From 093a6c67005148ae32a5c9e4553491b9f5c2457b Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:40:51 +0000
Subject: [PATCH] disable kernel build waring
---
kernel/include/linux/rculist.h | 173 +++++++++++++++++++++++++++++++++++++++++++++------------
1 files changed, 137 insertions(+), 36 deletions(-)
diff --git a/kernel/include/linux/rculist.h b/kernel/include/linux/rculist.h
index 4786c22..f8633d3 100644
--- a/kernel/include/linux/rculist.h
+++ b/kernel/include/linux/rculist.h
@@ -40,6 +40,42 @@
*/
#define list_next_rcu(list) (*((struct list_head __rcu **)(&(list)->next)))
+/**
+ * list_tail_rcu - returns the prev pointer of the head of the list
+ * @head: the head of the list
+ *
+ * Note: This should only be used with the list header, and even then
+ * only if list_del() and similar primitives are not also used on the
+ * list header.
+ */
+#define list_tail_rcu(head) (*((struct list_head __rcu **)(&(head)->prev)))
+
+/*
+ * Check during list traversal that we are within an RCU reader
+ */
+
+#define check_arg_count_one(dummy)
+
+#ifdef CONFIG_PROVE_RCU_LIST
+#define __list_check_rcu(dummy, cond, extra...) \
+ ({ \
+ check_arg_count_one(extra); \
+ RCU_LOCKDEP_WARN(!(cond) && !rcu_read_lock_any_held(), \
+ "RCU-list traversed in non-reader section!"); \
+ })
+
+#define __list_check_srcu(cond) \
+ ({ \
+ RCU_LOCKDEP_WARN(!(cond), \
+ "RCU-list traversed without holding the required lock!");\
+ })
+#else
+#define __list_check_rcu(dummy, cond, extra...) \
+ ({ check_arg_count_one(extra); })
+
+#define __list_check_srcu(cond) ({ })
+#endif
+
/*
* Insert a new entry between two known consecutive entries.
*
@@ -155,7 +191,7 @@
{
if (!hlist_unhashed(n)) {
__hlist_del(n);
- n->pprev = NULL;
+ WRITE_ONCE(n->pprev, NULL);
}
}
@@ -182,7 +218,7 @@
* @list: the RCU-protected list to splice
* @prev: points to the last element of the existing list
* @next: points to the first element of the existing list
- * @sync: function to sync: synchronize_rcu(), synchronize_sched(), ...
+ * @sync: synchronize_rcu, synchronize_rcu_expedited, ...
*
* The list pointed to by @prev and @next can be RCU-read traversed
* concurrently with this function.
@@ -220,6 +256,8 @@
*/
sync();
+ ASSERT_EXCLUSIVE_ACCESS(*first);
+ ASSERT_EXCLUSIVE_ACCESS(*last);
/*
* Readers are finished with the source list, so perform splice.
@@ -240,7 +278,7 @@
* designed for stacks.
* @list: the RCU-protected list to splice
* @head: the place in the existing list to splice the first list into
- * @sync: function to sync: synchronize_rcu(), synchronize_sched(), ...
+ * @sync: synchronize_rcu, synchronize_rcu_expedited, ...
*/
static inline void list_splice_init_rcu(struct list_head *list,
struct list_head *head,
@@ -255,7 +293,7 @@
* list, designed for queues.
* @list: the RCU-protected list to splice
* @head: the place in the existing list to splice the first list into
- * @sync: function to sync: synchronize_rcu(), synchronize_sched(), ...
+ * @sync: synchronize_rcu, synchronize_rcu_expedited, ...
*/
static inline void list_splice_tail_init_rcu(struct list_head *list,
struct list_head *head,
@@ -343,14 +381,35 @@
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_head within the struct.
+ * @cond: optional lockdep expression if called from non-RCU protection.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as list_add_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
-#define list_for_each_entry_rcu(pos, head, member) \
- for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
- &pos->member != (head); \
+#define list_for_each_entry_rcu(pos, head, member, cond...) \
+ for (__list_check_rcu(dummy, ## cond, 0), \
+ pos = list_entry_rcu((head)->next, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_for_each_entry_srcu - iterate over rcu list of given type
+ * @pos: the type * to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the list_head within the struct.
+ * @cond: lockdep expression for the lock required to traverse the list.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as list_add_rcu()
+ * as long as the traversal is guarded by srcu_read_lock().
+ * The lockdep expression srcu_read_lock_held() can be passed as the
+ * cond argument from read side.
+ */
+#define list_for_each_entry_srcu(pos, head, member, cond) \
+ for (__list_check_srcu(cond), \
+ pos = list_entry_rcu((head)->next, typeof(*pos), member); \
+ &pos->member != (head); \
pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
/**
@@ -359,13 +418,12 @@
* @type: the type of the struct this is embedded in.
* @member: the name of the list_head within the struct.
*
- * This primitive may safely run concurrently with the _rcu list-mutation
- * primitives such as list_add_rcu(), but requires some implicit RCU
- * read-side guarding. One example is running within a special
- * exception-time environment where preemption is disabled and where
- * lockdep cannot be invoked (in which case updaters must use RCU-sched,
- * as in synchronize_sched(), call_rcu_sched(), and friends). Another
- * example is when items are added to the list, but never deleted.
+ * This primitive may safely run concurrently with the _rcu
+ * list-mutation primitives such as list_add_rcu(), but requires some
+ * implicit RCU read-side guarding. One example is running within a special
+ * exception-time environment where preemption is disabled and where lockdep
+ * cannot be invoked. Another example is when items are added to the list,
+ * but never deleted.
*/
#define list_entry_lockless(ptr, type, member) \
container_of((typeof(ptr))READ_ONCE(ptr), type, member)
@@ -376,13 +434,12 @@
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
*
- * This primitive may safely run concurrently with the _rcu list-mutation
- * primitives such as list_add_rcu(), but requires some implicit RCU
- * read-side guarding. One example is running within a special
- * exception-time environment where preemption is disabled and where
- * lockdep cannot be invoked (in which case updaters must use RCU-sched,
- * as in synchronize_sched(), call_rcu_sched(), and friends). Another
- * example is when items are added to the list, but never deleted.
+ * This primitive may safely run concurrently with the _rcu
+ * list-mutation primitives such as list_add_rcu(), but requires some
+ * implicit RCU read-side guarding. One example is running within a special
+ * exception-time environment where preemption is disabled and where lockdep
+ * cannot be invoked. Another example is when items are added to the list,
+ * but never deleted.
*/
#define list_for_each_entry_lockless(pos, head, member) \
for (pos = list_entry_lockless((head)->next, typeof(*pos), member); \
@@ -455,7 +512,7 @@
static inline void hlist_del_rcu(struct hlist_node *n)
{
__hlist_del(n);
- n->pprev = LIST_POISON2;
+ WRITE_ONCE(n->pprev, LIST_POISON2);
}
/**
@@ -471,11 +528,32 @@
struct hlist_node *next = old->next;
new->next = next;
- new->pprev = old->pprev;
+ WRITE_ONCE(new->pprev, old->pprev);
rcu_assign_pointer(*(struct hlist_node __rcu **)new->pprev, new);
if (next)
- new->next->pprev = &new->next;
- old->pprev = LIST_POISON2;
+ WRITE_ONCE(new->next->pprev, &new->next);
+ WRITE_ONCE(old->pprev, LIST_POISON2);
+}
+
+/**
+ * hlists_swap_heads_rcu - swap the lists the hlist heads point to
+ * @left: The hlist head on the left
+ * @right: The hlist head on the right
+ *
+ * The lists start out as [@left ][node1 ... ] and
+ * [@right ][node2 ... ]
+ * The lists end up as [@left ][node2 ... ]
+ * [@right ][node1 ... ]
+ */
+static inline void hlists_swap_heads_rcu(struct hlist_head *left, struct hlist_head *right)
+{
+ struct hlist_node *node1 = left->first;
+ struct hlist_node *node2 = right->first;
+
+ rcu_assign_pointer(left->first, node2);
+ rcu_assign_pointer(right->first, node1);
+ WRITE_ONCE(node2->pprev, &left->first);
+ WRITE_ONCE(node1->pprev, &right->first);
}
/*
@@ -510,10 +588,10 @@
struct hlist_node *first = h->first;
n->next = first;
- n->pprev = &h->first;
+ WRITE_ONCE(n->pprev, &h->first);
rcu_assign_pointer(hlist_first_rcu(h), n);
if (first)
- first->pprev = &n->next;
+ WRITE_ONCE(first->pprev, &n->next);
}
/**
@@ -546,7 +624,7 @@
if (last) {
n->next = last->next;
- n->pprev = &last->next;
+ WRITE_ONCE(n->pprev, &last->next);
rcu_assign_pointer(hlist_next_rcu(last), n);
} else {
hlist_add_head_rcu(n, h);
@@ -574,10 +652,10 @@
static inline void hlist_add_before_rcu(struct hlist_node *n,
struct hlist_node *next)
{
- n->pprev = next->pprev;
+ WRITE_ONCE(n->pprev, next->pprev);
n->next = next;
rcu_assign_pointer(hlist_pprev_rcu(n), n);
- next->pprev = &n->next;
+ WRITE_ONCE(next->pprev, &n->next);
}
/**
@@ -602,10 +680,10 @@
struct hlist_node *prev)
{
n->next = prev->next;
- n->pprev = &prev->next;
+ WRITE_ONCE(n->pprev, &prev->next);
rcu_assign_pointer(hlist_next_rcu(prev), n);
if (n->next)
- n->next->pprev = &n->next;
+ WRITE_ONCE(n->next->pprev, &n->next);
}
#define __hlist_for_each_rcu(pos, head) \
@@ -618,13 +696,36 @@
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the hlist_node within the struct.
+ * @cond: optional lockdep expression if called from non-RCU protection.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
-#define hlist_for_each_entry_rcu(pos, head, member) \
- for (pos = hlist_entry_safe (rcu_dereference_raw(hlist_first_rcu(head)),\
+#define hlist_for_each_entry_rcu(pos, head, member, cond...) \
+ for (__list_check_rcu(dummy, ## cond, 0), \
+ pos = hlist_entry_safe(rcu_dereference_raw(hlist_first_rcu(head)),\
+ typeof(*(pos)), member); \
+ pos; \
+ pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\
+ &(pos)->member)), typeof(*(pos)), member))
+
+/**
+ * hlist_for_each_entry_srcu - iterate over rcu list of given type
+ * @pos: the type * to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the hlist_node within the struct.
+ * @cond: lockdep expression for the lock required to traverse the list.
+ *
+ * This list-traversal primitive may safely run concurrently with
+ * the _rcu list-mutation primitives such as hlist_add_head_rcu()
+ * as long as the traversal is guarded by srcu_read_lock().
+ * The lockdep expression srcu_read_lock_held() can be passed as the
+ * cond argument from read side.
+ */
+#define hlist_for_each_entry_srcu(pos, head, member, cond) \
+ for (__list_check_srcu(cond), \
+ pos = hlist_entry_safe(rcu_dereference_raw(hlist_first_rcu(head)),\
typeof(*(pos)), member); \
pos; \
pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\
@@ -644,10 +745,10 @@
* not do any RCU debugging or tracing.
*/
#define hlist_for_each_entry_rcu_notrace(pos, head, member) \
- for (pos = hlist_entry_safe (rcu_dereference_raw_notrace(hlist_first_rcu(head)),\
+ for (pos = hlist_entry_safe(rcu_dereference_raw_check(hlist_first_rcu(head)),\
typeof(*(pos)), member); \
pos; \
- pos = hlist_entry_safe(rcu_dereference_raw_notrace(hlist_next_rcu(\
+ pos = hlist_entry_safe(rcu_dereference_raw_check(hlist_next_rcu(\
&(pos)->member)), typeof(*(pos)), member))
/**
--
Gitblit v1.6.2