From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/arm/boot/dts/r8a7790-lager.dts | 30 ++++++++++++++++++------------
1 files changed, 18 insertions(+), 12 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/r8a7790-lager.dts b/kernel/arch/arm/boot/dts/r8a7790-lager.dts
index 7b9508e..1d6f0c5 100644
--- a/kernel/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/kernel/arch/arm/boot/dts/r8a7790-lager.dts
@@ -53,10 +53,13 @@
i2c11 = &i2cexio1;
i2c12 = &i2chdmi;
i2c13 = &i2cpwr;
+ mmc0 = &mmcif1;
+ mmc1 = &sdhi0;
+ mmc2 = &sdhi2;
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -150,8 +153,7 @@
gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
vcc_sdhi2: regulator-vcc-sdhi2 {
@@ -174,8 +176,7 @@
gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
- states = <3300000 1
- 1800000 0>;
+ states = <3300000 1>, <1800000 0>;
};
audio_clock: audio_clock {
@@ -325,10 +326,10 @@
#size-cells = <0>;
};
- /*
- * IIC2 and I2C2 may be switched using pinmux.
- * A fallback to GPIO is also provided.
- */
+ /*
+ * IIC2 and I2C2 may be switched using pinmux.
+ * A fallback to GPIO is also provided.
+ */
i2chdmi: i2c-12 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
@@ -345,7 +346,6 @@
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
- remote = <&vin1>;
port {
adv7180: endpoint {
@@ -366,8 +366,6 @@
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
- adi,input-style = <1>;
- adi,input-justification = "evenly";
ports {
#address-cells = <1>;
@@ -423,6 +421,8 @@
*/
i2cpwr: i2c-13 {
compatible = "i2c-demux-pinctrl";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
i2c-parent = <&iic3>, <&i2c3>;
i2c-bus-name = "i2c-pwr";
#address-cells = <1>;
@@ -615,6 +615,11 @@
function = "iic3";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
hsusb_pins: hsusb {
groups = "usb0_ovc_vbus";
function = "usb0";
@@ -669,6 +674,7 @@
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
+ reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
};
};
--
Gitblit v1.6.2