From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/drivers/regulator/max8952.c | 88 ++++++++++++++++++-------------------------
1 files changed, 37 insertions(+), 51 deletions(-)
diff --git a/kernel/drivers/regulator/max8952.c b/kernel/drivers/regulator/max8952.c
index f1e77ed..ccd5da6 100644
--- a/kernel/drivers/regulator/max8952.c
+++ b/kernel/drivers/regulator/max8952.c
@@ -1,22 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* max8952.c - Voltage and current regulation for the Maxim 8952
*
* Copyright (C) 2010 Samsung Electronics
* MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
@@ -26,11 +13,9 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/max8952.h>
-#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
@@ -50,7 +35,8 @@
struct max8952_data {
struct i2c_client *client;
struct max8952_platform_data *pdata;
-
+ struct gpio_desc *vid0_gpiod;
+ struct gpio_desc *vid1_gpiod;
bool vid0;
bool vid1;
};
@@ -100,16 +86,15 @@
{
struct max8952_data *max8952 = rdev_get_drvdata(rdev);
- if (!gpio_is_valid(max8952->pdata->gpio_vid0) ||
- !gpio_is_valid(max8952->pdata->gpio_vid1)) {
+ if (!max8952->vid0_gpiod || !max8952->vid1_gpiod) {
/* DVS not supported */
return -EPERM;
}
max8952->vid0 = selector & 0x1;
max8952->vid1 = (selector >> 1) & 0x1;
- gpio_set_value(max8952->pdata->gpio_vid0, max8952->vid0);
- gpio_set_value(max8952->pdata->gpio_vid1, max8952->vid1);
+ gpiod_set_value(max8952->vid0_gpiod, max8952->vid0);
+ gpiod_set_value(max8952->vid1_gpiod, max8952->vid1);
return 0;
}
@@ -146,9 +131,6 @@
pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
if (!pd)
return NULL;
-
- pd->gpio_vid0 = of_get_named_gpio(np, "max8952,vid-gpios", 0);
- pd->gpio_vid1 = of_get_named_gpio(np, "max8952,vid-gpios", 1);
if (of_property_read_u32(np, "max8952,default-mode", &pd->default_mode))
dev_warn(dev, "Default mode not specified, assuming 0\n");
@@ -192,7 +174,7 @@
static int max8952_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
- struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct i2c_adapter *adapter = client->adapter;
struct max8952_platform_data *pdata = dev_get_platdata(&client->dev);
struct regulator_config config = { };
struct max8952_data *max8952;
@@ -200,7 +182,7 @@
struct gpio_desc *gpiod;
enum gpiod_flags gflags;
- int ret = 0, err = 0;
+ int ret = 0;
if (client->dev.of_node)
pdata = max8952_parse_dt(&client->dev);
@@ -230,9 +212,14 @@
gflags = GPIOD_OUT_HIGH;
else
gflags = GPIOD_OUT_LOW;
- gpiod = devm_gpiod_get_optional(&client->dev,
- "max8952,en",
- gflags);
+ gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
+ /*
+ * Do not use devm* here: the regulator core takes over the
+ * lifecycle management of the GPIO descriptor.
+ */
+ gpiod = gpiod_get_optional(&client->dev,
+ "max8952,en",
+ gflags);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
if (gpiod)
@@ -248,32 +235,31 @@
max8952->vid0 = pdata->default_mode & 0x1;
max8952->vid1 = (pdata->default_mode >> 1) & 0x1;
- if (gpio_is_valid(pdata->gpio_vid0) &&
- gpio_is_valid(pdata->gpio_vid1)) {
- unsigned long gpio_flags;
+ /* Fetch vid0 and vid1 GPIOs if available */
+ gflags = max8952->vid0 ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+ max8952->vid0_gpiod = devm_gpiod_get_index_optional(&client->dev,
+ "max8952,vid",
+ 0, gflags);
+ if (IS_ERR(max8952->vid0_gpiod))
+ return PTR_ERR(max8952->vid0_gpiod);
+ gflags = max8952->vid1 ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+ max8952->vid1_gpiod = devm_gpiod_get_index_optional(&client->dev,
+ "max8952,vid",
+ 1, gflags);
+ if (IS_ERR(max8952->vid1_gpiod))
+ return PTR_ERR(max8952->vid1_gpiod);
- gpio_flags = max8952->vid0 ?
- GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
- if (devm_gpio_request_one(&client->dev, pdata->gpio_vid0,
- gpio_flags, "MAX8952 VID0"))
- err = 1;
-
- gpio_flags = max8952->vid1 ?
- GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
- if (devm_gpio_request_one(&client->dev, pdata->gpio_vid1,
- gpio_flags, "MAX8952 VID1"))
- err = 2;
- } else
- err = 3;
-
- if (err) {
+ /* If either VID GPIO is missing just disable this */
+ if (!max8952->vid0_gpiod || !max8952->vid1_gpiod) {
dev_warn(&client->dev, "VID0/1 gpio invalid: "
- "DVS not available.\n");
+ "DVS not available.\n");
max8952->vid0 = 0;
max8952->vid1 = 0;
- /* Mark invalid */
- pdata->gpio_vid0 = -1;
- pdata->gpio_vid1 = -1;
+ /* Make sure if we have any descriptors they get set to low */
+ if (max8952->vid0_gpiod)
+ gpiod_set_value(max8952->vid0_gpiod, 0);
+ if (max8952->vid1_gpiod)
+ gpiod_set_value(max8952->vid1_gpiod, 0);
/* Disable Pulldown of EN only */
max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60);
--
Gitblit v1.6.2