From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/powerpc/platforms/pseries/eeh_pseries.c | 852 ++++++++++++++++++++++++++++----------------------------
1 files changed, 432 insertions(+), 420 deletions(-)
diff --git a/kernel/arch/powerpc/platforms/pseries/eeh_pseries.c b/kernel/arch/powerpc/platforms/pseries/eeh_pseries.c
index 823cb27..7ed38eb 100644
--- a/kernel/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/kernel/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* The file intends to implement the platform dependent EEH operations on pseries.
* Actually, the pseries platform is built based on RTAS heavily. That means the
@@ -9,20 +10,6 @@
* Copyright IBM Corporation 2001, 2005, 2006
* Copyright Dave Engebretsen & Todd Inglett 2001
* Copyright Linas Vepstas 2005, 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/atomic.h>
@@ -37,6 +24,7 @@
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
+#include <linux/crash_dump.h>
#include <asm/eeh.h>
#include <asm/eeh_event.h>
@@ -55,42 +43,196 @@
static int ibm_get_config_addr_info2;
static int ibm_configure_pe;
-#ifdef CONFIG_PCI_IOV
void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
{
struct pci_dn *pdn = pci_get_pdn(pdev);
- struct pci_dn *physfn_pdn;
- struct eeh_dev *edev;
- if (!pdev->is_virtfn)
+ if (eeh_has_flag(EEH_FORCE_DISABLED))
return;
- pdn->device_id = pdev->device;
- pdn->vendor_id = pdev->vendor;
- pdn->class_code = pdev->class;
- /*
- * Last allow unfreeze return code used for retrieval
- * by user space in eeh-sysfs to show the last command
- * completion from platform.
- */
- pdn->last_allow_rc = 0;
- physfn_pdn = pci_get_pdn(pdev->physfn);
- pdn->pe_number = physfn_pdn->pe_num_map[pdn->vf_index];
- edev = pdn_to_eeh_dev(pdn);
-
- /*
- * The following operations will fail if VF's sysfs files
- * aren't created or its resources aren't finalized.
- */
- eeh_add_device_early(pdn);
- eeh_add_device_late(pdev);
- edev->pe_config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
- eeh_rmv_from_parent_pe(edev); /* Remove as it is adding to bus pe */
- eeh_add_to_parent_pe(edev); /* Add as VF PE type */
- eeh_sysfs_add_device(pdev);
-
-}
+ dev_dbg(&pdev->dev, "EEH: Setting up device\n");
+#ifdef CONFIG_PCI_IOV
+ if (pdev->is_virtfn) {
+ pdn->device_id = pdev->device;
+ pdn->vendor_id = pdev->vendor;
+ pdn->class_code = pdev->class;
+ /*
+ * Last allow unfreeze return code used for retrieval
+ * by user space in eeh-sysfs to show the last command
+ * completion from platform.
+ */
+ pdn->last_allow_rc = 0;
+ }
#endif
+ pseries_eeh_init_edev(pdn);
+#ifdef CONFIG_PCI_IOV
+ if (pdev->is_virtfn) {
+ /*
+ * FIXME: This really should be handled by choosing the right
+ * parent PE in in pseries_eeh_init_edev().
+ */
+ struct eeh_pe *physfn_pe = pci_dev_to_eeh_dev(pdev->physfn)->pe;
+ struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+
+ edev->pe_config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
+ eeh_pe_tree_remove(edev); /* Remove as it is adding to bus pe */
+ eeh_pe_tree_insert(edev, physfn_pe); /* Add as VF PE type */
+ }
+#endif
+ eeh_probe_device(pdev);
+}
+
+
+/**
+ * pseries_eeh_get_pe_config_addr - Find the pe_config_addr for a device
+ * @pdn: pci_dn of the input device
+ *
+ * The EEH RTAS calls use a tuple consisting of: (buid_hi, buid_lo,
+ * pe_config_addr) as a handle to a given PE. This function finds the
+ * pe_config_addr based on the device's config addr.
+ *
+ * Keep in mind that the pe_config_addr *might* be numerically identical to the
+ * device's config addr, but the two are conceptually distinct.
+ *
+ * Returns the pe_config_addr, or a negative error code.
+ */
+static int pseries_eeh_get_pe_config_addr(struct pci_dn *pdn)
+{
+ int config_addr = rtas_config_addr(pdn->busno, pdn->devfn, 0);
+ struct pci_controller *phb = pdn->phb;
+ int ret, rets[3];
+
+ if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
+ /*
+ * First of all, use function 1 to determine if this device is
+ * part of a PE or not. ret[0] being zero indicates it's not.
+ */
+ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
+ config_addr, BUID_HI(phb->buid),
+ BUID_LO(phb->buid), 1);
+ if (ret || (rets[0] == 0))
+ return -ENOENT;
+
+ /* Retrieve the associated PE config address with function 0 */
+ ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
+ config_addr, BUID_HI(phb->buid),
+ BUID_LO(phb->buid), 0);
+ if (ret) {
+ pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
+ __func__, phb->global_number, config_addr);
+ return -ENXIO;
+ }
+
+ return rets[0];
+ }
+
+ if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
+ config_addr, BUID_HI(phb->buid),
+ BUID_LO(phb->buid), 0);
+ if (ret) {
+ pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
+ __func__, phb->global_number, config_addr);
+ return -ENXIO;
+ }
+
+ return rets[0];
+ }
+
+ /*
+ * PAPR does describe a process for finding the pe_config_addr that was
+ * used before the ibm,get-config-addr-info calls were added. However,
+ * I haven't found *any* systems that don't have that RTAS call
+ * implemented. If you happen to find one that needs the old DT based
+ * process, patches are welcome!
+ */
+ return -ENOENT;
+}
+
+/**
+ * pseries_eeh_phb_reset - Reset the specified PHB
+ * @phb: PCI controller
+ * @config_adddr: the associated config address
+ * @option: reset option
+ *
+ * Reset the specified PHB/PE
+ */
+static int pseries_eeh_phb_reset(struct pci_controller *phb, int config_addr, int option)
+{
+ int ret;
+
+ /* Reset PE through RTAS call */
+ ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+ config_addr, BUID_HI(phb->buid),
+ BUID_LO(phb->buid), option);
+
+ /* If fundamental-reset not supported, try hot-reset */
+ if (option == EEH_RESET_FUNDAMENTAL && ret == -8) {
+ option = EEH_RESET_HOT;
+ ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
+ config_addr, BUID_HI(phb->buid),
+ BUID_LO(phb->buid), option);
+ }
+
+ /* We need reset hold or settlement delay */
+ if (option == EEH_RESET_FUNDAMENTAL || option == EEH_RESET_HOT)
+ msleep(EEH_PE_RST_HOLD_TIME);
+ else
+ msleep(EEH_PE_RST_SETTLE_TIME);
+
+ return ret;
+}
+
+/**
+ * pseries_eeh_phb_configure_bridge - Configure PCI bridges in the indicated PE
+ * @phb: PCI controller
+ * @config_adddr: the associated config address
+ *
+ * The function will be called to reconfigure the bridges included
+ * in the specified PE so that the mulfunctional PE would be recovered
+ * again.
+ */
+static int pseries_eeh_phb_configure_bridge(struct pci_controller *phb, int config_addr)
+{
+ int ret;
+ /* Waiting 0.2s maximum before skipping configuration */
+ int max_wait = 200;
+
+ while (max_wait > 0) {
+ ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
+ config_addr, BUID_HI(phb->buid),
+ BUID_LO(phb->buid));
+
+ if (!ret)
+ return ret;
+ if (ret < 0)
+ break;
+
+ /*
+ * If RTAS returns a delay value that's above 100ms, cut it
+ * down to 100ms in case firmware made a mistake. For more
+ * on how these delay values work see rtas_busy_delay_time
+ */
+ if (ret > RTAS_EXTENDED_DELAY_MIN+2 &&
+ ret <= RTAS_EXTENDED_DELAY_MAX)
+ ret = RTAS_EXTENDED_DELAY_MIN+2;
+
+ max_wait -= rtas_busy_delay_time(ret);
+
+ if (max_wait < 0)
+ break;
+
+ rtas_busy_delay(ret);
+ }
+
+ pr_warn("%s: Unable to configure bridge PHB#%x-PE#%x (%d)\n",
+ __func__, phb->global_number, config_addr, ret);
+ /* PAPR defines -3 as "Parameter Error" for this function: */
+ if (ret == -3)
+ return -EINVAL;
+ else
+ return -EIO;
+}
/*
* Buffer for reporting slot-error-detail rtas calls. Its here
@@ -100,70 +242,6 @@
static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
static DEFINE_SPINLOCK(slot_errbuf_lock);
static int eeh_error_buf_size;
-
-/**
- * pseries_eeh_init - EEH platform dependent initialization
- *
- * EEH platform dependent initialization on pseries.
- */
-static int pseries_eeh_init(void)
-{
- /* figure out EEH RTAS function call tokens */
- ibm_set_eeh_option = rtas_token("ibm,set-eeh-option");
- ibm_set_slot_reset = rtas_token("ibm,set-slot-reset");
- ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2");
- ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
- ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
- ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
- ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
- ibm_configure_pe = rtas_token("ibm,configure-pe");
-
- /*
- * ibm,configure-pe and ibm,configure-bridge have the same semantics,
- * however ibm,configure-pe can be faster. If we can't find
- * ibm,configure-pe then fall back to using ibm,configure-bridge.
- */
- if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE)
- ibm_configure_pe = rtas_token("ibm,configure-bridge");
-
- /*
- * Necessary sanity check. We needn't check "get-config-addr-info"
- * and its variant since the old firmware probably support address
- * of domain/bus/slot/function for EEH RTAS operations.
- */
- if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE ||
- ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE ||
- (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
- ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) ||
- ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE ||
- ibm_configure_pe == RTAS_UNKNOWN_SERVICE) {
- pr_info("EEH functionality not supported\n");
- return -EINVAL;
- }
-
- /* Initialize error log lock and size */
- spin_lock_init(&slot_errbuf_lock);
- eeh_error_buf_size = rtas_token("rtas-error-log-max");
- if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
- pr_info("%s: unknown EEH error log size\n",
- __func__);
- eeh_error_buf_size = 1024;
- } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
- pr_info("%s: EEH error log size %d exceeds the maximal %d\n",
- __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
- eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
- }
-
- /* Set EEH probe mode */
- eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);
-
-#ifdef CONFIG_PCI_IOV
- /* Set EEH machine dependent code */
- ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device;
-#endif
-
- return 0;
-}
static int pseries_eeh_cap_start(struct pci_dn *pdn)
{
@@ -235,46 +313,101 @@
}
/**
- * pseries_eeh_probe - EEH probe on the given device
- * @pdn: PCI device node
- * @data: Unused
+ * pseries_eeh_pe_get_parent - Retrieve the parent PE
+ * @edev: EEH device
*
- * When EEH module is installed during system boot, all PCI devices
- * are checked one by one to see if it supports EEH. The function
- * is introduced for the purpose.
+ * The whole PEs existing in the system are organized as hierarchy
+ * tree. The function is used to retrieve the parent PE according
+ * to the parent EEH device.
*/
-static void *pseries_eeh_probe(struct pci_dn *pdn, void *data)
+static struct eeh_pe *pseries_eeh_pe_get_parent(struct eeh_dev *edev)
{
+ struct eeh_dev *parent;
+ struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+
+ /*
+ * It might have the case for the indirect parent
+ * EEH device already having associated PE, but
+ * the direct parent EEH device doesn't have yet.
+ */
+ if (edev->physfn)
+ pdn = pci_get_pdn(edev->physfn);
+ else
+ pdn = pdn ? pdn->parent : NULL;
+ while (pdn) {
+ /* We're poking out of PCI territory */
+ parent = pdn_to_eeh_dev(pdn);
+ if (!parent)
+ return NULL;
+
+ if (parent->pe)
+ return parent->pe;
+
+ pdn = pdn->parent;
+ }
+
+ return NULL;
+}
+
+/**
+ * pseries_eeh_init_edev - initialise the eeh_dev and eeh_pe for a pci_dn
+ *
+ * @pdn: PCI device node
+ *
+ * When we discover a new PCI device via the device-tree we create a
+ * corresponding pci_dn and we allocate, but don't initialise, an eeh_dev.
+ * This function takes care of the initialisation and inserts the eeh_dev
+ * into the correct eeh_pe. If no eeh_pe exists we'll allocate one.
+ */
+void pseries_eeh_init_edev(struct pci_dn *pdn)
+{
+ struct eeh_pe pe, *parent;
struct eeh_dev *edev;
- struct eeh_pe pe;
u32 pcie_flags;
- int enable = 0;
int ret;
- /* Retrieve OF node and eeh device */
+ if (WARN_ON_ONCE(!eeh_has_flag(EEH_PROBE_MODE_DEVTREE)))
+ return;
+
+ /*
+ * Find the eeh_dev for this pdn. The storage for the eeh_dev was
+ * allocated at the same time as the pci_dn.
+ *
+ * XXX: We should probably re-visit that.
+ */
edev = pdn_to_eeh_dev(pdn);
- if (!edev || edev->pe)
- return NULL;
+ if (!edev)
+ return;
+
+ /*
+ * If ->pe is set then we've already probed this device. We hit
+ * this path when a pci_dev is removed and rescanned while recovering
+ * a PE (i.e. for devices where the driver doesn't support error
+ * recovery).
+ */
+ if (edev->pe)
+ return;
/* Check class/vendor/device IDs */
if (!pdn->vendor_id || !pdn->device_id || !pdn->class_code)
- return NULL;
+ return;
/* Skip for PCI-ISA bridge */
if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA)
- return NULL;
+ return;
+
+ eeh_edev_dbg(edev, "Probing device\n");
/*
* Update class code and mode of eeh device. We need
* correctly reflects that current device is root port
* or PCIe switch downstream port.
*/
- edev->class_code = pdn->class_code;
edev->pcix_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
edev->pcie_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
edev->aer_cap = pseries_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
edev->mode &= 0xFFFFFF00;
- if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
+ if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
edev->mode |= EEH_DEV_BRIDGE;
if (edev->pcie_cap) {
rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
@@ -287,49 +420,81 @@
}
}
- /* Initialize the fake PE */
- memset(&pe, 0, sizeof(struct eeh_pe));
- pe.phb = pdn->phb;
- pe.config_addr = (pdn->busno << 16) | (pdn->devfn << 8);
-
- /* Enable EEH on the device */
- ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
- if (!ret) {
- /* Retrieve PE address */
- edev->pe_config_addr = eeh_ops->get_pe_addr(&pe);
- pe.addr = edev->pe_config_addr;
-
- /* Some older systems (Power4) allow the ibm,set-eeh-option
- * call to succeed even on nodes where EEH is not supported.
- * Verify support explicitly.
- */
- ret = eeh_ops->get_state(&pe, NULL);
- if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT)
- enable = 1;
-
- if (enable) {
- eeh_add_flag(EEH_ENABLED);
- eeh_add_to_parent_pe(edev);
-
- pr_debug("%s: EEH enabled on %02x:%02x.%01x PHB#%x-PE#%x\n",
- __func__, pdn->busno, PCI_SLOT(pdn->devfn),
- PCI_FUNC(pdn->devfn), pe.phb->global_number,
- pe.addr);
- } else if (pdn->parent && pdn_to_eeh_dev(pdn->parent) &&
- (pdn_to_eeh_dev(pdn->parent))->pe) {
- /* This device doesn't support EEH, but it may have an
- * EEH parent, in which case we mark it as supported.
- */
- edev->pe_config_addr = pdn_to_eeh_dev(pdn->parent)->pe_config_addr;
- eeh_add_to_parent_pe(edev);
- }
+ /* first up, find the pe_config_addr for the PE containing the device */
+ ret = pseries_eeh_get_pe_config_addr(pdn);
+ if (ret < 0) {
+ eeh_edev_dbg(edev, "Unable to find pe_config_addr\n");
+ goto err;
}
- /* Save memory bars */
- eeh_save_bars(edev);
+ /* Try enable EEH on the fake PE */
+ memset(&pe, 0, sizeof(struct eeh_pe));
+ pe.phb = pdn->phb;
+ pe.addr = ret;
- return NULL;
+ eeh_edev_dbg(edev, "Enabling EEH on device\n");
+ ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE);
+ if (ret) {
+ eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret);
+ goto err;
+ }
+
+ edev->pe_config_addr = pe.addr;
+
+ eeh_add_flag(EEH_ENABLED);
+
+ parent = pseries_eeh_pe_get_parent(edev);
+ eeh_pe_tree_insert(edev, parent);
+ eeh_save_bars(edev);
+ eeh_edev_dbg(edev, "EEH enabled for device");
+
+ return;
+
+err:
+ eeh_edev_dbg(edev, "EEH is unsupported on device (code = %d)\n", ret);
}
+
+static struct eeh_dev *pseries_eeh_probe(struct pci_dev *pdev)
+{
+ struct eeh_dev *edev;
+ struct pci_dn *pdn;
+
+ pdn = pci_get_pdn_by_devfn(pdev->bus, pdev->devfn);
+ if (!pdn)
+ return NULL;
+
+ /*
+ * If the system supports EEH on this device then the eeh_dev was
+ * configured and inserted into a PE in pseries_eeh_init_edev()
+ */
+ edev = pdn_to_eeh_dev(pdn);
+ if (!edev || !edev->pe)
+ return NULL;
+
+ return edev;
+}
+
+/**
+ * pseries_eeh_init_edev_recursive - Enable EEH for the indicated device
+ * @pdn: PCI device node
+ *
+ * This routine must be used to perform EEH initialization for the
+ * indicated PCI device that was added after system boot (e.g.
+ * hotplug, dlpar).
+ */
+void pseries_eeh_init_edev_recursive(struct pci_dn *pdn)
+{
+ struct pci_dn *n;
+
+ if (!pdn)
+ return;
+
+ list_for_each_entry(n, &pdn->child_list, list)
+ pseries_eeh_init_edev_recursive(n);
+
+ pseries_eeh_init_edev(pdn);
+}
+EXPORT_SYMBOL_GPL(pseries_eeh_init_edev_recursive);
/**
* pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable
@@ -343,7 +508,6 @@
static int pseries_eeh_set_option(struct eeh_pe *pe, int option)
{
int ret = 0;
- int config_addr;
/*
* When we're enabling or disabling EEH functioality on
@@ -356,81 +520,18 @@
case EEH_OPT_ENABLE:
case EEH_OPT_THAW_MMIO:
case EEH_OPT_THAW_DMA:
- config_addr = pe->config_addr;
- if (pe->addr)
- config_addr = pe->addr;
break;
case EEH_OPT_FREEZE_PE:
/* Not support */
return 0;
default:
- pr_err("%s: Invalid option %d\n",
- __func__, option);
+ pr_err("%s: Invalid option %d\n", __func__, option);
return -EINVAL;
}
ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
- config_addr, BUID_HI(pe->phb->buid),
+ pe->addr, BUID_HI(pe->phb->buid),
BUID_LO(pe->phb->buid), option);
-
- return ret;
-}
-
-/**
- * pseries_eeh_get_pe_addr - Retrieve PE address
- * @pe: EEH PE
- *
- * Retrieve the assocated PE address. Actually, there're 2 RTAS
- * function calls dedicated for the purpose. We need implement
- * it through the new function and then the old one. Besides,
- * you should make sure the config address is figured out from
- * FDT node before calling the function.
- *
- * It's notable that zero'ed return value means invalid PE config
- * address.
- */
-static int pseries_eeh_get_pe_addr(struct eeh_pe *pe)
-{
- int ret = 0;
- int rets[3];
-
- if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
- /*
- * First of all, we need to make sure there has one PE
- * associated with the device. Otherwise, PE address is
- * meaningless.
- */
- ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
- pe->config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), 1);
- if (ret || (rets[0] == 0))
- return 0;
-
- /* Retrieve the associated PE config address */
- ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
- pe->config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), 0);
- if (ret) {
- pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
- __func__, pe->phb->global_number, pe->config_addr);
- return 0;
- }
-
- return rets[0];
- }
-
- if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
- pe->config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), 0);
- if (ret) {
- pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",
- __func__, pe->phb->global_number, pe->config_addr);
- return 0;
- }
-
- return rets[0];
- }
return ret;
}
@@ -438,7 +539,7 @@
/**
* pseries_eeh_get_state - Retrieve PE state
* @pe: EEH PE
- * @state: return value
+ * @delay: suggested time to wait if state is unavailable
*
* Retrieve the state of the specified PE. On RTAS compliant
* pseries platform, there already has one dedicated RTAS function
@@ -448,27 +549,21 @@
* RTAS calls for the purpose, we need to try the new one and back
* to the old one if the new one couldn't work properly.
*/
-static int pseries_eeh_get_state(struct eeh_pe *pe, int *state)
+static int pseries_eeh_get_state(struct eeh_pe *pe, int *delay)
{
- int config_addr;
int ret;
int rets[4];
int result;
- /* Figure out PE config address if possible */
- config_addr = pe->config_addr;
- if (pe->addr)
- config_addr = pe->addr;
-
if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets,
- config_addr, BUID_HI(pe->phb->buid),
+ pe->addr, BUID_HI(pe->phb->buid),
BUID_LO(pe->phb->buid));
} else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) {
/* Fake PE unavailable info */
rets[2] = 0;
ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
- config_addr, BUID_HI(pe->phb->buid),
+ pe->addr, BUID_HI(pe->phb->buid),
BUID_LO(pe->phb->buid));
} else {
return EEH_STATE_NOT_SUPPORT;
@@ -499,7 +594,8 @@
break;
case 5:
if (rets[2]) {
- if (state) *state = rets[2];
+ if (delay)
+ *delay = rets[2];
result = EEH_STATE_UNAVAILABLE;
} else {
result = EEH_STATE_NOT_SUPPORT;
@@ -521,94 +617,7 @@
*/
static int pseries_eeh_reset(struct eeh_pe *pe, int option)
{
- int config_addr;
- int ret;
-
- /* Figure out PE address */
- config_addr = pe->config_addr;
- if (pe->addr)
- config_addr = pe->addr;
-
- /* Reset PE through RTAS call */
- ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
- config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), option);
-
- /* If fundamental-reset not supported, try hot-reset */
- if (option == EEH_RESET_FUNDAMENTAL &&
- ret == -8) {
- option = EEH_RESET_HOT;
- ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
- config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid), option);
- }
-
- /* We need reset hold or settlement delay */
- if (option == EEH_RESET_FUNDAMENTAL ||
- option == EEH_RESET_HOT)
- msleep(EEH_PE_RST_HOLD_TIME);
- else
- msleep(EEH_PE_RST_SETTLE_TIME);
-
- return ret;
-}
-
-/**
- * pseries_eeh_wait_state - Wait for PE state
- * @pe: EEH PE
- * @max_wait: maximal period in millisecond
- *
- * Wait for the state of associated PE. It might take some time
- * to retrieve the PE's state.
- */
-static int pseries_eeh_wait_state(struct eeh_pe *pe, int max_wait)
-{
- int ret;
- int mwait;
-
- /*
- * According to PAPR, the state of PE might be temporarily
- * unavailable. Under the circumstance, we have to wait
- * for indicated time determined by firmware. The maximal
- * wait time is 5 minutes, which is acquired from the original
- * EEH implementation. Also, the original implementation
- * also defined the minimal wait time as 1 second.
- */
-#define EEH_STATE_MIN_WAIT_TIME (1000)
-#define EEH_STATE_MAX_WAIT_TIME (300 * 1000)
-
- while (1) {
- ret = pseries_eeh_get_state(pe, &mwait);
-
- /*
- * If the PE's state is temporarily unavailable,
- * we have to wait for the specified time. Otherwise,
- * the PE's state will be returned immediately.
- */
- if (ret != EEH_STATE_UNAVAILABLE)
- return ret;
-
- if (max_wait <= 0) {
- pr_warn("%s: Timeout when getting PE's state (%d)\n",
- __func__, max_wait);
- return EEH_STATE_NOT_SUPPORT;
- }
-
- if (mwait <= 0) {
- pr_warn("%s: Firmware returned bad wait value %d\n",
- __func__, mwait);
- mwait = EEH_STATE_MIN_WAIT_TIME;
- } else if (mwait > EEH_STATE_MAX_WAIT_TIME) {
- pr_warn("%s: Firmware returned too long wait value %d\n",
- __func__, mwait);
- mwait = EEH_STATE_MAX_WAIT_TIME;
- }
-
- max_wait -= mwait;
- msleep(mwait);
- }
-
- return EEH_STATE_NOT_SUPPORT;
+ return pseries_eeh_phb_reset(pe->phb, pe->addr, option);
}
/**
@@ -624,19 +633,13 @@
*/
static int pseries_eeh_get_log(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len)
{
- int config_addr;
unsigned long flags;
int ret;
spin_lock_irqsave(&slot_errbuf_lock, flags);
memset(slot_errbuf, 0, eeh_error_buf_size);
- /* Figure out the PE address */
- config_addr = pe->config_addr;
- if (pe->addr)
- config_addr = pe->addr;
-
- ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr,
+ ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, pe->addr,
BUID_HI(pe->phb->buid), BUID_LO(pe->phb->buid),
virt_to_phys(drv_log), len,
virt_to_phys(slot_errbuf), eeh_error_buf_size,
@@ -652,102 +655,42 @@
* pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE
* @pe: EEH PE
*
- * The function will be called to reconfigure the bridges included
- * in the specified PE so that the mulfunctional PE would be recovered
- * again.
*/
static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
{
- int config_addr;
- int ret;
- /* Waiting 0.2s maximum before skipping configuration */
- int max_wait = 200;
-
- /* Figure out the PE address */
- config_addr = pe->config_addr;
- if (pe->addr)
- config_addr = pe->addr;
-
- while (max_wait > 0) {
- ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
- config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid));
-
- if (!ret)
- return ret;
-
- /*
- * If RTAS returns a delay value that's above 100ms, cut it
- * down to 100ms in case firmware made a mistake. For more
- * on how these delay values work see rtas_busy_delay_time
- */
- if (ret > RTAS_EXTENDED_DELAY_MIN+2 &&
- ret <= RTAS_EXTENDED_DELAY_MAX)
- ret = RTAS_EXTENDED_DELAY_MIN+2;
-
- max_wait -= rtas_busy_delay_time(ret);
-
- if (max_wait < 0)
- break;
-
- rtas_busy_delay(ret);
- }
-
- pr_warn("%s: Unable to configure bridge PHB#%x-PE#%x (%d)\n",
- __func__, pe->phb->global_number, pe->addr, ret);
- return ret;
+ return pseries_eeh_phb_configure_bridge(pe->phb, pe->addr);
}
/**
* pseries_eeh_read_config - Read PCI config space
- * @pdn: PCI device node
- * @where: PCI address
+ * @edev: EEH device handle
+ * @where: PCI config space offset
* @size: size to read
* @val: return value
*
* Read config space from the speicifed device
*/
-static int pseries_eeh_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
+static int pseries_eeh_read_config(struct eeh_dev *edev, int where, int size, u32 *val)
{
+ struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+
return rtas_read_config(pdn, where, size, val);
}
/**
* pseries_eeh_write_config - Write PCI config space
- * @pdn: PCI device node
- * @where: PCI address
+ * @edev: EEH device handle
+ * @where: PCI config space offset
* @size: size to write
* @val: value to be written
*
* Write config space to the specified device
*/
-static int pseries_eeh_write_config(struct pci_dn *pdn, int where, int size, u32 val)
+static int pseries_eeh_write_config(struct eeh_dev *edev, int where, int size, u32 val)
{
+ struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+
return rtas_write_config(pdn, where, size, val);
-}
-
-static int pseries_eeh_restore_config(struct pci_dn *pdn)
-{
- struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
- s64 ret = 0;
-
- if (!edev)
- return -EEXIST;
-
- /*
- * FIXME: The MPS, error routing rules, timeout setting are worthy
- * to be exported by firmware in extendible way.
- */
- if (edev->physfn)
- ret = eeh_restore_vf_config(pdn);
-
- if (ret) {
- pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",
- __func__, edev->pe_config_addr, ret);
- return -EIO;
- }
-
- return ret;
}
#ifdef CONFIG_PCI_IOV
@@ -777,8 +720,8 @@
static int pseries_call_allow_unfreeze(struct eeh_dev *edev)
{
+ int cur_vfs = 0, rc = 0, vf_index, bus, devfn, vf_pe_num;
struct pci_dn *pdn, *tmp, *parent, *physfn_pdn;
- int cur_vfs = 0, rc = 0, vf_index, bus, devfn;
u16 *vf_pe_array;
vf_pe_array = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
@@ -811,8 +754,10 @@
}
} else {
pdn = pci_get_pdn(edev->pdev);
- vf_pe_array[0] = cpu_to_be16(pdn->pe_number);
physfn_pdn = pci_get_pdn(edev->physfn);
+
+ vf_pe_num = physfn_pdn->pe_num_map[edev->vf_index];
+ vf_pe_array[0] = cpu_to_be16(vf_pe_num);
rc = pseries_send_allow_unfreeze(physfn_pdn,
vf_pe_array, 1);
pdn->last_allow_rc = rc;
@@ -823,15 +768,12 @@
return rc;
}
-static int pseries_notify_resume(struct pci_dn *pdn)
+static int pseries_notify_resume(struct eeh_dev *edev)
{
- struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
-
if (!edev)
return -EEXIST;
- if (rtas_token("ibm,open-sriov-allow-unfreeze")
- == RTAS_UNKNOWN_SERVICE)
+ if (rtas_token("ibm,open-sriov-allow-unfreeze") == RTAS_UNKNOWN_SERVICE)
return -EINVAL;
if (edev->pdev->is_physfn || edev->pdev->is_virtfn)
@@ -843,20 +785,17 @@
static struct eeh_ops pseries_eeh_ops = {
.name = "pseries",
- .init = pseries_eeh_init,
.probe = pseries_eeh_probe,
.set_option = pseries_eeh_set_option,
- .get_pe_addr = pseries_eeh_get_pe_addr,
.get_state = pseries_eeh_get_state,
.reset = pseries_eeh_reset,
- .wait_state = pseries_eeh_wait_state,
.get_log = pseries_eeh_get_log,
.configure_bridge = pseries_eeh_configure_bridge,
.err_inject = NULL,
.read_config = pseries_eeh_read_config,
.write_config = pseries_eeh_write_config,
.next_error = NULL,
- .restore_config = pseries_eeh_restore_config,
+ .restore_config = NULL, /* NB: configure_bridge() does this */
#ifdef CONFIG_PCI_IOV
.notify_resume = pseries_notify_resume
#endif
@@ -870,15 +809,88 @@
*/
static int __init eeh_pseries_init(void)
{
- int ret;
+ struct pci_controller *phb;
+ struct pci_dn *pdn;
+ int ret, config_addr;
- ret = eeh_ops_register(&pseries_eeh_ops);
+ /* figure out EEH RTAS function call tokens */
+ ibm_set_eeh_option = rtas_token("ibm,set-eeh-option");
+ ibm_set_slot_reset = rtas_token("ibm,set-slot-reset");
+ ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2");
+ ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
+ ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
+ ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
+ ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
+ ibm_configure_pe = rtas_token("ibm,configure-pe");
+
+ /*
+ * ibm,configure-pe and ibm,configure-bridge have the same semantics,
+ * however ibm,configure-pe can be faster. If we can't find
+ * ibm,configure-pe then fall back to using ibm,configure-bridge.
+ */
+ if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE)
+ ibm_configure_pe = rtas_token("ibm,configure-bridge");
+
+ /*
+ * Necessary sanity check. We needn't check "get-config-addr-info"
+ * and its variant since the old firmware probably support address
+ * of domain/bus/slot/function for EEH RTAS operations.
+ */
+ if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE ||
+ ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE ||
+ (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
+ ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) ||
+ ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE ||
+ ibm_configure_pe == RTAS_UNKNOWN_SERVICE) {
+ pr_info("EEH functionality not supported\n");
+ return -EINVAL;
+ }
+
+ /* Initialize error log lock and size */
+ spin_lock_init(&slot_errbuf_lock);
+ eeh_error_buf_size = rtas_token("rtas-error-log-max");
+ if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
+ pr_info("%s: unknown EEH error log size\n",
+ __func__);
+ eeh_error_buf_size = 1024;
+ } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
+ pr_info("%s: EEH error log size %d exceeds the maximal %d\n",
+ __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
+ eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
+ }
+
+ /* Set EEH probe mode */
+ eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG);
+
+ /* Set EEH machine dependent code */
+ ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device;
+
+ if (is_kdump_kernel() || reset_devices) {
+ pr_info("Issue PHB reset ...\n");
+ list_for_each_entry(phb, &hose_list, list_node) {
+ // Skip if the slot is empty
+ if (list_empty(&PCI_DN(phb->dn)->child_list))
+ continue;
+
+ pdn = list_first_entry(&PCI_DN(phb->dn)->child_list, struct pci_dn, list);
+ config_addr = pseries_eeh_get_pe_config_addr(pdn);
+
+ /* invalid PE config addr */
+ if (config_addr < 0)
+ continue;
+
+ pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_FUNDAMENTAL);
+ pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_DEACTIVATE);
+ pseries_eeh_phb_configure_bridge(phb, config_addr);
+ }
+ }
+
+ ret = eeh_init(&pseries_eeh_ops);
if (!ret)
pr_info("EEH: pSeries platform initialized\n");
else
pr_info("EEH: pSeries platform initialization failure (%d)\n",
ret);
-
return ret;
}
-machine_early_initcall(pseries, eeh_pseries_init);
+machine_arch_initcall(pseries, eeh_pseries_init);
--
Gitblit v1.6.2