From 102a0743326a03cd1a1202ceda21e175b7d3575c Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:20:52 +0000
Subject: [PATCH] add new system file
---
kernel/drivers/pci/pci.c | 71 ++++++++++++++++-------------------
1 files changed, 32 insertions(+), 39 deletions(-)
diff --git a/kernel/drivers/pci/pci.c b/kernel/drivers/pci/pci.c
index c909cc7..e7b45d8 100644
--- a/kernel/drivers/pci/pci.c
+++ b/kernel/drivers/pci/pci.c
@@ -164,9 +164,6 @@
}
__setup("pcie_port_pm=", pcie_port_pm_setup);
-/* Time to wait after a reset for device to become responsive */
-#define PCIE_RESET_READY_POLL_MS 60000
-
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
@@ -1228,7 +1225,7 @@
return -ENOTTY;
}
- if (delay > 1000)
+ if (delay > PCI_RESET_WAIT)
pci_info(dev, "not ready %dms after %s; waiting\n",
delay - 1, reset_type);
@@ -1237,7 +1234,7 @@
pci_read_config_dword(dev, PCI_COMMAND, &id);
}
- if (delay > 1000)
+ if (delay > PCI_RESET_WAIT)
pci_info(dev, "ready %dms after %s\n", delay - 1,
reset_type);
@@ -2840,13 +2837,13 @@
{
/*
* Downstream device is not accessible after putting a root port
- * into D3cold and back into D0 on Elo i2.
+ * into D3cold and back into D0 on Elo Continental Z2 board
*/
- .ident = "Elo i2",
+ .ident = "Elo Continental Z2",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Elo Touch Solutions"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Elo i2"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "RevB"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "Elo Touch Solutions"),
+ DMI_MATCH(DMI_BOARD_NAME, "Geminilake"),
+ DMI_MATCH(DMI_BOARD_VERSION, "Continental Z2"),
},
},
#endif
@@ -4799,24 +4796,31 @@
/**
* pci_bridge_wait_for_secondary_bus - Wait for secondary bus to be accessible
* @dev: PCI bridge
+ * @reset_type: reset type in human-readable form
+ * @timeout: maximum time to wait for devices on secondary bus (milliseconds)
*
* Handle necessary delays before access to the devices on the secondary
- * side of the bridge are permitted after D3cold to D0 transition.
+ * side of the bridge are permitted after D3cold to D0 transition
+ * or Conventional Reset.
*
* For PCIe this means the delays in PCIe 5.0 section 6.6.1. For
* conventional PCI it means Tpvrh + Trhfa specified in PCI 3.0 section
* 4.3.2.
+ *
+ * Return 0 on success or -ENOTTY if the first device on the secondary bus
+ * failed to become accessible.
*/
-void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev)
+int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type,
+ int timeout)
{
struct pci_dev *child;
int delay;
if (pci_dev_is_disconnected(dev))
- return;
+ return 0;
- if (!pci_is_bridge(dev) || !dev->bridge_d3)
- return;
+ if (!pci_is_bridge(dev))
+ return 0;
down_read(&pci_bus_sem);
@@ -4828,14 +4832,14 @@
*/
if (!dev->subordinate || list_empty(&dev->subordinate->devices)) {
up_read(&pci_bus_sem);
- return;
+ return 0;
}
/* Take d3cold_delay requirements into account */
delay = pci_bus_max_d3cold_delay(dev->subordinate);
if (!delay) {
up_read(&pci_bus_sem);
- return;
+ return 0;
}
child = list_first_entry(&dev->subordinate->devices, struct pci_dev,
@@ -4844,14 +4848,12 @@
/*
* Conventional PCI and PCI-X we need to wait Tpvrh + Trhfa before
- * accessing the device after reset (that is 1000 ms + 100 ms). In
- * practice this should not be needed because we don't do power
- * management for them (see pci_bridge_d3_possible()).
+ * accessing the device after reset (that is 1000 ms + 100 ms).
*/
if (!pci_is_pcie(dev)) {
pci_dbg(dev, "waiting %d ms for secondary bus\n", 1000 + delay);
msleep(1000 + delay);
- return;
+ return 0;
}
/*
@@ -4868,11 +4870,11 @@
* configuration requests if we only wait for 100 ms (see
* https://bugzilla.kernel.org/show_bug.cgi?id=203885).
*
- * Therefore we wait for 100 ms and check for the device presence.
- * If it is still not present give it an additional 100 ms.
+ * Therefore we wait for 100 ms and check for the device presence
+ * until the timeout expires.
*/
if (!pcie_downstream_port(dev))
- return;
+ return 0;
if (pcie_get_speed_cap(dev) <= PCIE_SPEED_5_0GT) {
pci_dbg(dev, "waiting %d ms for downstream link\n", delay);
@@ -4883,14 +4885,11 @@
if (!pcie_wait_for_link_delay(dev, true, delay)) {
/* Did not train, no need to wait any further */
pci_info(dev, "Data Link Layer Link Active not set in 1000 msec\n");
- return;
+ return -ENOTTY;
}
}
- if (!pci_device_is_present(child)) {
- pci_dbg(child, "waiting additional %d ms to become accessible\n", delay);
- msleep(delay);
- }
+ return pci_dev_wait(child, reset_type, timeout - delay);
}
void pci_reset_secondary_bus(struct pci_dev *dev)
@@ -4909,15 +4908,6 @@
ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
-
- /*
- * Trhfa for conventional PCI is 2^25 clock cycles.
- * Assuming a minimum 33MHz clock this results in a 1s
- * delay before we can consider subordinate devices to
- * be re-initialized. PCIe has some ways to shorten this,
- * but we don't make use of them yet.
- */
- ssleep(1);
}
void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
@@ -4936,7 +4926,8 @@
{
pcibios_reset_secondary_bus(dev);
- return pci_dev_wait(dev, "bus reset", PCIE_RESET_READY_POLL_MS);
+ return pci_bridge_wait_for_secondary_bus(dev, "bus reset",
+ PCIE_RESET_READY_POLL_MS);
}
EXPORT_SYMBOL_GPL(pci_bridge_secondary_bus_reset);
@@ -6159,6 +6150,8 @@
{
u32 v;
+ /* Check PF if pdev is a VF, since VF Vendor/Device IDs are 0xffff */
+ pdev = pci_physfn(pdev);
if (pci_dev_is_disconnected(pdev))
return false;
return pci_bus_read_dev_vendor_id(pdev->bus, pdev->devfn, &v, 0);
--
Gitblit v1.6.2