From 10ebd8556b7990499c896a550e3d416b444211e6 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 02:23:07 +0000
Subject: [PATCH] add led
---
kernel/arch/arm/boot/dts/ls1021a.dtsi | 282 ++++++++++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 242 insertions(+), 40 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/ls1021a.dtsi b/kernel/arch/arm/boot/dts/ls1021a.dtsi
index b66b2bd..37026b2 100644
--- a/kernel/arch/arm/boot/dts/ls1021a.dtsi
+++ b/kernel/arch/arm/boot/dts/ls1021a.dtsi
@@ -45,11 +45,12 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include "skeleton64.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
compatible = "fsl,ls1021a";
interrupt-parent = <&gic>;
@@ -58,6 +59,7 @@
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
+ rtc1 = &ftm_alarm0;
serial0 = &lpuart0;
serial1 = &lpuart1;
serial2 = &lpuart2;
@@ -86,6 +88,11 @@
clocks = <&clockgen 1 0>;
#cooling-cells = <2>;
};
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>;
};
sysclk: sysclk {
@@ -125,6 +132,13 @@
interrupt-parent = <&gic>;
ranges;
+ ddr: memory-controller@1080000 {
+ compatible = "fsl,qoriq-memory-controller";
+ reg = <0x0 0x1080000 0x0 0x1000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ };
+
gic: interrupt-controller@1400000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
@@ -163,7 +177,7 @@
big-endian;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -173,7 +187,6 @@
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
- big-endian;
status = "disabled";
};
@@ -204,6 +217,25 @@
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1570000 0x10000>;
+
+ extirq: interrupt-controller@1ac {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1ac 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xffffffff 0x0>;
+ };
};
crypto: crypto@1700000 {
@@ -299,38 +331,7 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&tmu 0>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -343,7 +344,7 @@
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
@@ -364,6 +365,8 @@
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 39>, <&edma0 1 38>;
status = "disabled";
};
@@ -375,6 +378,8 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 37>, <&edma0 1 36>;
status = "disabled";
};
@@ -386,6 +391,8 @@
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 35>, <&edma0 1 34>;
status = "disabled";
};
@@ -422,6 +429,34 @@
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
+ status = "disabled";
+ };
+
+ counter0: counter@29d0000 {
+ compatible = "fsl,ftm-quaddec";
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ big-endian;
+ status = "disabled";
+ };
+
+ counter1: counter@29e0000 {
+ compatible = "fsl,ftm-quaddec";
+ reg = <0x0 0x29e0000 0x0 0x10000>;
+ big-endian;
+ status = "disabled";
+ };
+
+ counter2: counter@29f0000 {
+ compatible = "fsl,ftm-quaddec";
+ reg = <0x0 0x29f0000 0x0 0x10000>;
+ big-endian;
+ status = "disabled";
+ };
+
+ counter3: counter@2a00000 {
+ compatible = "fsl,ftm-quaddec";
+ reg = <0x0 0x2a00000 0x0 0x10000>;
+ big-endian;
status = "disabled";
};
@@ -519,6 +554,102 @@
status = "disabled";
};
+ pwm0: pwm@29d0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm1: pwm@29e0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29e0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm2: pwm@29f0000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x29f0000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm3: pwm@2a00000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a00000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm4: pwm@2a10000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a10000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm5: pwm@2a20000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a20000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm6: pwm@2a30000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a30000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
+ pwm7: pwm@2a40000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2a40000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&clockgen 4 1>, <&clockgen 4 1>;
+ big-endian;
+ status = "disabled";
+ };
+
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -611,6 +742,7 @@
fsl,tmr-fiper1 = <999999995>;
fsl,tmr-fiper2 = <999999995>;
fsl,max-adj = <499999999>;
+ fsl,extts-fifo;
};
enet0: ethernet@2d10000 {
@@ -716,10 +848,11 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
pcie@3400000 {
- compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls1021a-pcie";
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
@@ -728,7 +861,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- num-lanes = <4>;
+ num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@@ -739,10 +872,11 @@
<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
pcie@3500000 {
- compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls1021a-pcie";
reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
@@ -751,7 +885,7 @@
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
- num-lanes = <4>;
+ num-viewport = <6>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
@@ -762,6 +896,7 @@
<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
can0: can@2a70000 {
@@ -815,5 +950,72 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x10010000 0x10000>;
};
+
+ qdma: dma-controller@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+ <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error",
+ "qdma-queue0", "qdma-queue1";
+ dma-channels = <8>;
+ block-number = <1>;
+ block-offset = <0x1000>;
+ fsl,dma-queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
+ rcpm: power-controller@1ee2140 {
+ compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1ee2140 0x0 0x8>;
+ #fsl,rcpm-wakeup-cells = <2>;
+ };
+
+ ftm_alarm0: timer0@29d0000 {
+ compatible = "fsl,ls1021a-ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ reg-names = "ftm";
+ fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
};
};
--
Gitblit v1.6.2