From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/arm/boot/dts/meson.dtsi | 125 +++++++++++++++++++++--------------------
1 files changed, 64 insertions(+), 61 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/meson.dtsi b/kernel/arch/arm/boot/dts/meson.dtsi
index 2486feb..c928ae3 100644
--- a/kernel/arch/arm/boot/dts/meson.dtsi
+++ b/kernel/arch/arm/boot/dts/meson.dtsi
@@ -1,71 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-/include/ "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
interrupt-parent = <&gic>;
-
- L2: l2-cache-controller@c4200000 {
- compatible = "arm,pl310-cache";
- reg = <0xc4200000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
-
- gic: interrupt-controller@c4301000 {
- compatible = "arm,cortex-a9-gic";
- reg = <0xc4301000 0x1000>,
- <0xc4300100 0x0100>;
- interrupt-controller;
- #interrupt-cells = <3>;
- };
soc {
compatible = "simple-bus";
@@ -79,6 +23,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xc1100000 0x200000>;
+
+ hhi: system-controller@4000 {
+ compatible = "amlogic,meson-hhi-sysctrl",
+ "simple-mfd",
+ "syscon";
+ reg = <0x4000 0x400>;
+ };
assist: assist@7c00 {
compatible = "amlogic,meson-mx-assist", "syscon";
@@ -182,6 +133,13 @@
status = "disabled";
};
+ sdhc: mmc@8e00 {
+ compatible = "amlogic,meson-mx-sdhc";
+ reg = <0x8e00 0x42>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
gpio_intc: interrupt-controller@9880 {
compatible = "amlogic,meson-gpio-intc";
reg = <0x9880 0x10>;
@@ -197,10 +155,36 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
- timer@9940 {
+ timer_abcde: timer@9940 {
compatible = "amlogic,meson6-timer";
reg = <0x9940 0x18>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 11 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ L2: cache-controller@c4200000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xc4200000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ periph: bus@c4300000 {
+ compatible = "simple-bus";
+ reg = <0xc4300000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc4300000 0x10000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0x1000 0x1000>,
+ <0x100 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
};
};
@@ -233,6 +217,15 @@
#size-cells = <0>;
status = "disabled";
};
+
+ rtc: rtc@740 {
+ compatible = "amlogic,meson6-rtc";
+ reg = <0x740 0x14>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
};
usb0: usb@c9040000 {
@@ -243,6 +236,9 @@
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb0_phy>;
phy-names = "usb2-phy";
+ g-rx-fifo-size = <512>;
+ g-np-tx-fifo-size = <500>;
+ g-tx-fifo-size = <256 192 128 128 128>;
dr_mode = "host";
status = "disabled";
};
@@ -296,4 +292,11 @@
};
};
};
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
}; /* end of / */
--
Gitblit v1.6.2