From 10ebd8556b7990499c896a550e3d416b444211e6 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 02:23:07 +0000
Subject: [PATCH] add led
---
kernel/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 62 +++++++++++-------------------
1 files changed, 23 insertions(+), 39 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/kernel/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 032e8dd..1386a5e 100644
--- a/kernel/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/kernel/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -1,8 +1,4 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0-only
/ {
gpio_keys {
@@ -63,12 +59,13 @@
};
};
- pwm10: dmtimer-pwm {
+ pwm10: pwm-10 {
compatible = "ti,omap-dmtimer-pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins>;
ti,timers = <&timer10>;
#pwm-cells = <3>;
+ ti,clock-source = <0x01>;
};
};
@@ -107,14 +104,20 @@
};
};
+&hdqw1w {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdq_pins>;
+};
+
+
&vpll2 {
regulator-always-on;
};
&dss {
- status = "ok";
+ status = "okay";
vdds_dsi-supply = <&vpll2>;
- vdda_video-supply = <&video_reg>;
+ vdda_video-supply = <&vpll2>;
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins1>;
port {
@@ -130,43 +133,18 @@
display0 = &lcd0;
};
- video_reg: video_reg {
+ lcd0: display {
+ /* This isn't the exact LCD, but the timings meet spec */
+ compatible = "newhaven,nhd-4.3-480272ef-atxl";
+ label = "15";
pinctrl-names = "default";
pinctrl-0 = <&panel_pwr_pins>;
- compatible = "regulator-fixed";
- regulator-name = "fixed-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
- };
-
- lcd0: display {
- compatible = "panel-dpi";
- label = "15";
- status = "okay";
- /* default-on; */
- pinctrl-names = "default";
-
+ backlight = <&bl>;
+ enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
- };
-
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <3>;
- hback-porch = <2>;
- hsync-len = <42>;
- vback-porch = <3>;
- vfront-porch = <4>;
- vsync-len = <11>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
};
};
@@ -199,6 +177,12 @@
>;
};
+ hdq_pins: hdq_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* hdq_sio */
+ >;
+ };
+
pwm_pins: pinmux_pwm_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
--
Gitblit v1.6.2