From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 93 +++++++++++++++-------------------------------
1 files changed, 30 insertions(+), 63 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/kernel/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 0b1e94c..de79dcf 100644
--- a/kernel/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/kernel/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -1,45 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2015, 2016 Zodiac Inflight Innovations
- *
- * Based on an original 'vf610-twr.dts' which is Copyright 2015,
- * Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -200,6 +161,13 @@
phy-handle = <&switch1phy4>;
};
+ port@9 {
+ reg = <9>;
+ label = "sff2";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff2>;
+ };
switch1port10: port@10 {
reg = <10>;
@@ -245,6 +213,22 @@
#size-cells = <0>;
};
};
+
+ sff2: sff2 {
+ /* lower */
+ compatible = "sff,sff";
+ i2c-bus = <&sff2_i2c>;
+ los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff3: sff3 {
+ /* upper */
+ compatible = "sff,sff";
+ i2c-bus = <&sff3_i2c>;
+ los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ };
};
&dspi0 {
@@ -254,7 +238,7 @@
status = "okay";
spi-num-chipselects = <2>;
- m25p128@0 {
+ flash@0 {
compatible = "m25p128", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -290,7 +274,7 @@
* P1 - WE2_CMD
* P2 - WE2_CLK
*/
- gpio5: pca9557@18 {
+ gpio5: io-expander@18 {
compatible = "nxp,pca9557";
reg = <0x18>;
gpio-controller;
@@ -329,13 +313,6 @@
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
interrupt-controller;
-
- enet_swr_en {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "enet-swr-en";
- };
};
/*
@@ -345,7 +322,7 @@
* IO0 - WE1_CLK
* IO1 - WE1_CMD
*/
- gpio7: pca9554@22 {
+ gpio7: io-expander@22 {
compatible = "nxp,pca9554";
reg = <0x22>;
gpio-controller;
@@ -355,7 +332,7 @@
};
&i2c1 {
- at24mac602@50 {
+ eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
read-only;
@@ -378,26 +355,16 @@
reg = <0>;
};
- i2c@1 {
+ sff2_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
-
- sfp2: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
};
- i2c@2 {
+ sff3_i2c: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
-
- sfp3: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
};
i2c@3 {
--
Gitblit v1.6.2