From 102a0743326a03cd1a1202ceda21e175b7d3575c Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Tue, 20 Feb 2024 01:20:52 +0000
Subject: [PATCH] add new system file
---
kernel/drivers/irqchip/Kconfig | 251 ++++++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 234 insertions(+), 17 deletions(-)
diff --git a/kernel/drivers/irqchip/Kconfig b/kernel/drivers/irqchip/Kconfig
index 9d3812c..90d2e32 100644
--- a/kernel/drivers/irqchip/Kconfig
+++ b/kernel/drivers/irqchip/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
menu "IRQ chip support"
config IRQCHIP
@@ -6,7 +7,6 @@
config ARM_GIC
bool
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_MULTI_HANDLER
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
@@ -15,10 +15,10 @@
bool
depends on PM
select ARM_GIC
- select PM_CLK
config ARM_GIC_MAX_NR
int
+ depends on ARM_GIC
default 2 if ARCH_REALVIEW
default 1
@@ -33,7 +33,6 @@
config ARM_GIC_V3
bool
- select IRQ_DOMAIN
select GENERIC_IRQ_MULTI_HANDLER
select IRQ_DOMAIN_HIERARCHY
select PARTITION_PERCPU
@@ -59,7 +58,6 @@
config ARM_NVIC
bool
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_CHIP
@@ -88,6 +86,14 @@
depends on PCI
select PCI_MSI
select GENERIC_IRQ_CHIP
+
+config AL_FIC
+ bool "Amazon's Annapurna Labs Fabric Interrupt Controller"
+ depends on OF || COMPILE_TEST
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+ help
+ Support Amazon's Annapurna Labs Fabric Interrupt Controller.
config ATMEL_AIC_IRQ
bool
@@ -129,10 +135,20 @@
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
-config DW_APB_ICTL
+config DAVINCI_AINTC
bool
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+
+config DAVINCI_CP_INTC
+ bool
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
+
+config DW_APB_ICTL
+ bool
+ select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN_HIERARCHY
config FARADAY_FTINTC010
bool
@@ -150,12 +166,20 @@
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+config IXP4XX_IRQ
+ bool
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_MULTI_HANDLER
+ select SPARSE_IRQ
+
+config MADERA_IRQ
+ tristate
+
config IRQ_MIPS_CPU
bool
select GENERIC_IRQ_CHIP
- select GENERIC_IRQ_IPI if SYS_SUPPORTS_MULTITHREADING
+ select GENERIC_IRQ_IPI if SMP && SYS_SUPPORTS_MULTITHREADING
select IRQ_DOMAIN
- select IRQ_DOMAIN_HIERARCHY if GENERIC_IRQ_IPI
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
config CLPS711X_IRQCHIP
@@ -195,14 +219,39 @@
help
Support for the J-Core integrated AIC.
-config RENESAS_INTC_IRQPIN
+config RDA_INTC
bool
select IRQ_DOMAIN
+config RENESAS_INTC_IRQPIN
+ bool "Renesas INTC External IRQ Pin Support" if COMPILE_TEST
+ select IRQ_DOMAIN
+ help
+ Enable support for the Renesas Interrupt Controller for external
+ interrupt pins, as found on SH/R-Mobile and R-Car Gen1 SoCs.
+
config RENESAS_IRQC
- bool
+ bool "Renesas R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} IRQC support" if COMPILE_TEST
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
+ help
+ Enable support for the Renesas Interrupt Controller for external
+ devices, as found on R-Mobile APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs.
+
+config RENESAS_RZA1_IRQC
+ bool "Renesas RZ/A1 IRQC support" if COMPILE_TEST
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
+ to 8 external interrupts with configurable sense select.
+
+config SL28CPLD_INTC
+ bool "Kontron sl28cpld IRQ controller"
+ depends on MFD_SL28CPLD=y || COMPILE_TEST
+ select REGMAP_IRQ
+ help
+ Interrupt controller driver for the board management controller
+ found on the Kontron sl28 CPLD.
config ST_IRQCHIP
bool
@@ -264,7 +313,7 @@
config MIPS_GIC
bool
- select GENERIC_IRQ_IPI
+ select GENERIC_IRQ_IPI if SMP
select IRQ_DOMAIN_HIERARCHY
select MIPS_CM
@@ -273,13 +322,28 @@
depends on MACH_INGENIC
default y
+config INGENIC_TCU_IRQ
+ bool "Ingenic JZ47xx TCU interrupt controller"
+ default MACH_INGENIC
+ depends on MIPS || COMPILE_TEST
+ select MFD_SYSCON
+ select GENERIC_IRQ_CHIP
+ help
+ Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic
+ JZ47xx SoCs.
+
+ If unsure, say N.
+
config RENESAS_H8300H_INTC
bool
select IRQ_DOMAIN
config RENESAS_H8S_INTC
- bool
+ bool "Renesas H8S Interrupt Controller Support" if COMPILE_TEST
select IRQ_DOMAIN
+ help
+ Enable support for the Renesas H8/300 Interrupt Controller, as found
+ on Renesas H8S SoCs.
config IMX_GPCV2
bool
@@ -310,6 +374,13 @@
config MVEBU_PIC
bool
+config MVEBU_SEI
+ bool
+
+config LS_EXTIRQ
+ def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
+ select MFD_SYSCON
+
config LS_SCFG_MSI
def_bool y if SOC_LS1021A || ARCH_LAYERSCAPE
depends on PCI && PCI_MSI
@@ -332,7 +403,6 @@
config QCOM_IRQ_COMBINER
bool "QCOM IRQ combiner support"
depends on ARCH_QCOM && ACPI
- select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
help
Say yes here to add support for the IRQ combiner devices embedded
@@ -347,9 +417,9 @@
Support for the UniPhier AIDET (ARM Interrupt Detector).
config MESON_IRQ_GPIO
- bool "Meson GPIO Interrupt Multiplexer"
- depends on ARCH_MESON
- select IRQ_DOMAIN
+ tristate "Meson GPIO Interrupt Multiplexer"
+ depends on ARCH_MESON || COMPILE_TEST
+ default ARCH_MESON
select IRQ_DOMAIN_HIERARCHY
help
Support Meson SoC Family GPIO Interrupt Multiplexer
@@ -364,17 +434,103 @@
for Goldfish based virtual platforms.
config QCOM_PDC
- bool "QCOM PDC"
+ tristate "QCOM PDC"
depends on ARCH_QCOM
- select IRQ_DOMAIN
+ depends on QCOM_SCM || !QCOM_SCM
select IRQ_DOMAIN_HIERARCHY
help
Power Domain Controller driver to manage and configure wakeup
IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
+config CSKY_MPINTC
+ bool "C-SKY Multi Processor Interrupt Controller"
+ depends on CSKY
+ help
+ Say yes here to enable C-SKY SMP interrupt controller driver used
+ for C-SKY SMP system.
+ In fact it's not mmio map in hardware and it uses ld/st to visit the
+ controller's register inside CPU.
+
+config CSKY_APB_INTC
+ bool "C-SKY APB Interrupt Controller"
+ depends on CSKY
+ help
+ Say yes here to enable C-SKY APB interrupt controller driver used
+ by C-SKY single core SOC system. It uses mmio map apb-bus to visit
+ the controller's register.
+
+config IMX_IRQSTEER
+ bool "i.MX IRQSTEER support"
+ depends on ARCH_MXC || COMPILE_TEST
+ default ARCH_MXC
+ select IRQ_DOMAIN
+ help
+ Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+
+config IMX_INTMUX
+ bool "i.MX INTMUX support" if COMPILE_TEST
+ default y if ARCH_MXC
+ select IRQ_DOMAIN
+ help
+ Support for the i.MX INTMUX interrupt multiplexer.
+
+config LS1X_IRQ
+ bool "Loongson-1 Interrupt Controller"
+ depends on MACH_LOONGSON32
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-1 platform Interrupt Controller.
+
+config TI_SCI_INTR_IRQCHIP
+ bool
+ depends on TI_SCI_PROTOCOL
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ This enables the irqchip driver support for K3 Interrupt router
+ over TI System Control Interface available on some new TI's SoCs.
+ If you wish to use interrupt router irq resources managed by the
+ TI System Controller, say Y here. Otherwise, say N.
+
+config TI_SCI_INTA_IRQCHIP
+ bool
+ depends on TI_SCI_PROTOCOL
+ select IRQ_DOMAIN_HIERARCHY
+ select TI_SCI_INTA_MSI_DOMAIN
+ help
+ This enables the irqchip driver support for K3 Interrupt aggregator
+ over TI System Control Interface available on some new TI's SoCs.
+ If you wish to use interrupt aggregator irq resources managed by the
+ TI System Controller, say Y here. Otherwise, say N.
+
+config TI_PRUSS_INTC
+ tristate "TI PRU-ICSS Interrupt Controller"
+ depends on ARCH_DAVINCI || SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3
+ select IRQ_DOMAIN
+ help
+ This enables support for the PRU-ICSS Local Interrupt Controller
+ present within a PRU-ICSS subsystem present on various TI SoCs.
+ The PRUSS INTC enables various interrupts to be routed to multiple
+ different processors within the SoC.
+
+config RISCV_INTC
+ bool "RISC-V Local Interrupt Controller"
+ depends on RISCV
+ default y
+ help
+ This enables support for the per-HART local interrupt controller
+ found in standard RISC-V systems. The per-HART local interrupt
+ controller handles timer interrupts, software interrupts, and
+ hardware interrupts. Without a per-HART local interrupt controller,
+ a RISC-V system will be unable to handle any interrupts.
+
+ If you don't know what to do here, say Y.
+
config SIFIVE_PLIC
bool "SiFive Platform-Level Interrupt Controller"
depends on RISCV
+ select IRQ_DOMAIN_HIERARCHY
help
This enables support for the PLIC chip found in SiFive (and
potentially other) RISC-V systems. The PLIC controls devices
@@ -384,4 +540,65 @@
If you don't know what to do here, say Y.
+config EXYNOS_IRQ_COMBINER
+ bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
+ depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
+ help
+ Say yes here to add support for the IRQ combiner devices embedded
+ in Samsung Exynos chips.
+
+config LOONGSON_LIOINTC
+ bool "Loongson Local I/O Interrupt Controller"
+ depends on MACH_LOONGSON64
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson Local I/O Interrupt Controller.
+
+config LOONGSON_HTPIC
+ bool "Loongson3 HyperTransport PIC Controller"
+ depends on MACH_LOONGSON64
+ default y
+ select IRQ_DOMAIN
+ select GENERIC_IRQ_CHIP
+ help
+ Support for the Loongson-3 HyperTransport PIC Controller.
+
+config LOONGSON_HTVEC
+ bool "Loongson3 HyperTransport Interrupt Vector Controller"
+ depends on MACH_LOONGSON64
+ default MACH_LOONGSON64
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Support for the Loongson3 HyperTransport Interrupt Vector Controller.
+
+config LOONGSON_PCH_PIC
+ bool "Loongson PCH PIC Controller"
+ depends on MACH_LOONGSON64 || COMPILE_TEST
+ default MACH_LOONGSON64
+ select IRQ_DOMAIN_HIERARCHY
+ select IRQ_FASTEOI_HIERARCHY_HANDLERS
+ help
+ Support for the Loongson PCH PIC Controller.
+
+config LOONGSON_PCH_MSI
+ bool "Loongson PCH MSI Controller"
+ depends on MACH_LOONGSON64 || COMPILE_TEST
+ depends on PCI
+ default MACH_LOONGSON64
+ select IRQ_DOMAIN_HIERARCHY
+ select PCI_MSI
+ help
+ Support for the Loongson PCH MSI Controller.
+
+config MST_IRQ
+ bool "MStar Interrupt Controller"
+ depends on ARCH_MEDIATEK || ARCH_MSTARV7 || COMPILE_TEST
+ default ARCH_MEDIATEK
+ select IRQ_DOMAIN
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ Support MStar Interrupt Controller.
+
endmenu
--
Gitblit v1.6.2