From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config

---
 kernel/arch/arm/boot/dts/imx51-babbage.dts |   65 +++++++++++++++++++++++++-------
 1 files changed, 50 insertions(+), 15 deletions(-)

diff --git a/kernel/arch/arm/boot/dts/imx51-babbage.dts b/kernel/arch/arm/boot/dts/imx51-babbage.dts
index 9919146..552196d 100644
--- a/kernel/arch/arm/boot/dts/imx51-babbage.dts
+++ b/kernel/arch/arm/boot/dts/imx51-babbage.dts
@@ -58,27 +58,25 @@
 
 	display1: disp1 {
 		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1>;
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: dvi {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
+
+		port@0 {
+		reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
 			};
 		};
 
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
 			};
 		};
 	};
@@ -111,6 +109,42 @@
 		port {
 			display1_in: endpoint {
 				remote-endpoint = <&ipu_di1_disp2>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
 			};
 		};
 	};
@@ -205,6 +239,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
 		fsl,mc13xxx-uses-rtc;
 
 		regulators {

--
Gitblit v1.6.2