From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/tools/gpio/gpio-utils.c | 187 ++++++++++++++++++++++++++++++++++++----------
1 files changed, 145 insertions(+), 42 deletions(-)
diff --git a/kernel/tools/gpio/gpio-utils.c b/kernel/tools/gpio/gpio-utils.c
index cf7e2f3..37187e0 100644
--- a/kernel/tools/gpio/gpio-utils.c
+++ b/kernel/tools/gpio/gpio-utils.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* GPIO tools - helpers library for the GPIO tools
*
* Copyright (C) 2015 Linus Walleij
* Copyright (C) 2016 Bamvor Jian Zhang
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
*/
#include <unistd.h>
@@ -20,7 +17,7 @@
#include <linux/gpio.h>
#include "gpio-utils.h"
-#define COMSUMER "gpio-utils"
+#define CONSUMER "gpio-utils"
/**
* doc: Operation of gpio
@@ -41,7 +38,7 @@
* such as "gpiochip0"
* @lines: An array desired lines, specified by offset
* index for the associated GPIO device.
- * @nline: The number of lines to request.
+ * @num_lines: The number of lines to request.
* @flag: The new flag for requsted gpio. Reference
* "linux/gpio.h" for the meaning of flag.
* @data: Default value will be set to gpio when flag is
@@ -59,7 +56,7 @@
* On failure return the errno.
*/
int gpiotools_request_linehandle(const char *device_name, unsigned int *lines,
- unsigned int nlines, unsigned int flag,
+ unsigned int num_lines, unsigned int flag,
struct gpiohandle_data *data,
const char *consumer_label)
{
@@ -78,15 +75,15 @@
ret = -errno;
fprintf(stderr, "Failed to open %s, %s\n",
chrdev_name, strerror(errno));
- goto exit_close_error;
+ goto exit_free_name;
}
- for (i = 0; i < nlines; i++)
+ for (i = 0; i < num_lines; i++)
req.lineoffsets[i] = lines[i];
req.flags = flag;
strcpy(req.consumer_label, consumer_label);
- req.lines = nlines;
+ req.lines = num_lines;
if (flag & GPIOHANDLE_REQUEST_OUTPUT)
memcpy(req.default_values, data, sizeof(req.default_values));
@@ -97,26 +94,93 @@
"GPIO_GET_LINEHANDLE_IOCTL", ret, strerror(errno));
}
-exit_close_error:
if (close(fd) == -1)
perror("Failed to close GPIO character device file");
+exit_free_name:
free(chrdev_name);
return ret < 0 ? ret : req.fd;
}
+
+/**
+ * gpiotools_request_line() - request gpio lines in a gpiochip
+ * @device_name: The name of gpiochip without prefix "/dev/",
+ * such as "gpiochip0"
+ * @lines: An array desired lines, specified by offset
+ * index for the associated GPIO device.
+ * @num_lines: The number of lines to request.
+ * @config: The new config for requested gpio. Reference
+ * "linux/gpio.h" for config details.
+ * @consumer: The name of consumer, such as "sysfs",
+ * "powerkey". This is useful for other users to
+ * know who is using.
+ *
+ * Request gpio lines through the ioctl provided by chardev. User
+ * could call gpiotools_set_values() and gpiotools_get_values() to
+ * read and write respectively through the returned fd. Call
+ * gpiotools_release_line() to release these lines after that.
+ *
+ * Return: On success return the fd;
+ * On failure return the errno.
+ */
+int gpiotools_request_line(const char *device_name, unsigned int *lines,
+ unsigned int num_lines,
+ struct gpio_v2_line_config *config,
+ const char *consumer)
+{
+ struct gpio_v2_line_request req;
+ char *chrdev_name;
+ int fd;
+ int i;
+ int ret;
+
+ ret = asprintf(&chrdev_name, "/dev/%s", device_name);
+ if (ret < 0)
+ return -ENOMEM;
+
+ fd = open(chrdev_name, 0);
+ if (fd == -1) {
+ ret = -errno;
+ fprintf(stderr, "Failed to open %s, %s\n",
+ chrdev_name, strerror(errno));
+ goto exit_free_name;
+ }
+
+ memset(&req, 0, sizeof(req));
+ for (i = 0; i < num_lines; i++)
+ req.offsets[i] = lines[i];
+
+ req.config = *config;
+ strcpy(req.consumer, consumer);
+ req.num_lines = num_lines;
+
+ ret = ioctl(fd, GPIO_V2_GET_LINE_IOCTL, &req);
+ if (ret == -1) {
+ ret = -errno;
+ fprintf(stderr, "Failed to issue %s (%d), %s\n",
+ "GPIO_GET_LINE_IOCTL", ret, strerror(errno));
+ }
+
+ if (close(fd) == -1)
+ perror("Failed to close GPIO character device file");
+exit_free_name:
+ free(chrdev_name);
+ return ret < 0 ? ret : req.fd;
+}
+
/**
* gpiotools_set_values(): Set the value of gpio(s)
* @fd: The fd returned by
- * gpiotools_request_linehandle().
- * @data: The array of values want to set.
+ * gpiotools_request_line().
+ * @values: The array of values want to set.
*
* Return: On success return 0;
* On failure return the errno.
*/
-int gpiotools_set_values(const int fd, struct gpiohandle_data *data)
+int gpiotools_set_values(const int fd, struct gpio_v2_line_values *values)
{
int ret;
- ret = ioctl(fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, data);
+ ret = ioctl(fd, GPIO_V2_LINE_SET_VALUES_IOCTL, values);
if (ret == -1) {
ret = -errno;
fprintf(stderr, "Failed to issue %s (%d), %s\n",
@@ -130,17 +194,17 @@
/**
* gpiotools_get_values(): Get the value of gpio(s)
* @fd: The fd returned by
- * gpiotools_request_linehandle().
- * @data: The array of values get from hardware.
+ * gpiotools_request_line().
+ * @values: The array of values get from hardware.
*
* Return: On success return 0;
* On failure return the errno.
*/
-int gpiotools_get_values(const int fd, struct gpiohandle_data *data)
+int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values)
{
int ret;
- ret = ioctl(fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, data);
+ ret = ioctl(fd, GPIO_V2_LINE_GET_VALUES_IOCTL, values);
if (ret == -1) {
ret = -errno;
fprintf(stderr, "Failed to issue %s (%d), %s\n",
@@ -173,6 +237,27 @@
}
/**
+ * gpiotools_release_line(): Release the line(s) of gpiochip
+ * @fd: The fd returned by
+ * gpiotools_request_line().
+ *
+ * Return: On success return 0;
+ * On failure return the errno.
+ */
+int gpiotools_release_line(const int fd)
+{
+ int ret;
+
+ ret = close(fd);
+ if (ret == -1) {
+ perror("Failed to close GPIO LINE device file");
+ ret = -errno;
+ }
+
+ return ret;
+}
+
+/**
* gpiotools_get(): Get value from specific line
* @device_name: The name of gpiochip without prefix "/dev/",
* such as "gpiochip0"
@@ -183,11 +268,14 @@
*/
int gpiotools_get(const char *device_name, unsigned int line)
{
- struct gpiohandle_data data;
+ int ret;
+ unsigned int value;
unsigned int lines[] = {line};
- gpiotools_gets(device_name, lines, 1, &data);
- return data.values[0];
+ ret = gpiotools_gets(device_name, lines, 1, &value);
+ if (ret)
+ return ret;
+ return value;
}
@@ -197,28 +285,36 @@
* such as "gpiochip0".
* @lines: An array desired lines, specified by offset
* index for the associated GPIO device.
- * @nline: The number of lines to request.
- * @data: The array of values get from gpiochip.
+ * @num_lines: The number of lines to request.
+ * @values: The array of values get from gpiochip.
*
* Return: On success return 0;
* On failure return the errno.
*/
int gpiotools_gets(const char *device_name, unsigned int *lines,
- unsigned int nlines, struct gpiohandle_data *data)
+ unsigned int num_lines, unsigned int *values)
{
- int fd;
+ int fd, i;
int ret;
int ret_close;
+ struct gpio_v2_line_config config;
+ struct gpio_v2_line_values lv;
- ret = gpiotools_request_linehandle(device_name, lines, nlines,
- GPIOHANDLE_REQUEST_INPUT, data,
- COMSUMER);
+ memset(&config, 0, sizeof(config));
+ config.flags = GPIO_V2_LINE_FLAG_INPUT;
+ ret = gpiotools_request_line(device_name, lines, num_lines,
+ &config, CONSUMER);
if (ret < 0)
return ret;
fd = ret;
- ret = gpiotools_get_values(fd, data);
- ret_close = gpiotools_release_linehandle(fd);
+ for (i = 0; i < num_lines; i++)
+ gpiotools_set_bit(&lv.mask, i);
+ ret = gpiotools_get_values(fd, &lv);
+ if (!ret)
+ for (i = 0; i < num_lines; i++)
+ values[i] = gpiotools_test_bit(lv.bits, i);
+ ret_close = gpiotools_release_line(fd);
return ret < 0 ? ret : ret_close;
}
@@ -235,11 +331,9 @@
int gpiotools_set(const char *device_name, unsigned int line,
unsigned int value)
{
- struct gpiohandle_data data;
unsigned int lines[] = {line};
- data.values[0] = value;
- return gpiotools_sets(device_name, lines, 1, &data);
+ return gpiotools_sets(device_name, lines, 1, &value);
}
/**
@@ -248,23 +342,32 @@
* such as "gpiochip0".
* @lines: An array desired lines, specified by offset
* index for the associated GPIO device.
- * @nline: The number of lines to request.
- * @data: The array of values set to gpiochip, must be
+ * @num_lines: The number of lines to request.
+ * @value: The array of values set to gpiochip, must be
* 0(low) or 1(high).
*
* Return: On success return 0;
* On failure return the errno.
*/
int gpiotools_sets(const char *device_name, unsigned int *lines,
- unsigned int nlines, struct gpiohandle_data *data)
+ unsigned int num_lines, unsigned int *values)
{
- int ret;
+ int ret, i;
+ struct gpio_v2_line_config config;
- ret = gpiotools_request_linehandle(device_name, lines, nlines,
- GPIOHANDLE_REQUEST_OUTPUT, data,
- COMSUMER);
+ memset(&config, 0, sizeof(config));
+ config.flags = GPIO_V2_LINE_FLAG_OUTPUT;
+ config.num_attrs = 1;
+ config.attrs[0].attr.id = GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES;
+ for (i = 0; i < num_lines; i++) {
+ gpiotools_set_bit(&config.attrs[0].mask, i);
+ gpiotools_assign_bit(&config.attrs[0].attr.values,
+ i, values[i]);
+ }
+ ret = gpiotools_request_line(device_name, lines, num_lines,
+ &config, CONSUMER);
if (ret < 0)
return ret;
- return gpiotools_release_linehandle(ret);
+ return gpiotools_release_line(ret);
}
--
Gitblit v1.6.2