+enum ov5640_format_mux {
+ OV5640_FMT_MUX_YUV422 = 0,
+ OV5640_FMT_MUX_RGB,
+ OV5640_FMT_MUX_DITHER,
+ OV5640_FMT_MUX_RAW_DPC,
+ OV5640_FMT_MUX_SNR_RAW,
+ OV5640_FMT_MUX_RAW_CIP,
};
struct ov5640_pixfmt {
@@ -127,6 +137,10 @@
{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB, },
{ MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB, },
+ { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB, },
+ { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_COLORSPACE_SRGB, },
+ { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_COLORSPACE_SRGB, },
+ { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_COLORSPACE_SRGB, },
};
/*
@@ -141,13 +155,14 @@
static const int ov5640_framerates[] = {
[OV5640_15_FPS] = 15,
[OV5640_30_FPS] = 30,
+ [OV5640_60_FPS] = 60,
};
/* regulator supplies */
static const char * const ov5640_supply_name[] = {
"DOVDD", /* Digital I/O (1.8V) supply */
- "DVDD", /* Digital Core (1.5V) supply */
"AVDD", /* Analog (2.8V) supply */
+ "DVDD", /* Digital Core (1.5V) supply */
};
#define OV5640_NUM_SUPPLIES ARRAY_SIZE(ov5640_supply_name)
@@ -177,10 +192,12 @@
u32 vtot;
const struct reg_value *reg_data;
u32 reg_data_size;
+ u32 max_fps;
};
struct ov5640_ctrls {
struct v4l2_ctrl_handler handler;
+ struct v4l2_ctrl *pixel_rate;
struct {
struct v4l2_ctrl *auto_exp;
struct v4l2_ctrl *exposure;
@@ -260,9 +277,7 @@
/* YUV422 UYVY VGA@30fps */
static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
{0x3103, 0x11, 0, 0}, {0x3008, 0x82, 0, 5}, {0x3008, 0x42, 0, 0},
- {0x3103, 0x03, 0, 0}, {0x3017, 0x00, 0, 0}, {0x3018, 0x00, 0, 0},
- {0x3034, 0x18, 0, 0}, {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0},
- {0x3037, 0x13, 0, 0}, {0x3630, 0x36, 0, 0},
+ {0x3103, 0x03, 0, 0}, {0x3630, 0x36, 0, 0},
{0x3631, 0x0e, 0, 0}, {0x3632, 0xe2, 0, 0}, {0x3633, 0x12, 0, 0},
{0x3621, 0xe0, 0, 0}, {0x3704, 0xa0, 0, 0}, {0x3703, 0x5a, 0, 0},
{0x3715, 0x78, 0, 0}, {0x3717, 0x01, 0, 0}, {0x370b, 0x60, 0, 0},
@@ -289,7 +304,7 @@
{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x3000, 0x00, 0, 0},
{0x3002, 0x1c, 0, 0}, {0x3004, 0xff, 0, 0}, {0x3006, 0xc3, 0, 0},
{0x302e, 0x08, 0, 0}, {0x4300, 0x3f, 0, 0},
- {0x501f, 0x00, 0, 0}, {0x4713, 0x03, 0, 0}, {0x4407, 0x04, 0, 0},
+ {0x501f, 0x00, 0, 0}, {0x4407, 0x04, 0, 0},
{0x440e, 0x00, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x4837, 0x0a, 0, 0}, {0x3824, 0x02, 0, 0},
{0x5000, 0xa7, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x5180, 0xff, 0, 0},
@@ -344,27 +359,8 @@
{0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3c00, 0x04, 0, 300},
};
-static const struct reg_value ov5640_setting_30fps_VGA_640_480[] = {
- {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3814, 0x31, 0, 0},
- {0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
- {0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
- {0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
- {0x3810, 0x00, 0, 0},
- {0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
- {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
- {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
- {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x0e, 0, 0},
- {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
- {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x3503, 0x00, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_VGA_640_480[] = {
- {0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+static const struct reg_value ov5640_setting_VGA_640_480[] = {
+ {0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -377,33 +373,13 @@
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_30fps_XGA_1024_768[] = {
- {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3814, 0x31, 0, 0},
- {0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
- {0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
- {0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
- {0x3810, 0x00, 0, 0},
- {0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
- {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
- {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
- {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x0e, 0, 0},
- {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
- {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x3503, 0x00, 0, 0},
- {0x3035, 0x12, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_XGA_1024_768[] = {
- {0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+static const struct reg_value ov5640_setting_XGA_1024_768[] = {
+ {0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -416,13 +392,13 @@
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_30fps_QVGA_320_240[] = {
- {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+static const struct reg_value ov5640_setting_QVGA_320_240[] = {
+ {0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -435,13 +411,13 @@
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_15fps_QVGA_320_240[] = {
- {0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+static const struct reg_value ov5640_setting_QCIF_176_144[] = {
+ {0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -454,51 +430,13 @@
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_30fps_QCIF_176_144[] = {
- {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3814, 0x31, 0, 0},
- {0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
- {0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
- {0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
- {0x3810, 0x00, 0, 0},
- {0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
- {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
- {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
- {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
- {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
- {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_QCIF_176_144[] = {
- {0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3814, 0x31, 0, 0},
- {0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
- {0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
- {0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
- {0x3810, 0x00, 0, 0},
- {0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
- {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
- {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
- {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
- {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
- {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_30fps_NTSC_720_480[] = {
- {0x3035, 0x12, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+static const struct reg_value ov5640_setting_NTSC_720_480[] = {
+ {0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -511,32 +449,13 @@
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_15fps_NTSC_720_480[] = {
- {0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3814, 0x31, 0, 0},
- {0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
- {0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
- {0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
- {0x3810, 0x00, 0, 0},
- {0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x3c, 0, 0},
- {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
- {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
- {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
- {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
- {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_30fps_PAL_720_576[] = {
- {0x3035, 0x12, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
+static const struct reg_value ov5640_setting_PAL_720_576[] = {
+ {0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -549,33 +468,13 @@
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
};
-static const struct reg_value ov5640_setting_15fps_PAL_720_576[] = {
- {0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3814, 0x31, 0, 0},
- {0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
- {0x3802, 0x00, 0, 0}, {0x3803, 0x04, 0, 0}, {0x3804, 0x0a, 0, 0},
- {0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9b, 0, 0},
- {0x3810, 0x00, 0, 0},
- {0x3811, 0x38, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x06, 0, 0},
- {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
- {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
- {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
- {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
- {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x03, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_30fps_720P_1280_720[] = {
- {0x3008, 0x42, 0, 0},
- {0x3035, 0x21, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x07, 0, 0},
+static const struct reg_value ov5640_setting_720P_1280_720[] = {
+ {0x3c07, 0x07, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x31, 0, 0},
{0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -588,34 +487,13 @@
{0x3a03, 0xe4, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0xbc, 0, 0},
{0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x72, 0, 0}, {0x3a0e, 0x01, 0, 0},
{0x3a0d, 0x02, 0, 0}, {0x3a14, 0x02, 0, 0}, {0x3a15, 0xe4, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x02, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0},
- {0x3824, 0x04, 0, 0}, {0x5001, 0x83, 0, 0}, {0x4005, 0x1a, 0, 0},
- {0x3008, 0x02, 0, 0}, {0x3503, 0, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_720P_1280_720[] = {
- {0x3035, 0x41, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x07, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3814, 0x31, 0, 0},
- {0x3815, 0x31, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
- {0x3802, 0x00, 0, 0}, {0x3803, 0xfa, 0, 0}, {0x3804, 0x0a, 0, 0},
- {0x3805, 0x3f, 0, 0}, {0x3806, 0x06, 0, 0}, {0x3807, 0xa9, 0, 0},
- {0x3810, 0x00, 0, 0},
- {0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x04, 0, 0},
- {0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
- {0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x02, 0, 0},
- {0x3a03, 0xe4, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0xbc, 0, 0},
- {0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x72, 0, 0}, {0x3a0e, 0x01, 0, 0},
- {0x3a0d, 0x02, 0, 0}, {0x3a14, 0x02, 0, 0}, {0x3a15, 0xe4, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x4713, 0x02, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0},
{0x3824, 0x04, 0, 0}, {0x5001, 0x83, 0, 0},
};
-static const struct reg_value ov5640_setting_30fps_1080P_1920_1080[] = {
- {0x3008, 0x42, 0, 0},
- {0x3035, 0x21, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x08, 0, 0},
+static const struct reg_value ov5640_setting_1080P_1920_1080[] = {
+ {0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x11, 0, 0},
{0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -628,10 +506,10 @@
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0}, {0x4713, 0x03, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0}, {0x3035, 0x11, 0, 0},
- {0x3036, 0x54, 0, 0}, {0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
+ {0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0},
+ {0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3800, 0x01, 0, 0}, {0x3801, 0x50, 0, 0}, {0x3802, 0x01, 0, 0},
{0x3803, 0xb2, 0, 0}, {0x3804, 0x08, 0, 0}, {0x3805, 0xef, 0, 0},
@@ -640,15 +518,13 @@
{0x3a02, 0x04, 0, 0}, {0x3a03, 0x60, 0, 0}, {0x3a08, 0x01, 0, 0},
{0x3a09, 0x50, 0, 0}, {0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x18, 0, 0},
{0x3a0e, 0x03, 0, 0}, {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x04, 0, 0},
- {0x3a15, 0x60, 0, 0}, {0x4713, 0x02, 0, 0}, {0x4407, 0x04, 0, 0},
+ {0x3a15, 0x60, 0, 0}, {0x4407, 0x04, 0, 0},
{0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, {0x3824, 0x04, 0, 0},
- {0x4005, 0x1a, 0, 0}, {0x3008, 0x02, 0, 0},
- {0x3503, 0, 0, 0},
+ {0x4005, 0x1a, 0, 0},
};
-static const struct reg_value ov5640_setting_15fps_1080P_1920_1080[] = {
- {0x3008, 0x42, 0, 0},
- {0x3035, 0x21, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x08, 0, 0},
+static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = {
+ {0x3c07, 0x08, 0, 0},
{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
{0x3814, 0x11, 0, 0},
{0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
@@ -661,38 +537,7 @@
{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0}, {0x4713, 0x03, 0, 0},
- {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
- {0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0}, {0x3035, 0x21, 0, 0},
- {0x3036, 0x54, 0, 1}, {0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3800, 0x01, 0, 0}, {0x3801, 0x50, 0, 0}, {0x3802, 0x01, 0, 0},
- {0x3803, 0xb2, 0, 0}, {0x3804, 0x08, 0, 0}, {0x3805, 0xef, 0, 0},
- {0x3806, 0x05, 0, 0}, {0x3807, 0xf1, 0, 0},
- {0x3612, 0x2b, 0, 0}, {0x3708, 0x64, 0, 0},
- {0x3a02, 0x04, 0, 0}, {0x3a03, 0x60, 0, 0}, {0x3a08, 0x01, 0, 0},
- {0x3a09, 0x50, 0, 0}, {0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x18, 0, 0},
- {0x3a0e, 0x03, 0, 0}, {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x04, 0, 0},
- {0x3a15, 0x60, 0, 0}, {0x4713, 0x02, 0, 0}, {0x4407, 0x04, 0, 0},
- {0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, {0x3824, 0x04, 0, 0},
- {0x4005, 0x1a, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3503, 0, 0, 0},
-};
-
-static const struct reg_value ov5640_setting_15fps_QSXGA_2592_1944[] = {
- {0x3035, 0x21, 0, 0}, {0x3036, 0x54, 0, 0}, {0x3c07, 0x08, 0, 0},
- {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
- {0x3814, 0x11, 0, 0},
- {0x3815, 0x11, 0, 0}, {0x3800, 0x00, 0, 0}, {0x3801, 0x00, 0, 0},
- {0x3802, 0x00, 0, 0}, {0x3803, 0x00, 0, 0}, {0x3804, 0x0a, 0, 0},
- {0x3805, 0x3f, 0, 0}, {0x3806, 0x07, 0, 0}, {0x3807, 0x9f, 0, 0},
- {0x3810, 0x00, 0, 0},
- {0x3811, 0x10, 0, 0}, {0x3812, 0x00, 0, 0}, {0x3813, 0x04, 0, 0},
- {0x3618, 0x04, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x21, 0, 0},
- {0x3709, 0x12, 0, 0}, {0x370c, 0x00, 0, 0}, {0x3a02, 0x03, 0, 0},
- {0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
- {0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
- {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
- {0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0}, {0x4713, 0x03, 0, 0},
+ {0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0},
{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 70},
};
@@ -702,82 +547,56 @@
0, SUBSAMPLING, 640, 1896, 480, 984,
ov5640_init_setting_30fps_VGA,
ARRAY_SIZE(ov5640_init_setting_30fps_VGA),
+ OV5640_30_FPS,
};
static const struct ov5640_mode_info
-ov5640_mode_data[OV5640_NUM_FRAMERATES][OV5640_NUM_MODES] = {
- {
- {OV5640_MODE_QCIF_176_144, SUBSAMPLING,
- 176, 1896, 144, 984,
- ov5640_setting_15fps_QCIF_176_144,
- ARRAY_SIZE(ov5640_setting_15fps_QCIF_176_144)},
- {OV5640_MODE_QVGA_320_240, SUBSAMPLING,
- 320, 1896, 240, 984,
- ov5640_setting_15fps_QVGA_320_240,
- ARRAY_SIZE(ov5640_setting_15fps_QVGA_320_240)},
- {OV5640_MODE_VGA_640_480, SUBSAMPLING,
- 640, 1896, 480, 1080,
- ov5640_setting_15fps_VGA_640_480,
- ARRAY_SIZE(ov5640_setting_15fps_VGA_640_480)},
- {OV5640_MODE_NTSC_720_480, SUBSAMPLING,
- 720, 1896, 480, 984,
- ov5640_setting_15fps_NTSC_720_480,
- ARRAY_SIZE(ov5640_setting_15fps_NTSC_720_480)},
- {OV5640_MODE_PAL_720_576, SUBSAMPLING,
- 720, 1896, 576, 984,
- ov5640_setting_15fps_PAL_720_576,
- ARRAY_SIZE(ov5640_setting_15fps_PAL_720_576)},
- {OV5640_MODE_XGA_1024_768, SUBSAMPLING,
- 1024, 1896, 768, 1080,
- ov5640_setting_15fps_XGA_1024_768,
- ARRAY_SIZE(ov5640_setting_15fps_XGA_1024_768)},
- {OV5640_MODE_720P_1280_720, SUBSAMPLING,
- 1280, 1892, 720, 740,
- ov5640_setting_15fps_720P_1280_720,
- ARRAY_SIZE(ov5640_setting_15fps_720P_1280_720)},
- {OV5640_MODE_1080P_1920_1080, SCALING,
- 1920, 2500, 1080, 1120,
- ov5640_setting_15fps_1080P_1920_1080,
- ARRAY_SIZE(ov5640_setting_15fps_1080P_1920_1080)},
- {OV5640_MODE_QSXGA_2592_1944, SCALING,
- 2592, 2844, 1944, 1968,
- ov5640_setting_15fps_QSXGA_2592_1944,
- ARRAY_SIZE(ov5640_setting_15fps_QSXGA_2592_1944)},
- }, {
- {OV5640_MODE_QCIF_176_144, SUBSAMPLING,
- 176, 1896, 144, 984,
- ov5640_setting_30fps_QCIF_176_144,
- ARRAY_SIZE(ov5640_setting_30fps_QCIF_176_144)},
- {OV5640_MODE_QVGA_320_240, SUBSAMPLING,
- 320, 1896, 240, 984,
- ov5640_setting_30fps_QVGA_320_240,
- ARRAY_SIZE(ov5640_setting_30fps_QVGA_320_240)},
- {OV5640_MODE_VGA_640_480, SUBSAMPLING,
- 640, 1896, 480, 1080,
- ov5640_setting_30fps_VGA_640_480,
- ARRAY_SIZE(ov5640_setting_30fps_VGA_640_480)},
- {OV5640_MODE_NTSC_720_480, SUBSAMPLING,
- 720, 1896, 480, 984,
- ov5640_setting_30fps_NTSC_720_480,
- ARRAY_SIZE(ov5640_setting_30fps_NTSC_720_480)},
- {OV5640_MODE_PAL_720_576, SUBSAMPLING,
- 720, 1896, 576, 984,
- ov5640_setting_30fps_PAL_720_576,
- ARRAY_SIZE(ov5640_setting_30fps_PAL_720_576)},
- {OV5640_MODE_XGA_1024_768, SUBSAMPLING,
- 1024, 1896, 768, 1080,
- ov5640_setting_30fps_XGA_1024_768,
- ARRAY_SIZE(ov5640_setting_30fps_XGA_1024_768)},
- {OV5640_MODE_720P_1280_720, SUBSAMPLING,
- 1280, 1892, 720, 740,
- ov5640_setting_30fps_720P_1280_720,
- ARRAY_SIZE(ov5640_setting_30fps_720P_1280_720)},
- {OV5640_MODE_1080P_1920_1080, SCALING,
- 1920, 2500, 1080, 1120,
- ov5640_setting_30fps_1080P_1920_1080,
- ARRAY_SIZE(ov5640_setting_30fps_1080P_1920_1080)},
- {OV5640_MODE_QSXGA_2592_1944, -1, 0, 0, 0, 0, NULL, 0},
- },
+ov5640_mode_data[OV5640_NUM_MODES] = {
+ {OV5640_MODE_QCIF_176_144, SUBSAMPLING,
+ 176, 1896, 144, 984,
+ ov5640_setting_QCIF_176_144,
+ ARRAY_SIZE(ov5640_setting_QCIF_176_144),
+ OV5640_30_FPS},
+ {OV5640_MODE_QVGA_320_240, SUBSAMPLING,
+ 320, 1896, 240, 984,
+ ov5640_setting_QVGA_320_240,
+ ARRAY_SIZE(ov5640_setting_QVGA_320_240),
+ OV5640_30_FPS},
+ {OV5640_MODE_VGA_640_480, SUBSAMPLING,
+ 640, 1896, 480, 1080,
+ ov5640_setting_VGA_640_480,
+ ARRAY_SIZE(ov5640_setting_VGA_640_480),
+ OV5640_60_FPS},
+ {OV5640_MODE_NTSC_720_480, SUBSAMPLING,
+ 720, 1896, 480, 984,
+ ov5640_setting_NTSC_720_480,
+ ARRAY_SIZE(ov5640_setting_NTSC_720_480),
+ OV5640_30_FPS},
+ {OV5640_MODE_PAL_720_576, SUBSAMPLING,
+ 720, 1896, 576, 984,
+ ov5640_setting_PAL_720_576,
+ ARRAY_SIZE(ov5640_setting_PAL_720_576),
+ OV5640_30_FPS},
+ {OV5640_MODE_XGA_1024_768, SUBSAMPLING,
+ 1024, 1896, 768, 1080,
+ ov5640_setting_XGA_1024_768,
+ ARRAY_SIZE(ov5640_setting_XGA_1024_768),
+ OV5640_30_FPS},
+ {OV5640_MODE_720P_1280_720, SUBSAMPLING,
+ 1280, 1892, 720, 740,
+ ov5640_setting_720P_1280_720,
+ ARRAY_SIZE(ov5640_setting_720P_1280_720),
+ OV5640_30_FPS},
+ {OV5640_MODE_1080P_1920_1080, SCALING,
+ 1920, 2500, 1080, 1120,
+ ov5640_setting_1080P_1920_1080,
+ ARRAY_SIZE(ov5640_setting_1080P_1920_1080),
+ OV5640_30_FPS},
+ {OV5640_MODE_QSXGA_2592_1944, SCALING,
+ 2592, 2844, 1944, 1968,
+ ov5640_setting_QSXGA_2592_1944,
+ ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944),
+ OV5640_15_FPS},
};
static int ov5640_init_slave_id(struct ov5640_dev *sensor)
@@ -909,11 +728,368 @@
return ov5640_write_reg(sensor, reg, val);
}
+/*
+ * After trying the various combinations, reading various
+ * documentations spread around the net, and from the various
+ * feedback, the clock tree is probably as follows:
+ *
+ * +--------------+
+ * | Ext. Clock |
+ * +-+------------+
+ * | +----------+
+ * +->| PLL1 | - reg 0x3036, for the multiplier
+ * +-+--------+ - reg 0x3037, bits 0-3 for the pre-divider
+ * | +--------------+
+ * +->| System Clock | - reg 0x3035, bits 4-7
+ * +-+------------+
+ * | +--------------+
+ * +->| MIPI Divider | - reg 0x3035, bits 0-3
+ * | +-+------------+
+ * | +----------------> MIPI SCLK
+ * | + +-----+
+ * | +->| / 2 |-------> MIPI BIT CLK
+ * | +-----+
+ * | +--------------+
+ * +->| PLL Root Div | - reg 0x3037, bit 4
+ * +-+------------+
+ * | +---------+
+ * +->| Bit Div | - reg 0x3034, bits 0-3
+ * +-+-------+
+ * | +-------------+
+ * +->| SCLK Div | - reg 0x3108, bits 0-1
+ * | +-+-----------+
+ * | +---------------> SCLK
+ * | +-------------+
+ * +->| SCLK 2X Div | - reg 0x3108, bits 2-3
+ * | +-+-----------+
+ * | +---------------> SCLK 2X
+ * | +-------------+
+ * +->| PCLK Div | - reg 0x3108, bits 4-5
+ * ++------------+
+ * + +-----------+
+ * +->| P_DIV | - reg 0x3035, bits 0-3
+ * +-----+-----+
+ * +------------> PCLK
+ *
+ * This is deviating from the datasheet at least for the register
+ * 0x3108, since it's said here that the PCLK would be clocked from
+ * the PLL.
+ *
+ * There seems to be also (unverified) constraints:
+ * - the PLL pre-divider output rate should be in the 4-27MHz range
+ * - the PLL multiplier output rate should be in the 500-1000MHz range
+ * - PCLK >= SCLK * 2 in YUV, >= SCLK in Raw or JPEG
+ *
+ * In the two latter cases, these constraints are met since our
+ * factors are hardcoded. If we were to change that, we would need to
+ * take this into account. The only varying parts are the PLL
+ * multiplier and the system clock divider, which are shared between
+ * all these clocks so won't cause any issue.
+ */
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 3 in the vendor kernels.
+ */
+#define OV5640_PLL_PREDIV 3
+
+#define OV5640_PLL_MULT_MIN 4
+#define OV5640_PLL_MULT_MAX 252
+
+/*
+ * This is supposed to be ranging from 1 to 16, but the value is
+ * always set to either 1 or 2 in the vendor kernels.
+ */
+#define OV5640_SYSDIV_MIN 1
+#define OV5640_SYSDIV_MAX 16
+
+/*
+ * Hardcode these values for scaler and non-scaler modes.
+ * FIXME: to be re-calcualted for 1 data lanes setups
+ */
+#define OV5640_MIPI_DIV_PCLK 2
+#define OV5640_MIPI_DIV_SCLK 1
+
+/*
+ * This is supposed to be ranging from 1 to 2, but the value is always
+ * set to 2 in the vendor kernels.
+ */
+#define OV5640_PLL_ROOT_DIV 2
+#define OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 BIT(4)
+
+/*
+ * We only supports 8-bit formats at the moment
+ */
+#define OV5640_BIT_DIV 2
+#define OV5640_PLL_CTRL0_MIPI_MODE_8BIT 0x08
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 2 in the vendor kernels.
+ */
+#define OV5640_SCLK_ROOT_DIV 2
+
+/*
+ * This is hardcoded so that the consistency is maintained between SCLK and
+ * SCLK 2x.
+ */
+#define OV5640_SCLK2X_ROOT_DIV (OV5640_SCLK_ROOT_DIV / 2)
+
+/*
+ * This is supposed to be ranging from 1 to 8, but the value is always
+ * set to 1 in the vendor kernels.
+ */
+#define OV5640_PCLK_ROOT_DIV 1
+#define OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS 0x00
+
+static unsigned long ov5640_compute_sys_clk(struct ov5640_dev *sensor,
+ u8 pll_prediv, u8 pll_mult,
+ u8 sysdiv)
+{
+ unsigned long sysclk = sensor->xclk_freq / pll_prediv * pll_mult;
+
+ /* PLL1 output cannot exceed 1GHz. */
+ if (sysclk / 1000000 > 1000)
+ return 0;
+
+ return sysclk / sysdiv;
+}
+
+static unsigned long ov5640_calc_sys_clk(struct ov5640_dev *sensor,
+ unsigned long rate,
+ u8 *pll_prediv, u8 *pll_mult,
+ u8 *sysdiv)
+{
+ unsigned long best = ~0;
+ u8 best_sysdiv = 1, best_mult = 1;
+ u8 _sysdiv, _pll_mult;
+
+ for (_sysdiv = OV5640_SYSDIV_MIN;
+ _sysdiv <= OV5640_SYSDIV_MAX;
+ _sysdiv++) {
+ for (_pll_mult = OV5640_PLL_MULT_MIN;
+ _pll_mult <= OV5640_PLL_MULT_MAX;
+ _pll_mult++) {
+ unsigned long _rate;
+
+ /*
+ * The PLL multiplier cannot be odd if above
+ * 127.
+ */
+ if (_pll_mult > 127 && (_pll_mult % 2))
+ continue;
+
+ _rate = ov5640_compute_sys_clk(sensor,
+ OV5640_PLL_PREDIV,
+ _pll_mult, _sysdiv);
+
+ /*
+ * We have reached the maximum allowed PLL1 output,
+ * increase sysdiv.
+ */
+ if (!_rate)
+ break;
+
+ /*
+ * Prefer rates above the expected clock rate than
+ * below, even if that means being less precise.
+ */
+ if (_rate < rate)
+ continue;
+
+ if (abs(rate - _rate) < abs(rate - best)) {
+ best = _rate;
+ best_sysdiv = _sysdiv;
+ best_mult = _pll_mult;
+ }
+
+ if (_rate == rate)
+ goto out;
+ }
+ }
+
+out:
+ *sysdiv = best_sysdiv;
+ *pll_prediv = OV5640_PLL_PREDIV;
+ *pll_mult = best_mult;
+
+ return best;
+}
+
+/*
+ * ov5640_set_mipi_pclk() - Calculate the clock tree configuration values
+ * for the MIPI CSI-2 output.
+ *
+ * @rate: The requested bandwidth per lane in bytes per second.
+ * 'Bandwidth Per Lane' is calculated as:
+ * bpl = HTOT * VTOT * FPS * bpp / num_lanes;
+ *
+ * This function use the requested bandwidth to calculate:
+ * - sample_rate = bpl / (bpp / num_lanes);
+ * = bpl / (PLL_RDIV * BIT_DIV * PCLK_DIV * MIPI_DIV / num_lanes);
+ *
+ * - mipi_sclk = bpl / MIPI_DIV / 2; ( / 2 is for CSI-2 DDR)
+ *
+ * with these fixed parameters:
+ * PLL_RDIV = 2;
+ * BIT_DIVIDER = 2; (MIPI_BIT_MODE == 8 ? 2 : 2,5);
+ * PCLK_DIV = 1;
+ *
+ * The MIPI clock generation differs for modes that use the scaler and modes
+ * that do not. In case the scaler is in use, the MIPI_SCLK generates the MIPI
+ * BIT CLk, and thus:
+ *
+ * - mipi_sclk = bpl / MIPI_DIV / 2;
+ * MIPI_DIV = 1;
+ *
+ * For modes that do not go through the scaler, the MIPI BIT CLOCK is generated
+ * from the pixel clock, and thus:
+ *
+ * - sample_rate = bpl / (bpp / num_lanes);
+ * = bpl / (2 * 2 * 1 * MIPI_DIV / num_lanes);
+ * = bpl / (4 * MIPI_DIV / num_lanes);
+ * - MIPI_DIV = bpp / (4 * num_lanes);
+ *
+ * FIXME: this have been tested with 16bpp and 2 lanes setup only.
+ * MIPI_DIV is fixed to value 2, but it -might- be changed according to the
+ * above formula for setups with 1 lane or image formats with different bpp.
+ *
+ * FIXME: this deviates from the sensor manual documentation which is quite
+ * thin on the MIPI clock tree generation part.
+ */
+static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor,
+ unsigned long rate)
+{
+ const struct ov5640_mode_info *mode = sensor->current_mode;
+ u8 prediv, mult, sysdiv;
+ u8 mipi_div;
+ int ret;
+
+ /*
+ * 1280x720 is reported to use 'SUBSAMPLING' only,
+ * but according to the sensor manual it goes through the
+ * scaler before subsampling.
+ */
+ if (mode->dn_mode == SCALING ||
+ (mode->id == OV5640_MODE_720P_1280_720))
+ mipi_div = OV5640_MIPI_DIV_SCLK;
+ else
+ mipi_div = OV5640_MIPI_DIV_PCLK;
+
+ ov5640_calc_sys_clk(sensor, rate, &prediv, &mult, &sysdiv);
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
+ 0x0f, OV5640_PLL_CTRL0_MIPI_MODE_8BIT);
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
+ 0xff, sysdiv << 4 | mipi_div);
+ if (ret)
+ return ret;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2, 0xff, mult);
+ if (ret)
+ return ret;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
+ 0x1f, OV5640_PLL_CTRL3_PLL_ROOT_DIV_2 | prediv);
+ if (ret)
+ return ret;
+
+ return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER,
+ 0x30, OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS);
+}
+
+static unsigned long ov5640_calc_pclk(struct ov5640_dev *sensor,
+ unsigned long rate,
+ u8 *pll_prediv, u8 *pll_mult, u8 *sysdiv,
+ u8 *pll_rdiv, u8 *bit_div, u8 *pclk_div)
+{
+ unsigned long _rate = rate * OV5640_PLL_ROOT_DIV * OV5640_BIT_DIV *
+ OV5640_PCLK_ROOT_DIV;
+
+ _rate = ov5640_calc_sys_clk(sensor, _rate, pll_prediv, pll_mult,
+ sysdiv);
+ *pll_rdiv = OV5640_PLL_ROOT_DIV;
+ *bit_div = OV5640_BIT_DIV;
+ *pclk_div = OV5640_PCLK_ROOT_DIV;
+
+ return _rate / *pll_rdiv / *bit_div / *pclk_div;
+}
+
+static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor, unsigned long rate)
+{
+ u8 prediv, mult, sysdiv, pll_rdiv, bit_div, pclk_div;
+ int ret;
+
+ ov5640_calc_pclk(sensor, rate, &prediv, &mult, &sysdiv, &pll_rdiv,
+ &bit_div, &pclk_div);
+
+ if (bit_div == 2)
+ bit_div = 8;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
+ 0x0f, bit_div);
+ if (ret)
+ return ret;
+
+ /*
+ * We need to set sysdiv according to the clock, and to clear
+ * the MIPI divider.
+ */
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
+ 0xff, sysdiv << 4);
+ if (ret)
+ return ret;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2,
+ 0xff, mult);
+ if (ret)
+ return ret;
+
+ ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
+ 0x1f, prediv | ((pll_rdiv - 1) << 4));
+ if (ret)
+ return ret;
+
+ return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x30,
+ (ilog2(pclk_div) << 4));
+}
+
+/* set JPEG framing sizes */
+static int ov5640_set_jpeg_timings(struct ov5640_dev *sensor,
+ const struct ov5640_mode_info *mode)
+{
+ int ret;
+
+ /*
+ * compression mode 3 timing
+ *
+ * Data is transmitted with programmable width (VFIFO_HSIZE).
+ * No padding done. Last line may have less data. Varying
+ * number of lines per frame, depending on amount of data.
+ */
+ ret = ov5640_mod_reg(sensor, OV5640_REG_JPG_MODE_SELECT, 0x7, 0x3);
+ if (ret < 0)
+ return ret;
+
+ ret = ov5640_write_reg16(sensor, OV5640_REG_VFIFO_HSIZE, mode->hact);
+ if (ret < 0)
+ return ret;
+
+ return ov5640_write_reg16(sensor, OV5640_REG_VFIFO_VSIZE, mode->vact);
+}
+
/* download ov5640 settings to sensor through i2c */
static int ov5640_set_timings(struct ov5640_dev *sensor,
const struct ov5640_mode_info *mode)
{
int ret;
+
+ if (sensor->fmt.code == MEDIA_BUS_FMT_JPEG_1X8) {
+ ret = ov5640_set_jpeg_timings(sensor, mode);
+ if (ret < 0)
+ return ret;
+ }
ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPHO, mode->hact);
if (ret < 0)
@@ -945,6 +1121,12 @@
reg_addr = regs->reg_addr;
val = regs->val;
mask = regs->mask;
+
+ /* remain in power down mode for DVP */
+ if (regs->reg_addr == OV5640_REG_SYS_CTRL0 &&
+ val == OV5640_REG_SYS_CTRL0_SW_PWUP &&
+ sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY)
+ continue;
if (mask)
ret = ov5640_mod_reg(sensor, reg_addr, mask, val);
@@ -1036,106 +1218,9 @@
static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on)
{
- int ret;
- unsigned int flags = sensor->ep.bus.parallel.flags;
- u8 pclk_pol = 0;
- u8 hsync_pol = 0;
- u8 vsync_pol = 0;
-
- /*
- * Note about parallel port configuration.
- *
- * When configured in parallel mode, the OV5640 will
- * output 10 bits data on DVP data lines [9:0].
- * If only 8 bits data are wanted, the 8 bits data lines
- * of the camera interface must be physically connected
- * on the DVP data lines [9:2].
- *
- * Control lines polarity can be configured through
- * devicetree endpoint control lines properties.
- * If no endpoint control lines properties are set,
- * polarity will be as below:
- * - VSYNC: active high
- * - HREF: active low
- * - PCLK: active low
- */
-
- if (on) {
- /*
- * reset MIPI PCLK/SERCLK divider
- *
- * SC PLL CONTRL1 0
- * - [3..0]: MIPI PCLK/SERCLK divider
- */
- ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1, 0x0f, 0);
- if (ret)
- return ret;
-
- /*
- * configure parallel port control lines polarity
- *
- * POLARITY CTRL0
- * - [5]: PCLK polarity (0: active low, 1: active high)
- * - [1]: HREF polarity (0: active low, 1: active high)
- * - [0]: VSYNC polarity (mismatch here between
- * datasheet and hardware, 0 is active high
- * and 1 is active low...)
- */
- if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
- pclk_pol = 1;
- if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
- hsync_pol = 1;
- if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
- vsync_pol = 1;
-
- ret = ov5640_write_reg(sensor,
- OV5640_REG_POLARITY_CTRL00,
- (pclk_pol << 5) |
- (hsync_pol << 1) |
- vsync_pol);
-
- if (ret)
- return ret;
- }
-
- /*
- * powerdown MIPI TX/RX PHY & disable MIPI
- *
- * MIPI CONTROL 00
- * 4: PWDN PHY TX
- * 3: PWDN PHY RX
- * 2: MIPI enable
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_IO_MIPI_CTRL00, on ? 0x18 : 0);
- if (ret)
- return ret;
-
- /*
- * enable VSYNC/HREF/PCLK DVP control lines
- * & D[9:6] DVP data lines
- *
- * PAD OUTPUT ENABLE 01
- * - 6: VSYNC output enable
- * - 5: HREF output enable
- * - 4: PCLK output enable
- * - [3:0]: D[9:6] output enable
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_PAD_OUTPUT_ENABLE01,
- on ? 0x7f : 0);
- if (ret)
- return ret;
-
- /*
- * enable D[5:0] DVP data lines
- *
- * PAD OUTPUT ENABLE 02
- * - [7:2]: D[5:0] output enable
- */
- return ov5640_write_reg(sensor,
- OV5640_REG_PAD_OUTPUT_ENABLE02,
- on ? 0xfc : 0);
+ return ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, on ?
+ OV5640_REG_SYS_CTRL0_SW_PWUP :
+ OV5640_REG_SYS_CTRL0_SW_PWDN);
}
static int ov5640_set_stream_mipi(struct ov5640_dev *sensor, bool on)
@@ -1444,8 +1529,8 @@
{
const struct ov5640_mode_info *mode;
- mode = v4l2_find_nearest_size(ov5640_mode_data[fr],
- ARRAY_SIZE(ov5640_mode_data[fr]),
+ mode = v4l2_find_nearest_size(ov5640_mode_data,
+ ARRAY_SIZE(ov5640_mode_data),
hact, vact,
width, height);
@@ -1453,7 +1538,21 @@
(!nearest && (mode->hact != width || mode->vact != height)))
return NULL;
+ /* Check to see if the current mode exceeds the max frame rate */
+ if (ov5640_framerates[fr] > ov5640_framerates[mode->max_fps])
+ return NULL;
+
return mode;
+}
+
+static u64 ov5640_calc_pixel_rate(struct ov5640_dev *sensor)
+{
+ u64 rate;
+
+ rate = sensor->current_mode->vtot * sensor->current_mode->htot;
+ rate *= ov5640_framerates[sensor->current_fr];
+
+ return rate;
}
/*
@@ -1637,6 +1736,7 @@
enum ov5640_downsize_mode dn_mode, orig_dn_mode;
bool auto_gain = sensor->ctrls.auto_gain->val == 1;
bool auto_exp = sensor->ctrls.auto_exp->val == V4L2_EXPOSURE_AUTO;
+ unsigned long rate;
int ret;
dn_mode = mode->dn_mode;
@@ -1654,6 +1754,22 @@
if (ret)
goto restore_auto_gain;
}
+
+ /*
+ * All the formats we support have 16 bits per pixel, seems to require
+ * the same rate than YUV, so we can just use 16 bpp all the time.
+ */
+ rate = ov5640_calc_pixel_rate(sensor) * 16;
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
+ rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes;
+ ret = ov5640_set_mipi_pclk(sensor, rate);
+ } else {
+ rate = rate / sensor->ep.bus.parallel.bus_width;
+ ret = ov5640_set_dvp_pclk(sensor, rate);
+ }
+
+ if (ret < 0)
+ return 0;
if ((dn_mode == SUBSAMPLING && orig_dn_mode == SCALING) ||
(dn_mode == SCALING && orig_dn_mode == SUBSAMPLING)) {
@@ -1724,8 +1840,8 @@
sensor->last_mode = &ov5640_mode_init_data;
ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
- (ilog2(OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT) << 2) |
- ilog2(OV5640_SCLK_ROOT_DIVIDER_DEFAULT));
+ (ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) |
+ ilog2(OV5640_SCLK_ROOT_DIV));
if (ret)
return ret;
@@ -1806,6 +1922,182 @@
clk_disable_unprepare(sensor->xclk);
}
+static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on)
+{
+ int ret;
+
+ if (!on) {
+ /* Reset MIPI bus settings to their default values. */
+ ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58);
+ ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04);
+ ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00);
+ return 0;
+ }
+
+ /*
+ * Power up MIPI HS Tx and LS Rx; 2 data lanes mode
+ *
+ * 0x300e = 0x40
+ * [7:5] = 010 : 2 data lanes mode (see FIXME note in
+ * "ov5640_set_stream_mipi()")
+ * [4] = 0 : Power up MIPI HS Tx
+ * [3] = 0 : Power up MIPI LS Rx
+ * [2] = 1 : MIPI interface enabled
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x44);
+ if (ret)
+ return ret;
+
+ /*
+ * Gate clock and set LP11 in 'no packets mode' (idle)
+ *
+ * 0x4800 = 0x24
+ * [5] = 1 : Gate clock when 'no packets'
+ * [2] = 1 : MIPI bus in LP11 when 'no packets'
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24);
+ if (ret)
+ return ret;
+
+ /*
+ * Set data lanes and clock in LP11 when 'sleeping'
+ *
+ * 0x3019 = 0x70
+ * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping'
+ * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping'
+ * [4] = 1 : MIPI clock lane in LP11 when 'sleeping'
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70);
+ if (ret)
+ return ret;
+
+ /* Give lanes some time to coax into LP11 state. */
+ usleep_range(500, 1000);
+
+ return 0;
+}
+
+static int ov5640_set_power_dvp(struct ov5640_dev *sensor, bool on)
+{
+ unsigned int flags = sensor->ep.bus.parallel.flags;
+ bool bt656 = sensor->ep.bus_type == V4L2_MBUS_BT656;
+ u8 polarities = 0;
+ int ret;
+
+ if (!on) {
+ /* Reset settings to their default values. */
+ ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00, 0x00);
+ ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58);
+ ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, 0x20);
+ ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01, 0x00);
+ ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02, 0x00);
+ return 0;
+ }
+
+ /*
+ * Note about parallel port configuration.
+ *
+ * When configured in parallel mode, the OV5640 will
+ * output 10 bits data on DVP data lines [9:0].
+ * If only 8 bits data are wanted, the 8 bits data lines
+ * of the camera interface must be physically connected
+ * on the DVP data lines [9:2].
+ *
+ * Control lines polarity can be configured through
+ * devicetree endpoint control lines properties.
+ * If no endpoint control lines properties are set,
+ * polarity will be as below:
+ * - VSYNC: active high
+ * - HREF: active low
+ * - PCLK: active low
+ *
+ * VSYNC & HREF are not configured if BT656 bus mode is selected
+ */
+
+ /*
+ * BT656 embedded synchronization configuration
+ *
+ * CCIR656 CTRL00
+ * - [7]: SYNC code selection (0: auto generate sync code,
+ * 1: sync code from regs 0x4732-0x4735)
+ * - [6]: f value in CCIR656 SYNC code when fixed f value
+ * - [5]: Fixed f value
+ * - [4:3]: Blank toggle data options (00: data=1'h040/1'h200,
+ * 01: data from regs 0x4736-0x4738, 10: always keep 0)
+ * - [1]: Clip data disable
+ * - [0]: CCIR656 mode enable
+ *
+ * Default CCIR656 SAV/EAV mode with default codes
+ * SAV=0xff000080 & EAV=0xff00009d is enabled here with settings:
+ * - CCIR656 mode enable
+ * - auto generation of sync codes
+ * - blank toggle data 1'h040/1'h200
+ * - clip reserved data (0x00 & 0xff changed to 0x01 & 0xfe)
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00,
+ bt656 ? 0x01 : 0x00);
+ if (ret)
+ return ret;
+
+ /*
+ * configure parallel port control lines polarity
+ *
+ * POLARITY CTRL0
+ * - [5]: PCLK polarity (0: active low, 1: active high)
+ * - [1]: HREF polarity (0: active low, 1: active high)
+ * - [0]: VSYNC polarity (mismatch here between
+ * datasheet and hardware, 0 is active high
+ * and 1 is active low...)
+ */
+ if (!bt656) {
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ polarities |= BIT(1);
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+ polarities |= BIT(0);
+ }
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+ polarities |= BIT(5);
+
+ ret = ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, polarities);
+ if (ret)
+ return ret;
+
+ /*
+ * powerdown MIPI TX/RX PHY & enable DVP
+ *
+ * MIPI CONTROL 00
+ * [4] = 1 : Power down MIPI HS Tx
+ * [3] = 1 : Power down MIPI LS Rx
+ * [2] = 0 : DVP enable (MIPI disable)
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x18);
+ if (ret)
+ return ret;
+
+ /*
+ * enable VSYNC/HREF/PCLK DVP control lines
+ * & D[9:6] DVP data lines
+ *
+ * PAD OUTPUT ENABLE 01
+ * - 6: VSYNC output enable
+ * - 5: HREF output enable
+ * - 4: PCLK output enable
+ * - [3:0]: D[9:6] output enable
+ */
+ ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01,
+ bt656 ? 0x1f : 0x7f);
+ if (ret)
+ return ret;
+
+ /*
+ * enable D[5:0] DVP data lines
+ *
+ * PAD OUTPUT ENABLE 02
+ * - [7:2]: D[5:0] output enable
+ */
+ return ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02, 0xfc);
+}
+
static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
{
int ret = 0;
@@ -1818,67 +2110,17 @@
ret = ov5640_restore_mode(sensor);
if (ret)
goto power_off;
-
- /* We're done here for DVP bus, while CSI-2 needs setup. */
- if (sensor->ep.bus_type != V4L2_MBUS_CSI2)
- return 0;
-
- /*
- * Power up MIPI HS Tx and LS Rx; 2 data lanes mode
- *
- * 0x300e = 0x40
- * [7:5] = 010 : 2 data lanes mode (see FIXME note in
- * "ov5640_set_stream_mipi()")
- * [4] = 0 : Power up MIPI HS Tx
- * [3] = 0 : Power up MIPI LS Rx
- * [2] = 0 : MIPI interface disabled
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_IO_MIPI_CTRL00, 0x40);
- if (ret)
- goto power_off;
-
- /*
- * Gate clock and set LP11 in 'no packets mode' (idle)
- *
- * 0x4800 = 0x24
- * [5] = 1 : Gate clock when 'no packets'
- * [2] = 1 : MIPI bus in LP11 when 'no packets'
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_MIPI_CTRL00, 0x24);
- if (ret)
- goto power_off;
-
- /*
- * Set data lanes and clock in LP11 when 'sleeping'
- *
- * 0x3019 = 0x70
- * [6] = 1 : MIPI data lane 2 in LP11 when 'sleeping'
- * [5] = 1 : MIPI data lane 1 in LP11 when 'sleeping'
- * [4] = 1 : MIPI clock lane in LP11 when 'sleeping'
- */
- ret = ov5640_write_reg(sensor,
- OV5640_REG_PAD_OUTPUT00, 0x70);
- if (ret)
- goto power_off;
-
- /* Give lanes some time to coax into LP11 state. */
- usleep_range(500, 1000);
-
- } else {
- if (sensor->ep.bus_type == V4L2_MBUS_CSI2) {
- /* Reset MIPI bus settings to their default values. */
- ov5640_write_reg(sensor,
- OV5640_REG_IO_MIPI_CTRL00, 0x58);
- ov5640_write_reg(sensor,
- OV5640_REG_MIPI_CTRL00, 0x04);
- ov5640_write_reg(sensor,
- OV5640_REG_PAD_OUTPUT00, 0x00);
- }
-
- ov5640_set_power_off(sensor);
}
+
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY)
+ ret = ov5640_set_power_mipi(sensor, on);
+ else
+ ret = ov5640_set_power_dvp(sensor, on);
+ if (ret)
+ goto power_off;
+
+ if (!on)
+ ov5640_set_power_off(sensor);
return 0;
@@ -1925,34 +2167,39 @@
u32 width, u32 height)
{
const struct ov5640_mode_info *mode;
- u32 minfps, maxfps, fps;
- int ret;
+ enum ov5640_frame_rate rate = OV5640_15_FPS;
+ int minfps, maxfps, best_fps, fps;
+ int i;
minfps = ov5640_framerates[OV5640_15_FPS];
- maxfps = ov5640_framerates[OV5640_30_FPS];
+ maxfps = ov5640_framerates[OV5640_60_FPS];
if (fi->numerator == 0) {
fi->denominator = maxfps;
fi->numerator = 1;
- return OV5640_30_FPS;
+ rate = OV5640_60_FPS;
+ goto find_mode;
}
- fps = DIV_ROUND_CLOSEST(fi->denominator, fi->numerator);
+ fps = clamp_val(DIV_ROUND_CLOSEST(fi->denominator, fi->numerator),
+ minfps, maxfps);
+
+ best_fps = minfps;
+ for (i = 0; i < ARRAY_SIZE(ov5640_framerates); i++) {
+ int curr_fps = ov5640_framerates[i];
+
+ if (abs(curr_fps - fps) < abs(best_fps - fps)) {
+ best_fps = curr_fps;
+ rate = i;
+ }
+ }
fi->numerator = 1;
- if (fps > maxfps)
- fi->denominator = maxfps;
- else if (fps < minfps)
- fi->denominator = minfps;
- else if (2 * fps >= 2 * minfps + (maxfps - minfps))
- fi->denominator = maxfps;
- else
- fi->denominator = minfps;
+ fi->denominator = best_fps;
- ret = (fi->denominator == minfps) ? OV5640_15_FPS : OV5640_30_FPS;
-
- mode = ov5640_find_mode(sensor, ret, width, height, false);
- return mode ? ret : -EINVAL;
+find_mode:
+ mode = ov5640_find_mode(sensor, rate, width, height, false);
+ return mode ? rate : -EINVAL;
}
static int ov5640_get_fmt(struct v4l2_subdev *sd,
@@ -2052,6 +2299,8 @@
if (mbus_fmt->code != sensor->fmt.code)
sensor->pending_fmt_change = true;
+ __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
+ ov5640_calc_pixel_rate(sensor));
out:
mutex_unlock(&sensor->lock);
return ret;
@@ -2061,46 +2310,67 @@
struct v4l2_mbus_framefmt *format)
{
int ret = 0;
- bool is_rgb = false;
bool is_jpeg = false;
- u8 val;
+ u8 fmt, mux;
switch (format->code) {
case MEDIA_BUS_FMT_UYVY8_2X8:
/* YUV422, UYVY */
- val = 0x3f;
+ fmt = 0x3f;
+ mux = OV5640_FMT_MUX_YUV422;
break;
case MEDIA_BUS_FMT_YUYV8_2X8:
/* YUV422, YUYV */
- val = 0x30;
+ fmt = 0x30;
+ mux = OV5640_FMT_MUX_YUV422;
break;
case MEDIA_BUS_FMT_RGB565_2X8_LE:
/* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */
- val = 0x6F;
- is_rgb = true;
+ fmt = 0x6F;
+ mux = OV5640_FMT_MUX_RGB;
break;
case MEDIA_BUS_FMT_RGB565_2X8_BE:
/* RGB565 {r[4:0],g[5:3]},{g[2:0],b[4:0]} */
- val = 0x61;
- is_rgb = true;
+ fmt = 0x61;
+ mux = OV5640_FMT_MUX_RGB;
break;
case MEDIA_BUS_FMT_JPEG_1X8:
/* YUV422, YUYV */
- val = 0x30;
+ fmt = 0x30;
+ mux = OV5640_FMT_MUX_YUV422;
is_jpeg = true;
+ break;
+ case MEDIA_BUS_FMT_SBGGR8_1X8:
+ /* Raw, BGBG... / GRGR... */
+ fmt = 0x00;
+ mux = OV5640_FMT_MUX_RAW_DPC;
+ break;
+ case MEDIA_BUS_FMT_SGBRG8_1X8:
+ /* Raw bayer, GBGB... / RGRG... */
+ fmt = 0x01;
+ mux = OV5640_FMT_MUX_RAW_DPC;
+ break;
+ case MEDIA_BUS_FMT_SGRBG8_1X8:
+ /* Raw bayer, GRGR... / BGBG... */
+ fmt = 0x02;
+ mux = OV5640_FMT_MUX_RAW_DPC;
+ break;
+ case MEDIA_BUS_FMT_SRGGB8_1X8:
+ /* Raw bayer, RGRG... / GBGB... */
+ fmt = 0x03;
+ mux = OV5640_FMT_MUX_RAW_DPC;
break;
default:
return -EINVAL;
}
/* FORMAT CONTROL00: YUV and RGB formatting */
- ret = ov5640_write_reg(sensor, OV5640_REG_FORMAT_CONTROL00, val);
+ ret = ov5640_write_reg(sensor, OV5640_REG_FORMAT_CONTROL00, fmt);
if (ret)
return ret;
/* FORMAT MUX CONTROL: ISP YUV or RGB */
- ret = ov5640_write_reg(sensor, OV5640_REG_ISP_FORMAT_MUX_CTRL,
- is_rgb ? 0x01 : 0x00);
+ ret = ov5640_write_reg(sensor, OV5640_REG_ISP_FORMAT_MUX_CTRL, mux);
if (ret)
return ret;
@@ -2268,10 +2538,41 @@
return ret;
}
+static const char * const test_pattern_menu[] = {
+ "Disabled",
+ "Color bars",
+ "Color bars w/ rolling bar",
+ "Color squares",
+ "Color squares w/ rolling bar",
+};
+
+#define OV5640_TEST_ENABLE BIT(7)
+#define OV5640_TEST_ROLLING BIT(6) /* rolling horizontal bar */
+#define OV5640_TEST_TRANSPARENT BIT(5)
+#define OV5640_TEST_SQUARE_BW BIT(4) /* black & white squares */
+#define OV5640_TEST_BAR_STANDARD (0 << 2)
+#define OV5640_TEST_BAR_VERT_CHANGE_1 (1 << 2)
+#define OV5640_TEST_BAR_HOR_CHANGE (2 << 2)
+#define OV5640_TEST_BAR_VERT_CHANGE_2 (3 << 2)
+#define OV5640_TEST_BAR (0 << 0)
+#define OV5640_TEST_RANDOM (1 << 0)
+#define OV5640_TEST_SQUARE (2 << 0)
+#define OV5640_TEST_BLACK (3 << 0)
+
+static const u8 test_pattern_val[] = {
+ 0,
+ OV5640_TEST_ENABLE | OV5640_TEST_BAR_VERT_CHANGE_1 |
+ OV5640_TEST_BAR,
+ OV5640_TEST_ENABLE | OV5640_TEST_ROLLING |
+ OV5640_TEST_BAR_VERT_CHANGE_1 | OV5640_TEST_BAR,
+ OV5640_TEST_ENABLE | OV5640_TEST_SQUARE,
+ OV5640_TEST_ENABLE | OV5640_TEST_ROLLING | OV5640_TEST_SQUARE,
+};
+
static int ov5640_set_ctrl_test_pattern(struct ov5640_dev *sensor, int value)
{
- return ov5640_mod_reg(sensor, OV5640_REG_PRE_ISP_TEST_SET1,
- 0xa4, value ? 0xa4 : 0);
+ return ov5640_write_reg(sensor, OV5640_REG_PRE_ISP_TEST_SET1,
+ test_pattern_val[value]);
}
static int ov5640_set_ctrl_light_freq(struct ov5640_dev *sensor, int value)
@@ -2412,11 +2713,6 @@
.s_ctrl = ov5640_s_ctrl,
};
-static const char * const test_pattern_menu[] = {
- "Disabled",
- "Color bars",
-};
-
static int ov5640_init_controls(struct ov5640_dev *sensor)
{
const struct v4l2_ctrl_ops *ops = &ov5640_ctrl_ops;
@@ -2428,6 +2724,11 @@
/* we can use our own mutex for the ctrl lock */
hdl->lock = &sensor->lock;
+
+ /* Clock related controls */
+ ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE,
+ 0, INT_MAX, 1,
+ ov5640_calc_pixel_rate(sensor));
/* Auto/manual white balance */
ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
@@ -2447,7 +2748,7 @@
/* Auto/manual gain */
ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
0, 1, 1, 1);
- ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
+ ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN,
0, 1023, 1, 0);
ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
@@ -2476,6 +2777,7 @@
goto free_ctrls;
}
+ ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
@@ -2501,10 +2803,10 @@
return -EINVAL;
fse->min_width =
- ov5640_mode_data[0][fse->index].hact;
+ ov5640_mode_data[fse->index].hact;
fse->max_width = fse->min_width;
fse->min_height =
- ov5640_mode_data[0][fse->index].vact;
+ ov5640_mode_data[fse->index].vact;
fse->max_height = fse->min_height;
return 0;
@@ -2569,8 +2871,11 @@
frame_rate = ov5640_try_frame_interval(sensor, &fi->interval,
mode->hact, mode->vact);
- if (frame_rate < 0)
- frame_rate = OV5640_15_FPS;
+ if (frame_rate < 0) {
+ /* Always return a valid frame interval value */
+ fi->interval = sensor->frame_interval;
+ goto out;
+ }
mode = ov5640_find_mode(sensor, frame_rate, mode->hact,
mode->vact, true);
@@ -2585,6 +2890,9 @@
sensor->frame_interval = fi->interval;
sensor->current_mode = mode;
sensor->pending_mode_change = true;
+
+ __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
+ ov5640_calc_pixel_rate(sensor));
}
out:
mutex_unlock(&sensor->lock);
@@ -2625,7 +2933,7 @@
sensor->pending_fmt_change = false;
}
- if (sensor->ep.bus_type == V4L2_MBUS_CSI2)
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY)
ret = ov5640_set_stream_mipi(sensor, enable);
else
ret = ov5640_set_stream_dvp(sensor, enable);
@@ -2640,6 +2948,9 @@
static const struct v4l2_subdev_core_ops ov5640_core_ops = {
.s_power = ov5640_s_power,
+ .log_status = v4l2_ctrl_subdev_log_status,
+ .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+ .unsubscribe_event = v4l2_event_subdev_unsubscribe,
};
static const struct v4l2_subdev_video_ops ov5640_video_ops = {
@@ -2702,8 +3013,7 @@
return ret;
}
-static int ov5640_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ov5640_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct fwnode_handle *endpoint;
@@ -2735,7 +3045,7 @@
sensor->frame_interval.denominator = ov5640_framerates[OV5640_30_FPS];
sensor->current_fr = OV5640_30_FPS;
sensor->current_mode =
- &ov5640_mode_data[OV5640_30_FPS][OV5640_MODE_VGA_640_480];
+ &ov5640_mode_data[OV5640_MODE_VGA_640_480];
sensor->last_mode = sensor->current_mode;
sensor->ae_target = 52;
@@ -2747,7 +3057,7 @@
switch (rotation) {
case 180:
sensor->upside_down = true;
- /* fall through */
+ fallthrough;
case 0:
break;
default:
@@ -2768,6 +3078,13 @@
if (ret) {
dev_err(dev, "Could not parse endpoint\n");
return ret;
+ }
+
+ if (sensor->ep.bus_type != V4L2_MBUS_PARALLEL &&
+ sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY &&
+ sensor->ep.bus_type != V4L2_MBUS_BT656) {
+ dev_err(dev, "Unsupported bus type %d\n", sensor->ep.bus_type);
+ return -EINVAL;
}
/* get system clock (xclk) */
@@ -2799,7 +3116,8 @@
v4l2_i2c_subdev_init(&sensor->sd, client, &ov5640_subdev_ops);
- sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+ V4L2_SUBDEV_FL_HAS_EVENTS;
sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
@@ -2820,7 +3138,7 @@
if (ret)
goto entity_cleanup;
- ret = v4l2_async_register_subdev(&sensor->sd);
+ ret = v4l2_async_register_subdev_sensor_common(&sensor->sd);
if (ret)
goto free_ctrls;
@@ -2865,7 +3183,7 @@
.of_match_table = ov5640_dt_ids,
},
.id_table = ov5640_id,
- .probe = ov5640_probe,
+ .probe_new = ov5640_probe,
.remove = ov5640_remove,
};
--
Gitblit v1.6.2