From 10ebd8556b7990499c896a550e3d416b444211e6 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 02:23:07 +0000
Subject: [PATCH] add led
---
kernel/arch/arm/boot/dts/pxa168.dtsi | 32 +++++++++++++++++++-------------
1 files changed, 19 insertions(+), 13 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/pxa168.dtsi b/kernel/arch/arm/boot/dts/pxa168.dtsi
index b899e25..4fe7735 100644
--- a/kernel/arch/arm/boot/dts/pxa168.dtsi
+++ b/kernel/arch/arm/boot/dts/pxa168.dtsi
@@ -1,16 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Marvell Technology Group Ltd.
* Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/clock/marvell,pxa168.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
aliases {
serial0 = &uart1;
serial1 = &uart2;
@@ -56,27 +55,30 @@
interrupts = <13>;
};
- uart1: uart@d4017000 {
- compatible = "mrvl,mmp-uart";
+ uart1: serial@d4017000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
reg = <0xd4017000 0x1000>;
+ reg-shift = <2>;
interrupts = <27>;
clocks = <&soc_clocks PXA168_CLK_UART0>;
resets = <&soc_clocks PXA168_CLK_UART0>;
status = "disabled";
};
- uart2: uart@d4018000 {
- compatible = "mrvl,mmp-uart";
+ uart2: serial@d4018000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
reg = <0xd4018000 0x1000>;
+ reg-shift = <2>;
interrupts = <28>;
clocks = <&soc_clocks PXA168_CLK_UART1>;
resets = <&soc_clocks PXA168_CLK_UART1>;
status = "disabled";
};
- uart3: uart@d4026000 {
- compatible = "mrvl,mmp-uart";
+ uart3: serial@d4026000 {
+ compatible = "mrvl,mmp-uart", "intel,xscale-uart";
reg = <0xd4026000 0x1000>;
+ reg-shift = <2>;
interrupts = <29>;
clocks = <&soc_clocks PXA168_CLK_UART2>;
resets = <&soc_clocks PXA168_CLK_UART2>;
@@ -95,7 +97,7 @@
resets = <&soc_clocks PXA168_CLK_GPIO>;
interrupt-names = "gpio_mux";
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
ranges;
gcb0: gpio@d4019000 {
@@ -117,6 +119,8 @@
twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0xd4011000 0x1000>;
interrupts = <7>;
clocks = <&soc_clocks PXA168_CLK_TWSI0>;
@@ -127,6 +131,8 @@
twsi2: i2c@d4025000 {
compatible = "mrvl,mmp-twsi";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0xd4025000 0x1000>;
interrupts = <58>;
clocks = <&soc_clocks PXA168_CLK_TWSI1>;
@@ -137,7 +143,7 @@
rtc: rtc@d4010000 {
compatible = "mrvl,mmp-rtc";
reg = <0xd4010000 0x1000>;
- interrupts = <5 6>;
+ interrupts = <5>, <6>;
interrupt-names = "rtc 1Hz", "rtc alarm";
clocks = <&soc_clocks PXA168_CLK_RTC>;
resets = <&soc_clocks PXA168_CLK_RTC>;
--
Gitblit v1.6.2