From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 15 +++++++++------
1 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/kernel/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 6739697..f1acca5 100644
--- a/kernel/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/kernel/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -38,8 +38,8 @@
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
- states = <1800000 0
- 3300000 1>;
+ states = <1800000 0>,
+ <3300000 1>;
};
vddio_boot: regulator-vddio_boot {
@@ -165,6 +165,9 @@
non-removable;
disable-wp;
+ /* WiFi firmware requires power to be kept while in suspend */
+ keep-power-in-suspend;
+
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
@@ -180,11 +183,10 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
- cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
@@ -216,6 +218,7 @@
pinctrl-names = "default";
};
-&usb0 {
+&usb {
status = "okay";
+ dr_mode = "host";
};
--
Gitblit v1.6.2