From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/drivers/net/wireless/intersil/hostap/hostap_pci.c | 33 ++++++++++-----------------------
1 files changed, 10 insertions(+), 23 deletions(-)
diff --git a/kernel/drivers/net/wireless/intersil/hostap/hostap_pci.c b/kernel/drivers/net/wireless/intersil/hostap/hostap_pci.c
index c864ef4..101887e 100644
--- a/kernel/drivers/net/wireless/intersil/hostap/hostap_pci.c
+++ b/kernel/drivers/net/wireless/intersil/hostap/hostap_pci.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
#define PRISM2_PCI
/* Host AP driver's support for Intersil Prism2.5 PCI cards is based on
@@ -402,36 +403,23 @@
pci_disable_device(pdev);
}
-
-#ifdef CONFIG_PM
-static int prism2_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused prism2_pci_suspend(struct device *dev_d)
{
- struct net_device *dev = pci_get_drvdata(pdev);
+ struct net_device *dev = dev_get_drvdata(dev_d);
if (netif_running(dev)) {
netif_stop_queue(dev);
netif_device_detach(dev);
}
prism2_suspend(dev);
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
-static int prism2_pci_resume(struct pci_dev *pdev)
+static int __maybe_unused prism2_pci_resume(struct device *dev_d)
{
- struct net_device *dev = pci_get_drvdata(pdev);
- int err;
+ struct net_device *dev = dev_get_drvdata(dev_d);
- err = pci_enable_device(pdev);
- if (err) {
- printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
- dev->name);
- return err;
- }
- pci_restore_state(pdev);
prism2_hw_config(dev, 0);
if (netif_running(dev)) {
netif_device_attach(dev);
@@ -440,20 +428,19 @@
return 0;
}
-#endif /* CONFIG_PM */
-
MODULE_DEVICE_TABLE(pci, prism2_pci_id_table);
+
+static SIMPLE_DEV_PM_OPS(prism2_pci_pm_ops,
+ prism2_pci_suspend,
+ prism2_pci_resume);
static struct pci_driver prism2_pci_driver = {
.name = "hostap_pci",
.id_table = prism2_pci_id_table,
.probe = prism2_pci_probe,
.remove = prism2_pci_remove,
-#ifdef CONFIG_PM
- .suspend = prism2_pci_suspend,
- .resume = prism2_pci_resume,
-#endif /* CONFIG_PM */
+ .driver.pm = &prism2_pci_pm_ops,
};
module_pci_driver(prism2_pci_driver);
--
Gitblit v1.6.2