From 102a0743326a03cd1a1202ceda21e175b7d3575c Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:20:52 +0000
Subject: [PATCH] add new system file
---
kernel/include/linux/gpio/machine.h | 45 ++++++++++++++++++++++++++-------------------
1 files changed, 26 insertions(+), 19 deletions(-)
diff --git a/kernel/include/linux/gpio/machine.h b/kernel/include/linux/gpio/machine.h
index daa44ea..781a053 100644
--- a/kernel/include/linux/gpio/machine.h
+++ b/kernel/include/linux/gpio/machine.h
@@ -6,31 +6,38 @@
#include <linux/list.h>
enum gpio_lookup_flags {
- GPIO_ACTIVE_HIGH = (0 << 0),
- GPIO_ACTIVE_LOW = (1 << 0),
- GPIO_OPEN_DRAIN = (1 << 1),
- GPIO_OPEN_SOURCE = (1 << 2),
- GPIO_PERSISTENT = (0 << 3),
- GPIO_TRANSITORY = (1 << 3),
+ GPIO_ACTIVE_HIGH = (0 << 0),
+ GPIO_ACTIVE_LOW = (1 << 0),
+ GPIO_OPEN_DRAIN = (1 << 1),
+ GPIO_OPEN_SOURCE = (1 << 2),
+ GPIO_PERSISTENT = (0 << 3),
+ GPIO_TRANSITORY = (1 << 3),
+ GPIO_PULL_UP = (1 << 4),
+ GPIO_PULL_DOWN = (1 << 5),
+
+ GPIO_LOOKUP_FLAGS_DEFAULT = GPIO_ACTIVE_HIGH | GPIO_PERSISTENT,
};
/**
* struct gpiod_lookup - lookup table
- * @chip_label: name of the chip the GPIO belongs to
- * @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO
+ * @key: either the name of the chip the GPIO belongs to, or the GPIO line name
+ * Note that GPIO line names are not guaranteed to be globally unique,
+ * so this will use the first match found!
+ * @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO, or
+ * U16_MAX to indicate that @key is a GPIO line name
* @con_id: name of the GPIO from the device's point of view
* @idx: index of the GPIO in case several GPIOs share the same name
- * @flags: mask of GPIO_* values
+ * @flags: bitmask of gpio_lookup_flags GPIO_* values
*
* gpiod_lookup is a lookup table for associating GPIOs to specific devices and
* functions using platform data.
*/
struct gpiod_lookup {
- const char *chip_label;
+ const char *key;
u16 chip_hwnum;
const char *con_id;
unsigned int idx;
- enum gpio_lookup_flags flags;
+ unsigned long flags;
};
struct gpiod_lookup_table {
@@ -44,7 +51,7 @@
* @chip_label: name of the chip the GPIO belongs to
* @chip_hwnum: hardware number (i.e. relative to the chip) of the GPIO
* @line_name: consumer name for the hogged line
- * @lflags: mask of GPIO lookup flags
+ * @lflags: bitmask of gpio_lookup_flags GPIO_* values
* @dflags: GPIO flags used to specify the direction and value
*/
struct gpiod_hog {
@@ -52,24 +59,24 @@
const char *chip_label;
u16 chip_hwnum;
const char *line_name;
- enum gpio_lookup_flags lflags;
+ unsigned long lflags;
int dflags;
};
/*
* Simple definition of a single GPIO under a con_id
*/
-#define GPIO_LOOKUP(_chip_label, _chip_hwnum, _con_id, _flags) \
- GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, 0, _flags)
+#define GPIO_LOOKUP(_key, _chip_hwnum, _con_id, _flags) \
+ GPIO_LOOKUP_IDX(_key, _chip_hwnum, _con_id, 0, _flags)
/*
* Use this macro if you need to have several GPIOs under the same con_id.
* Each GPIO needs to use a different index and can be accessed using
* gpiod_get_index()
*/
-#define GPIO_LOOKUP_IDX(_chip_label, _chip_hwnum, _con_id, _idx, _flags) \
+#define GPIO_LOOKUP_IDX(_key, _chip_hwnum, _con_id, _idx, _flags) \
{ \
- .chip_label = _chip_label, \
+ .key = _key, \
.chip_hwnum = _chip_hwnum, \
.con_id = _con_id, \
.idx = _idx, \
@@ -93,7 +100,7 @@
void gpiod_add_lookup_tables(struct gpiod_lookup_table **tables, size_t n);
void gpiod_remove_lookup_table(struct gpiod_lookup_table *table);
void gpiod_add_hogs(struct gpiod_hog *hogs);
-#else
+#else /* ! CONFIG_GPIOLIB */
static inline
void gpiod_add_lookup_table(struct gpiod_lookup_table *table) {}
static inline
@@ -101,6 +108,6 @@
static inline
void gpiod_remove_lookup_table(struct gpiod_lookup_table *table) {}
static inline void gpiod_add_hogs(struct gpiod_hog *hogs) {}
-#endif
+#endif /* CONFIG_GPIOLIB */
#endif /* __LINUX_GPIO_MACHINE_H */
--
Gitblit v1.6.2