From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/powerpc/boot/dts/fsl/kmcent2.dts | 58 ++++++++++++++++++++++++++++++++++++++++++++++++----------
1 files changed, 48 insertions(+), 10 deletions(-)
diff --git a/kernel/arch/powerpc/boot/dts/fsl/kmcent2.dts b/kernel/arch/powerpc/boot/dts/fsl/kmcent2.dts
index 3094df0..8e7f082 100644
--- a/kernel/arch/powerpc/boot/dts/fsl/kmcent2.dts
+++ b/kernel/arch/powerpc/boot/dts/fsl/kmcent2.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Keymile kmcent2 Device Tree Source, based on T1040RDB DTS
*
@@ -5,11 +6,6 @@
* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
*
* Copyright 2014 - 2015 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
/include/ "t104xsi-pre.dtsi"
@@ -214,13 +210,19 @@
fman@400000 {
ethernet@e0000 {
- fixed-link = <0 1 1000 0 0>;
- phy-connection-type = "sgmii";
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
ethernet@e2000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "sgmii";
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
ethernet@e4000 {
@@ -233,7 +235,7 @@
ethernet@e8000 {
phy-handle = <&front_phy>;
- phy-connection-type = "rgmii";
+ phy-mode = "rgmii-id";
};
mdio0: mdio@fc000 {
@@ -262,14 +264,50 @@
pci1: pcie@ffe250000 {
status = "disabled";
+ reg = <0xf 0xfe250000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
+ 0x01000000 0 0 0xf 0xf8010000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
};
pci2: pcie@ffe260000 {
status = "disabled";
+ reg = <0xf 0xfe260000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
};
pci3: pcie@ffe270000 {
status = "disabled";
+ reg = <0xf 0xfe270000 0 0x10000>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+ pcie@0 {
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x10000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
};
qe: qe@ffe140000 {
--
Gitblit v1.6.2