From 1543e317f1da31b75942316931e8f491a8920811 Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Thu, 04 Jan 2024 10:08:02 +0000 Subject: [PATCH] disable FB --- kernel/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 70659c9..7734ab6 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -65,7 +65,7 @@ - Pin mux/config groups as child nodes: The pin mux (selecting pin function mode) and pin config (pull up/down, driver strength) settings are represented - as child nodes of the pin-controller node. There should be atleast one + as child nodes of the pin-controller node. There should be at least one child node and there is no limit on the count of these child nodes. It is also possible for a child node to consist of several further child nodes to allow grouping multiple pinctrl groups into one. The format of second @@ -75,7 +75,7 @@ The child node should contain a list of pin(s) on which a particular pin function selection or pin configuration (or both) have to applied. This list of pins is specified using the property name "samsung,pins". There - should be atleast one pin specfied for this property and there is no upper + should be at least one pin specified for this property and there is no upper limit on the count of pins that can be specified. The pins are specified using pin names which are derived from the hardware manual of the SoC. As an example, the pins in GPA0 bank of the pin controller can be represented @@ -107,7 +107,7 @@ hardware manual and these values are programmed as-is into the pin pull up/down and driver strength register of the pin-controller. - Note: A child should include atleast a pin function selection property or + Note: A child should include at least a pin function selection property or pin configuration property (one or more) or both. The client nodes that require a particular pin function selection and/or -- Gitblit v1.6.2