From 10ebd8556b7990499c896a550e3d416b444211e6 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 02:23:07 +0000
Subject: [PATCH] add led
---
kernel/arch/arm/boot/dts/exynos5250-smdk5250.dts | 30 ++++++++++++++++++------------
1 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/exynos5250-smdk5250.dts b/kernel/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 594b246..06c4e09 100644
--- a/kernel/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/kernel/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -1,18 +1,19 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * SAMSUNG SMDK5250 board device tree source
+ * Samsung SMDK5250 board device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*/
/dts-v1/;
+#include <dt-bindings/clock/maxim,max77686.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
/ {
- model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+ model = "Samsung SMDK5250 board based on Exynos5250";
compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
aliases {
@@ -24,7 +25,8 @@
};
chosen {
- bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+ stdout-path = "serial2:115200n8";
};
vdd: fixed-regulator-vdd {
@@ -116,6 +118,9 @@
status = "okay";
ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
};
&i2c_0 {
@@ -124,17 +129,18 @@
samsung,i2c-max-bus-freq = <20000>;
eeprom@50 {
- compatible = "samsung,s524ad0xd1";
+ compatible = "samsung,s524ad0xd1", "atmel,24c128";
reg = <0x50>;
};
- max77686@9 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
+ #clock-cells = <1>;
wakeup-source;
voltage-regulators {
@@ -283,7 +289,7 @@
samsung,i2c-max-bus-freq = <20000>;
eeprom@51 {
- compatible = "samsung,s524ad0xd1";
+ compatible = "samsung,s524ad0xd1", "atmel,24c128";
reg = <0x51>;
};
@@ -323,12 +329,6 @@
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c: sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
};
&i2s0 {
@@ -367,6 +367,8 @@
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
};
&sata {
@@ -378,6 +380,10 @@
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
+&sata_phy_i2c {
+ status = "okay";
+};
+
&spi_1 {
status = "okay";
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
--
Gitblit v1.6.2