From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/arm/boot/dts/uniphier-pro5.dtsi | 264 +++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 257 insertions(+), 7 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/uniphier-pro5.dtsi b/kernel/arch/arm/boot/dts/uniphier-pro5.dtsi
index 06c2cef..3525125 100644
--- a/kernel/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/kernel/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -131,7 +131,7 @@
ranges;
interrupt-parent = <&intc>;
- l2: l2-cache@500c0000 {
+ l2: cache-controller@500c0000 {
compatible = "socionext,uniphier-system-cache";
reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
<0x506c0000 0x400>;
@@ -144,7 +144,7 @@
next-level-cache = <&l3>;
};
- l3: l3-cache@500c8000 {
+ l3: cache-controller@500c8000 {
compatible = "socionext,uniphier-system-cache";
reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
<0x506c8000 0x400>;
@@ -154,6 +154,32 @@
cache-sets = <512>;
cache-line-size = <256>;
cache-level = <3>;
+ };
+
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>; /* common with spi0 */
+ resets = <&peri_rst 12>;
};
serial0: serial@54006800 {
@@ -386,7 +412,15 @@
};
};
- aidet: aidet@5fc20000 {
+ xdmac: dma-controller@5fc10000 {
+ compatible = "socionext,uniphier-xdmac";
+ reg = <0x5fc10000 0x5300>;
+ interrupts = <0 188 4>;
+ dma-channels = <16>;
+ #dma-cells = <2>;
+ };
+
+ aidet: interrupt-controller@5fc20000 {
compatible = "socionext,uniphier-pro5-aidet";
reg = <0x5fc20000 0x200>;
interrupt-controller;
@@ -431,16 +465,232 @@
};
};
- nand: nand@68000000 {
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host";
+ interrupts = <0 134 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pro5-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pro5-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pro5-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_hsphy0: hs-phy@280 {
+ compatible = "socionext,uniphier-pro5-usb3-hsphy";
+ reg = <0x280 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy0: ss-phy@380 {
+ compatible = "socionext,uniphier-pro5-usb3-ssphy";
+ reg = <0x380 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host";
+ interrupts = <0 137 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pro5-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pro5-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pro5-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pro5-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_hsphy0: hs-phy@280 {
+ compatible = "socionext,uniphier-pro5-usb3-hsphy";
+ reg = <0x280 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+
+ usb1_hsphy1: hs-phy@290 {
+ compatible = "socionext,uniphier-pro5-usb3-hsphy";
+ reg = <0x290 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ vbus-supply = <&usb1_vbus1>;
+ };
+
+ usb1_ssphy0: ss-phy@380 {
+ compatible = "socionext,uniphier-pro5-usb3-ssphy";
+ reg = <0x380 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
+ pcie_ep: pcie-ep@66000000 {
+ compatible = "socionext,uniphier-pro5-pcie-ep",
+ "snps,dw-pcie-ep";
+ status = "disabled";
+ reg-names = "dbi", "dbi2", "link", "addr_space";
+ reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+ <0x66010000 0x10000>, <0x67000000 0x400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 24>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 24>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ num-lanes = <4>;
+ phy-names = "pcie-phy";
+ phys = <&pcie_phy>;
+ };
+
+ pcie_phy: phy@66038000 {
+ compatible = "socionext,uniphier-pro5-pcie-phy";
+ reg = <0x66038000 0x4000>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 24>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 24>;
+ };
+
+ nand: nand-controller@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
- resets = <&sys_rst 2>;
+ pinctrl-0 = <&pinctrl_nand>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+ reset-names = "nand", "reg";
+ resets = <&sys_rst 2>, <&sys_rst 2>;
+ };
+
+ emmc: mmc@68400000 {
+ compatible = "socionext,uniphier-sd-v3.1";
+ status = "disabled";
+ reg = <0x68400000 0x800>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&sd_clk 1>;
+ reset-names = "host", "hw";
+ resets = <&sd_rst 1>, <&sd_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd: mmc@68800000 {
+ compatible = "socionext,uniphier-sd-v3.1";
+ status = "disabled";
+ reg = <0x68800000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
};
};
};
--
Gitblit v1.6.2