From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c | 26 ++++++++++++++++----------
1 files changed, 16 insertions(+), 10 deletions(-)
diff --git a/kernel/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/kernel/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
index 4392c15..564c47c 100644
--- a/kernel/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
+++ b/kernel/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
@@ -1,16 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
- * platform_bcm43xx.c: bcm43xx platform data initilization file
+ * platform_bcm43xx.c: bcm43xx platform data initialization file
*
* (C) Copyright 2016 Intel Corporation
* Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
*/
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -43,9 +39,7 @@
* real voltage and signaling are still 1.8V.
*/
.microvolts = 2000000, /* 1.8V */
- .gpio = -EINVAL,
.startup_delay = 250 * 1000, /* 250ms */
- .enable_high = 1, /* active high */
.enabled_at_boot = 0, /* disabled at boot */
.init_data = &bcm43xx_vmmc_data,
};
@@ -58,11 +52,23 @@
},
};
+static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("0000:00:0c.0", -1, NULL, GPIO_ACTIVE_LOW),
+ {}
+ },
+};
+
static int __init bcm43xx_regulator_register(void)
{
+ struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table;
+ struct gpiod_lookup *lookup = table->table;
int ret;
- bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
+ lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
+ gpiod_add_lookup_table(table);
+
ret = platform_device_register(&bcm43xx_vmmc_regulator);
if (ret) {
pr_err("%s: vmmc regulator register failed\n", __func__);
--
Gitblit v1.6.2