From 10ebd8556b7990499c896a550e3d416b444211e6 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 02:23:07 +0000
Subject: [PATCH] add led
---
kernel/arch/arm/boot/dts/at91sam9x5dm.dtsi | 91 +++++++++++++++++++++------------------------
1 files changed, 43 insertions(+), 48 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91sam9x5dm.dtsi b/kernel/arch/arm/boot/dts/at91sam9x5dm.dtsi
index 34c089f..a927803 100644
--- a/kernel/arch/arm/boot/dts/at91sam9x5dm.dtsi
+++ b/kernel/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
*
@@ -5,56 +6,9 @@
* 2014 Free Electrons
*
* Author: Boris Brezillon <boris.brezillon@free-electrons.com>
- *
- * Licensed under GPLv2 or later.
*/
/ {
- ahb {
- apb {
- i2c0: i2c@f8010000 {
- qt1070: keyboard@1b {
- compatible = "qt1070";
- reg = <0x1b>;
- interrupt-parent = <&pioA>;
- interrupts = <7 0x0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qt1070_irq>;
- wakeup-source;
- };
- };
-
- hlcdc: hlcdc@f8038000 {
- hlcdc-display-controller {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
- port@0 {
- hlcdc_panel_output: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
- };
- };
-
- adc0: adc@f804c000 {
- atmel,adc-ts-wires = <4>;
- atmel,adc-ts-pressure-threshold = <10000>;
- status = "okay";
- };
-
- pinctrl@fffff400 {
- board {
- pinctrl_qt1070_irq: qt1070_irq {
- atmel,pins =
- <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
- };
- };
- };
- };
- };
-
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&hlcdc_pwm 0 50000 0>;
@@ -73,7 +27,7 @@
};
panel: panel {
- compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+ compatible = "foxlink,fl500wvr00-a0t";
backlight = <&backlight>;
power-supply = <&panel_reg>;
#address-cells = <1>;
@@ -99,3 +53,44 @@
status = "disabled";
};
};
+
+&adc0 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+};
+
+&i2c0 {
+ keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioA>;
+ interrupts = <7 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ wakeup-source;
+ };
+};
+
+&hlcdc {
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+ port@0 {
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ board {
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+};
--
Gitblit v1.6.2