From 093a6c67005148ae32a5c9e4553491b9f5c2457b Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 10 May 2024 07:40:51 +0000
Subject: [PATCH] disable kernel build waring
---
kernel/include/linux/mtd/spi-nor.h | 292 ++++++++++++++++++++++++++++++---------------------------
1 files changed, 153 insertions(+), 139 deletions(-)
diff --git a/kernel/include/linux/mtd/spi-nor.h b/kernel/include/linux/mtd/spi-nor.h
index c922e97..36d354a 100644
--- a/kernel/include/linux/mtd/spi-nor.h
+++ b/kernel/include/linux/mtd/spi-nor.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef __LINUX_MTD_SPI_NOR_H
@@ -13,21 +9,7 @@
#include <linux/bitops.h>
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
-
-/*
- * Manufacturer IDs
- *
- * The first byte returned from the flash after sending opcode SPINOR_OP_RDID.
- * Sometimes these are the same as CFI IDs, but sometimes they aren't.
- */
-#define SNOR_MFR_ATMEL CFI_MFR_ATMEL
-#define SNOR_MFR_GIGADEVICE 0xc8
-#define SNOR_MFR_INTEL CFI_MFR_INTEL
-#define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */
-#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
-#define SNOR_MFR_SPANSION CFI_MFR_AMD
-#define SNOR_MFR_SST CFI_MFR_SST
-#define SNOR_MFR_WINBOND 0xef /* Also used by some Spansion */
+#include <linux/spi/spi-mem.h>
/*
* Note on opcode nomenclature: some opcodes have a format like
@@ -38,6 +20,7 @@
*/
/* Flash opcodes. */
+#define SPINOR_OP_WRDI 0x04 /* Write disable */
#define SPINOR_OP_WREN 0x06 /* Write enable */
#define SPINOR_OP_RDSR 0x05 /* Read status register */
#define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */
@@ -49,9 +32,13 @@
#define SPINOR_OP_READ_1_2_2 0xbb /* Read data bytes (Dual I/O SPI) */
#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad Output SPI) */
#define SPINOR_OP_READ_1_4_4 0xeb /* Read data bytes (Quad I/O SPI) */
+#define SPINOR_OP_READ_1_1_8 0x8b /* Read data bytes (Octal Output SPI) */
+#define SPINOR_OP_READ_1_8_8 0xcb /* Read data bytes (Octal I/O SPI) */
#define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */
#define SPINOR_OP_PP_1_1_4 0x32 /* Quad page program */
#define SPINOR_OP_PP_1_4_4 0x38 /* Quad page program */
+#define SPINOR_OP_PP_1_1_8 0x82 /* Octal page program */
+#define SPINOR_OP_PP_1_8_8 0xc2 /* Octal page program */
#define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */
#define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */
#define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */
@@ -60,6 +47,7 @@
#define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */
#define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */
#define SPINOR_OP_RDCR 0x35 /* Read configuration register */
+#define SPINOR_OP_WRCR 0x31 /* Write configure register */
#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
#define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */
#define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */
@@ -72,9 +60,13 @@
#define SPINOR_OP_READ_1_2_2_4B 0xbc /* Read data bytes (Dual I/O SPI) */
#define SPINOR_OP_READ_1_1_4_4B 0x6c /* Read data bytes (Quad Output SPI) */
#define SPINOR_OP_READ_1_4_4_4B 0xec /* Read data bytes (Quad I/O SPI) */
+#define SPINOR_OP_READ_1_1_8_4B 0x7c /* Read data bytes (Octal Output SPI) */
+#define SPINOR_OP_READ_1_8_8_4B 0xcc /* Read data bytes (Octal I/O SPI) */
#define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */
#define SPINOR_OP_PP_1_1_4_4B 0x34 /* Quad page program */
#define SPINOR_OP_PP_1_4_4_4B 0x3e /* Quad page program */
+#define SPINOR_OP_PP_1_1_8_4B 0x84 /* Octal page program */
+#define SPINOR_OP_PP_1_8_8_4B 0x8e /* Octal page program */
#define SPINOR_OP_BE_4K_4B 0x21 /* Erase 4KiB block */
#define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */
#define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */
@@ -90,7 +82,6 @@
/* Used for SST flashes only. */
#define SPINOR_OP_BP 0x02 /* Byte program */
-#define SPINOR_OP_WRDI 0x04 /* Write disable */
#define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */
/* Used for S3AN flashes only */
@@ -121,13 +112,18 @@
#define SR_BP0 BIT(2) /* Block protect 0 */
#define SR_BP1 BIT(3) /* Block protect 1 */
#define SR_BP2 BIT(4) /* Block protect 2 */
-#define SR_TB BIT(5) /* Top/Bottom protect */
+#define SR_BP3 BIT(5) /* Block protect 3 */
+#define SR_TB_BIT5 BIT(5) /* Top/Bottom protect */
+#define SR_BP3_BIT6 BIT(6) /* Block protect 3 */
+#define SR_TB_BIT6 BIT(6) /* Top/Bottom protect */
#define SR_SRWD BIT(7) /* SR write protect */
/* Spansion/Cypress specific status bits */
#define SR_E_ERR BIT(5)
#define SR_P_ERR BIT(6)
-#define SR_QUAD_EN_MX BIT(6) /* Macronix Quad I/O */
+#define SR1_QUAD_EN_BIT6 BIT(6)
+
+#define SR_BP_SHIFT 2
/* Enhanced Volatile Configuration Register bits */
#define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */
@@ -138,10 +134,9 @@
#define FSR_P_ERR BIT(4) /* Program operation status */
#define FSR_PT_ERR BIT(1) /* Protection error bit */
-/* Configuration Register bits. */
-#define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
-
/* Status Register 2 bits. */
+#define SR2_QUAD_EN_BIT1 BIT(1)
+#define SR2_QUAD_EN_BIT2 BIT(2)
#define SR2_QUAD_EN_BIT7 BIT(7)
/* Supported SPI protocols */
@@ -219,115 +214,6 @@
return spi_nor_get_protocol_data_nbits(proto);
}
-#define SPI_NOR_MAX_CMD_SIZE 8
-enum spi_nor_ops {
- SPI_NOR_OPS_READ = 0,
- SPI_NOR_OPS_WRITE,
- SPI_NOR_OPS_ERASE,
- SPI_NOR_OPS_LOCK,
- SPI_NOR_OPS_UNLOCK,
-};
-
-enum spi_nor_option_flags {
- SNOR_F_USE_FSR = BIT(0),
- SNOR_F_HAS_SR_TB = BIT(1),
- SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
- SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
- SNOR_F_READY_XSR_RDY = BIT(4),
- SNOR_F_USE_CLSR = BIT(5),
- SNOR_F_BROKEN_RESET = BIT(6),
-};
-
-/**
- * struct flash_info - Forward declaration of a structure used internally by
- * spi_nor_scan()
- */
-struct flash_info;
-
-/**
- * struct spi_nor - Structure for defining a the SPI NOR layer
- * @mtd: point to a mtd_info structure
- * @lock: the lock for the read/write/erase/lock/unlock operations
- * @dev: point to a spi device, or a spi nor controller device.
- * @info: spi-nor part JDEC MFR id and other info
- * @page_size: the page size of the SPI NOR
- * @addr_width: number of address bytes
- * @erase_opcode: the opcode for erasing a sector
- * @read_opcode: the read opcode
- * @read_dummy: the dummy needed by the read operation
- * @program_opcode: the program opcode
- * @sst_write_second: used by the SST write operation
- * @flags: flag options for the current SPI-NOR (SNOR_F_*)
- * @read_proto: the SPI protocol for read operations
- * @write_proto: the SPI protocol for write operations
- * @reg_proto the SPI protocol for read_reg/write_reg/erase operations
- * @cmd_buf: used by the write_reg
- * @prepare: [OPTIONAL] do some preparations for the
- * read/write/erase/lock/unlock operations
- * @unprepare: [OPTIONAL] do some post work after the
- * read/write/erase/lock/unlock operations
- * @read_reg: [DRIVER-SPECIFIC] read out the register
- * @write_reg: [DRIVER-SPECIFIC] write data to the register
- * @read: [DRIVER-SPECIFIC] read data from the SPI NOR
- * @write: [DRIVER-SPECIFIC] write data to the SPI NOR
- * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR
- * at the offset @offs; if not provided by the driver,
- * spi-nor will send the erase opcode via write_reg()
- * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR
- * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
- * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
- * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode
- * completely locked
- * @priv: the private data
- */
-struct spi_nor {
- struct mtd_info mtd;
- struct mutex lock;
- struct device *dev;
- const struct flash_info *info;
- u32 page_size;
- u8 addr_width;
- u8 erase_opcode;
- u8 read_opcode;
- u8 read_dummy;
- u8 program_opcode;
- enum spi_nor_protocol read_proto;
- enum spi_nor_protocol write_proto;
- enum spi_nor_protocol reg_proto;
- bool sst_write_second;
- u32 flags;
- u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
-
- int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
- void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
- int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
- int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
-
- ssize_t (*read)(struct spi_nor *nor, loff_t from,
- size_t len, u_char *read_buf);
- ssize_t (*write)(struct spi_nor *nor, loff_t to,
- size_t len, const u_char *write_buf);
- int (*erase)(struct spi_nor *nor, loff_t offs);
-
- int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
- int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
- int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
- int (*quad_enable)(struct spi_nor *nor);
-
- void *priv;
-};
-
-static inline void spi_nor_set_flash_node(struct spi_nor *nor,
- struct device_node *np)
-{
- mtd_set_of_node(&nor->mtd, np);
-}
-
-static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
-{
- return mtd_get_of_node(&nor->mtd);
-}
-
/**
* struct spi_nor_hwcaps - Structure for describing the hardware capabilies
* supported by the SPI controller (bus master).
@@ -340,7 +226,7 @@
/*
*(Fast) Read capabilities.
* MUST be ordered by priority: the higher bit position, the higher priority.
- * As a matter of performances, it is relevant to use Octo SPI protocols first,
+ * As a matter of performances, it is relevant to use Octal SPI protocols first,
* then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
* (Slow) Read.
*/
@@ -361,7 +247,7 @@
#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
-#define SNOR_HWCPAS_READ_OCTO GENMASK(14, 11)
+#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11)
#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
@@ -370,7 +256,7 @@
/*
* Page Program capabilities.
* MUST be ordered by priority: the higher bit position, the higher priority.
- * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the
+ * Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
* legacy SPI 1-1-1 protocol.
* Note that Dual Page Programs are not supported because there is no existing
* JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
@@ -384,11 +270,139 @@
#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
-#define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20)
+#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20)
#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
+#define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \
+ SNOR_HWCAPS_READ_4_4_4 | \
+ SNOR_HWCAPS_READ_8_8_8 | \
+ SNOR_HWCAPS_PP_4_4_4 | \
+ SNOR_HWCAPS_PP_8_8_8)
+
+#define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \
+ SNOR_HWCAPS_READ_1_2_2_DTR | \
+ SNOR_HWCAPS_READ_1_4_4_DTR | \
+ SNOR_HWCAPS_READ_1_8_8_DTR)
+
+#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \
+ SNOR_HWCAPS_PP_MASK)
+
+/* Forward declaration that is used in 'struct spi_nor_controller_ops' */
+struct spi_nor;
+
+/**
+ * struct spi_nor_controller_ops - SPI NOR controller driver specific
+ * operations.
+ * @prepare: [OPTIONAL] do some preparations for the
+ * read/write/erase/lock/unlock operations.
+ * @unprepare: [OPTIONAL] do some post work after the
+ * read/write/erase/lock/unlock operations.
+ * @read_reg: read out the register.
+ * @write_reg: write data to the register.
+ * @read: read data from the SPI NOR.
+ * @write: write data to the SPI NOR.
+ * @erase: erase a sector of the SPI NOR at the offset @offs; if
+ * not provided by the driver, SPI NOR will send the erase
+ * opcode via write_reg().
+ */
+struct spi_nor_controller_ops {
+ int (*prepare)(struct spi_nor *nor);
+ void (*unprepare)(struct spi_nor *nor);
+ int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, size_t len);
+ int (*write_reg)(struct spi_nor *nor, u8 opcode, const u8 *buf,
+ size_t len);
+
+ ssize_t (*read)(struct spi_nor *nor, loff_t from, size_t len, u8 *buf);
+ ssize_t (*write)(struct spi_nor *nor, loff_t to, size_t len,
+ const u8 *buf);
+ int (*erase)(struct spi_nor *nor, loff_t offs);
+};
+
+/*
+ * Forward declarations that are used internally by the core and manufacturer
+ * drivers.
+ */
+struct flash_info;
+struct spi_nor_manufacturer;
+struct spi_nor_flash_parameter;
+
+/**
+ * struct spi_nor - Structure for defining the SPI NOR layer
+ * @mtd: an mtd_info structure
+ * @lock: the lock for the read/write/erase/lock/unlock operations
+ * @dev: pointer to an SPI device or an SPI NOR controller device
+ * @spimem: pointer to the SPI memory device
+ * @bouncebuf: bounce buffer used when the buffer passed by the MTD
+ * layer is not DMA-able
+ * @bouncebuf_size: size of the bounce buffer
+ * @info: SPI NOR part JEDEC MFR ID and other info
+ * @manufacturer: SPI NOR manufacturer
+ * @page_size: the page size of the SPI NOR
+ * @addr_width: number of address bytes
+ * @erase_opcode: the opcode for erasing a sector
+ * @read_opcode: the read opcode
+ * @read_dummy: the dummy needed by the read operation
+ * @program_opcode: the program opcode
+ * @sst_write_second: used by the SST write operation
+ * @flags: flag options for the current SPI NOR (SNOR_F_*)
+ * @read_proto: the SPI protocol for read operations
+ * @write_proto: the SPI protocol for write operations
+ * @reg_proto: the SPI protocol for read_reg/write_reg/erase operations
+ * @controller_ops: SPI NOR controller driver specific operations.
+ * @params: [FLASH-SPECIFIC] SPI NOR flash parameters and settings.
+ * The structure includes legacy flash parameters and
+ * settings that can be overwritten by the spi_nor_fixups
+ * hooks, or dynamically when parsing the SFDP tables.
+ * @dirmap: pointers to struct spi_mem_dirmap_desc for reads/writes.
+ * @priv: pointer to the private data
+ */
+struct spi_nor {
+ struct mtd_info mtd;
+ struct mutex lock;
+ struct device *dev;
+ struct spi_mem *spimem;
+ u8 *bouncebuf;
+ size_t bouncebuf_size;
+ const struct flash_info *info;
+ const struct spi_nor_manufacturer *manufacturer;
+ u32 page_size;
+ u8 addr_width;
+ u8 erase_opcode;
+ u8 read_opcode;
+ u8 read_dummy;
+ u8 program_opcode;
+ enum spi_nor_protocol read_proto;
+ enum spi_nor_protocol write_proto;
+ enum spi_nor_protocol reg_proto;
+ bool sst_write_second;
+ u32 flags;
+
+ const struct spi_nor_controller_ops *controller_ops;
+
+ struct spi_nor_flash_parameter *params;
+
+ struct {
+ struct spi_mem_dirmap_desc *rdesc;
+ struct spi_mem_dirmap_desc *wdesc;
+ } dirmap;
+
+ struct miscdevice *misc_dev;
+ void *priv;
+};
+
+static inline void spi_nor_set_flash_node(struct spi_nor *nor,
+ struct device_node *np)
+{
+ mtd_set_of_node(&nor->mtd, np);
+}
+
+static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
+{
+ return mtd_get_of_node(&nor->mtd);
+}
+
/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
--
Gitblit v1.6.2